GSR B240PX for Berlin rental company

Mann Hebebühnenmietung expands its GSR fleet

The compyny Mann is a specialist company for ceiling and roofing, as well as for plumbing and carpentry work up to facade work in Berlin. The aerial lifts are also rented. The portfolio includes trailer platforms, truck platforms, mobile cranes, construction hoists, fall protection and other construction machinery.
There are currently five GSR truck-mounted work platforms and several DENKA•LIFT trailer platforms in the rental program.

Another GSR B240PX on Mercedes Benz Sprinter 314CDI was recently added.
The main reason for buying the B240PX was its good up-and-over reach, which is ideal for most roofs in Berlin. The model offers variable stabilisers (one-sided, narrow or wide), 23.70m working height, 250kg basket load and a maximum lateral reach of 12.30m.

Rothlehner Arbeitsbühnen - GSR B240PX for Berlin rental company
Ein Mitarbeiter vom Mann Hebebühnenverleih nimmt den neuen GSR B240PX in Berlin in Empfang

The rental company Mann has opted for the following options for this device:

automatic levelling
side wall 100 mm
cab roof protection
traffic cone holder
Rotating beacon on driver’s cab

 

We wish you every success with the new GSR B240PX Comfort !

Rothlehner Arbeitsbühnen - GSR B240PX for Berlin rental company
Rothlehner Arbeitsbühnen - GSR B240PX for Berlin rental company

Easylift R190 for C & C Baumaschinen

Spider Lift R190 for maintenance and cleaning of photo-voltaic systems

Company owner Christian Kuhfs from Lützen in Saxony Anhalt specializes in civil engineering and assembly work for PV systems, as well as their rental and maintenance. So far, working platforms have been rented for works at height.

Now the decision was made to buy their own spider lift, whereby the choice fell on an Easylift R190. The main reason is the simple control, the appealing performance data and a good price-performance ratio.
Mr. Kuhfs has opted for non-marking gray chains, an automatic levelling function, large shims and a flashing light on the basket as special equipment.

Rothlehner Arbeitsbühnen - Easylift R190 for construction company
C

The track mounted R190 is particularly suitable for off-road requirements, for narrow access roads and areas with low floor loads. The climbing ability is 30% slope. Particularly noteworthy in this model is the variable and sectional outrigger setting with enormously lift, the compact dimensions and the very simple operation. Hoses for air and water are also part of the standard equippment.

With a working height of 18.50m, a maximum lateral reach of 11m and a maximum basket load of 200kg, the R190 is suitable for a wide range of applications. The total weight of the fully hydraulic chain work platform is approx. 2,830kg. The overall height is just under 2m and the minimum passage width (without basket) is approx. 0.93m, the minimum transport length is 4.80m. The work basket can be rotated by 180°. The device has a hybrid drive as standard, consisting of a 230V mains drive and a Honda GX390 petrol engine.

We wish you every success with the new Easylift R190!

Rothlehner Arbeitsbühnen - Easylift R190 for construction company
Beispielbild Easylift R190
Rothlehner Arbeitsbühnen - Easylift R190 for construction company

Easylift R180 spider lift goes to Sulingen

 

painting company receives 18m aerial lift

Recently we delivered an 18m articulated telescope spider lift Easylift R180 to Sulingen. The painting company Fischer has been offering its customers for more than 20 years painting work in the interior and exterior, as well as wood protection work and facade plastering work.

For their works at height the company around the manager Helmut Fischer and his daughter Katrin Fischer has invested in their own spider lift. With a working height of 17.60m, a maximum lateral reach of 8.5m at 120kg, as well as a maximum basket weight of 200kg, the R180 is the ideal device for a variety of applications.

Rothlehner Arbeitsbühnen - Easylift R180 spider lift goes to painting company
malermeisterbetrieb fischer in sulingen erhaelt easylift raupen arbeitsbuehne r180 von rothlehner

As a drive, this model offers a standard standard hybrid drive made of 230V mains & Honda GX390 petrol engine. Emission-free use in the interior is therefore just as possible as the powerful maneuvering in the exterior. A width-adjustable chain chassis, 2,330kg weight, minimum passage width of 0.89m and a min. length of 4.78 m make this model very suitable for narrow access roads and areas with low soil load.

The delivered unit features the optiona equipment “automatic levelling”.

Rothlehner Arbeitsbühnen - Easylift R180 spider lift goes to painting company
Rothlehner Arbeitsbühnen - Easylift R180 spider lift goes to painting company

GSR B220TJ goes to Saxony Anhalt

Service companies of the city of Zeitz receive 22m jib truck work platforms

Stadtreinigungs- und Servicebetrieb Zeitz GmbH has received a GSR B220TJ Comfort truck-mounted work platform.
The device on the MB Sprinter 314CDI has a lot of useful equipment, for example 1,000V isolation, automatic levelling and home function. The B220TJ Comfort is stabilised variably, i.e. narrow, wide, or on one side.
The operator has a working height of 22.0 m, a basket load of 250 kg and a maximum lateral reach of 14.00 m.
The jib can be moved by 130°; In combination with the 180° rotatable basket, even difficult locations can be controlled perfectly.

SSBZ has already got more machines from Rothlehner in its fleet. For example there is also an MB Sprinter 516 CDI with a 14m platform structure in the fleet (GSR E140TJV Basic), as well as a trailer work platform type DENKA•LIFT DK25.

Rothlehner Arbeitsbühnen - GSR B220TJ goes to the city of Zeitz
v.l.: Herr Bradatsch, Herr Friedemann und Herr Heinrich bei der Übergabe des GSR B220TJ im Bauhof der Stadt Zeitz

The very good service support provided by the Lift-Manager headquarters in Jänkendorf is also decisive for the purchase.

We wish you every success with the new GSR B220TJ!

Rothlehner Arbeitsbühnen - GSR B220TJ goes to the city of Zeitz

Three DENKA•LIFT DK18 for Hobrack

Rental company receives bundle of three DK18

Ronald Hobrack’s rental company in Bautzen, Saxony offers its customers a complete range of all types of work platforms, as well as forklifts, cranes, excavators and material lifts. The connection between Rothlehner and Ronald Hobrack goes back to the 1990s when the first DENKA•LIFTs were purchased.

At the end of 2021, the order for three pieces of DENKA•LIFT DK18 was placed, of which the last of the three devices has now been handed over.

Rothlehner Arbeitsbühnen - Three DENKA•LIFT DK18 for Hobrack
Ronald Hobrack vor seiner Firmenzentrale, zusammen mit den drei DENKA•LIFT DK18

The rental company is expanding the range of 18m telescopic trailer platforms to meet the increasing demand for these flexible rental devices. The proximity to the Lift Manager Service is also a decisive factor for Hobrack work platform rental.

The DENKA•LIFT DK18 offers a working height of 18m, a maximum reach of 11.30m and a basket load of 200kg. The Denka devices are characterized by simple operation, durability and high value retention. Like all DENKA•LIFT models, the DK 18 also offers a large working range and fast, precise movements.

All three devices were ordered with the popular options “automatic levelling” and “permanently mounted LED rear lights”.

Rothlehner Arbeitsbühnen - Three DENKA•LIFT DK18 for Hobrack

Bienhold Arbeitsbühnen takes over another DK18

Berlin rental company receives another DENKA-LIFT

Bienhold Arbeitsbühnen GmbH offers all common categories of work platforms in the Berlin area and can already look back on more than 25 years of company history. Now the partner lift company has added another DENKA•LIFT DK18 to the rental fleet.

The telescopic trailer platform DK18 offers 18m working height, 11.30m maximum range and 200kg basket load. The Denka devices are characterized by simple operation, durability and high value retention. Like all DENKA•LIFT models, the DK 18 also offers a large working range and fast, precise movements.
The managing directors Marco and Thomas Bienhold have opted for a Honda power generator, the automatic levelling function and a permanently mounted LED basket lighting as special equipment.

We wish you every success!

Rothlehner Arbeitsbühnen - Berlin rental company receives another DENKA-LIFT DK18
thomas und marco bienhold mit der anhaenger arbeitsbuehne Denka-Lift DK18_text
Rothlehner Arbeitsbühnen - Berlin rental company receives another DENKA-LIFT DK18

13m spider lift for “Happy to have GmbH”

“Happy to have GmbH” from Seevetal south of Hamburg specializes in the manufacture of safety bollards made of stainless steel. In the in-house production, high-quality barrier bollards for securing parking lots, house and garage entrances, properties and public places are manufactured. The product portfolio also includes ceiling lifts for beamers and projectors as well as drives for sliding gates. Everything handmade in Germany.

The new Easylift R130 spider lift will be used to carry out assembly works in the future. With a working height of 12.20m and a lateral range of 6.5m with a basket load of 200kg, the agile R130 covers many areas of application. Thanks to the standard 230V and Honda direct drive, the R130 is also ideal for working indoors. The cable control with automatic levelling function was chosen as an option.
The matching Vlemmix transport trailer was ordered at the same time.

We wish you every success with the new Easylift R130!

Rothlehner Arbeitsbühnen - Easylift R130 track mount goes to Hamburg
Rothlehner Arbeitsbühnen - Easylift R130 track mount goes to Hamburg
Rothlehner Arbeitsbühnen - Easylift R130 track mount goes to Hamburg
Rothlehner Arbeitsbühnen - Easylift R130 track mount goes to Hamburg

Electric 15m scissor lift delivered

Bathow Haustechnik from Bernsdorf in Oberlausitz received a Haulotte HS15E.

The group of companies around Stephan Bathow has specialized in building technology and roofing services in two companies.
Several working platforms are already being used for the work at height.

The new all-electric HS15E offers a working height of 15.00 m and a capacity of 750 kg with a weight of 7,480 kg. The platform can be extended to a maximum length of 7.4 m and offers space for 4 people.

A powerful all-wheel drive with differential lock also offers good traction off-road. The hydraulic outriggers with automatic leveling compensate for unevenness if necessary.

As an option, Bathow Haustechnik has opted for work lights and flashing lights, as well as a removable range extender (for fast charging), and a 230V socket on the platform

We wish you every success with the new Haulotte HS15E!

Rothlehner Arbeitsbühnen - Haulotte HS15E for Bathow company
Rothlehner Arbeitsbühnen - Haulotte HS15E for Bathow company
Herr Bathow und Herr Opitz bei der Inbetriebnahme der neuen Haulotte HS15E
Rothlehner Arbeitsbühnen - Haulotte HS15E for Bathow company

13 meter spider lift goes to Wilhelmshaven

The company NiWo offers facility management around the house. From facility management, renovations to garden maintenance. Owner Wolfgang Tjarks and his team are working in the greater Wilhelmshaven area, Germany.

The new Easylift R130 track mount platform is mainly intended for tree cutting and cleaning work on houses. With a working height of 12.20m and a lateral reach of 6.5m with a basket load of 200kg, the agile R130 covers many areas of application.  With a 230V and Honda direct drive, the R130 is also ideal for working indoors. The cable control with automatic levelling and bright chains was chosen as an option.

The device has a width-adjustable chain chassis and is very manoeuvrable with a length of 4.25 m; the basket is removable (minimum passage width 0.84m), which reduces the minimum maneuvering length to just 3.55m. The support area is 2.60 x 2.60 m. This fully hydraulic caterpillar platform is characterised by an easy-to-use control system.

We wish you every success with the new Easylift R130!

Rothlehner Arbeitsbühnen - Easylift R130 for NiWo Facility Management
NiWo employees Jörg Hansen and Gerriet Beeken look forward to working with the new Easylift R130
Rothlehner Arbeitsbühnen - Easylift R130 for NiWo Facility Management

18m DENKA top seller goes into Lausitz

Ronald Hobrack’s rental company in Großpostwitz near Bautzen, Germany offers its customers a complete range of all types of work platforms, as well as forklifts, cranes, excavators and material lifts. At the end of 2021 Hobrack Arbeitsbühnenvermietung GmbH placed an order with Rothlehner for three DENKA•LIFT DK18 models. The first machine from this package has now been handed over to the company headquarters in Großpostwitz.

The rental company is thus expanding its range of 18m telescopic trailer platforms to meet the increasing demand for these flexible rental equipment. The proximity to the lift manager service is also a decisive factor for Hobrack work platform rental.

All three devices were ordered with the popular “automatic levelling” and “permanently mounted LED taillights” options.

Rothlehner Arbeitsbühnen - DENKA•LIFT DK18 for rental company Hobrack
v.l.: Ronald und Steve Hobrack nehmen den ersten von drei neuen DENKA
Rothlehner Arbeitsbühnen - DENKA•LIFT DK18 for rental company Hobrack
Rothlehner Arbeitsbühnen - DENKA•LIFT DK18 for rental company Hobrack

New 25m telescopic trailer for roofing specialist

Kai Müller Dachtechnik GmbH from Plauen in Saxony has replaced an older DENKA•LIFT DK25 with a new device of the same type.
The DK25 has proven itself in the height operations of the Müller company and is mainly used for assembly and maintenance.

Like all DENKA•LIFT models, the DK 25 also offers a large working range and fast, precise movements thanks to the stable telescopic boom made of aluminum.
The powerful hydraulic maneuvering drive is standard and makes it easier to move the work platform quickly at the place of use. Thanks to the sensitive proportional control and the rotating work basket, even difficult jobs can be done safely and quickly.

Rothlehner Arbeitsbühnen - Kai Müller Dachtechnik replaces DENKA•LIFT DK25
Firmeninhaber Kai Müller nimmt den neuen DENKA•LIFT DK25 in Empfang

The delivered model has the optional petrol generator Honda EU30iS, as well as a permanently mounted LED basket lighting (instead of the standard removable light bar).

We wish Kai Müller’s team always successful operations with the new DENKA•LIFT DK25!

Rothlehner Arbeitsbühnen - Kai Müller Dachtechnik replaces DENKA•LIFT DK25
Nach der Anlieferung wurde das Gerät durch Sven Illgen (Firma Rothlehner) übergeben und eingewiesen.

Partner lift company expands GSR rental fleet

After the handover of a Europelift TM16TJ trailer platform in October, the H & M work platform rental company has now added another GSR to its fleet.

With its max. 14m lateral reach and max.250kg basket load, the 20m telescope model GSR B200T flexibly covers a large number of rental applications. The B200T Comfort X comes as standard with variable stabilisers (one-sided, narrow or wide) and a 140° rotatable basket.
The special equipment of the device, which is painted in the company color, includes an automatic levelling + home function, as well as a rotating beacon, a protective saw edge on the basket, a roof protection and a side wall.

We wish Jörg Hunecke and Nils Metzner from H&M Arbeitsbühnen and their team successful operations with the new GSR B200T at all times!

Rothlehner Arbeitsbühnen - H & M Arbeitsbühnen receives another GSR
Jörg Hunecke (rechts) von H&M Arbeitsbühnen übernimmt den neuen GSR B200T von Stephan Opfer (Rothlehner Arbeitsbühnen GmbH)
Rothlehner Arbeitsbühnen - H & M Arbeitsbühnen receives another GSR

Berlin rental company receives DENKA’s trailer-flagship 

After two DENKA• IFT DK25 and one Europelift TM13T at the end of 2020, “bt sky-lift zeilinga gmbh” has now received another DENKA•LIFT DL30. The 30m device is the trailer working platform with the greatest working height on 3,500kg worldwide .

In addition to its headquarters in Berlin, the company of company founder Christian Zeilinga operates other rental locations in Schwerin, Frankfurt/Oder, and as “Riedl Telelift-Verleih GmbH” in Hamburg. At Zeilinga, there has always been a special focus on the “special machines” sector such as the Denka Narrow or Spider-Lifts on chain and wheel chassis, with which the company serves a popular niche for difficult jobs.

In addition to the generous standard equipment, the DL30 supplied has an optional gasoline generator with 3kV.

Rothlehner Arbeitsbühnen - Zeilinga takes over a new DENKA•LIFT DL30
Christian Zeilinga (rechts), übernimmt den neuen DL30 von Roland Jäkel (GF Lift-Manager)

At the handover, Mr. Zeilinga attached importance to take a photo in front of the portrait of “Old Fritz” – Prussian King Friedrich the Great (1712-1786), which adorns his company building.

Rothlehner Arbeitsbühnen - Zeilinga takes over a new DENKA•LIFT DL30

Top News about work platforms 

We present the new 43th issue of our magazine “bühnenSPIEGEL”.

As always we provide interesting topics regarding the Rothlehner Group of companies, new products and Information from our main suppliers, as well as News from Lift-Manager Service.

You can read the pdf document here:  bühnenSPIEGEL  November 2021

 

If you have questions on certain topics, or if you want to have a printed copy, just let us know:  info@rothlehner.de  /  +49 8724 9601-0

Rothlehner Arbeitsbühnen - The new Bühnenspiegel is available

Easy Lift spiders for the Orion Access rental fleet

original article from Easylift

In collaboration with its UK dealer Independent Access Sales, Easylift has delivered three spider lifts to rental company Orion Access Services.

Orion Access, a company founded in 1988 in Kent, boasts over thirty years of experience in the access sector and offers for hire various types of aerial platforms from 7 to 70 meters height for all types of work at height including truck-mounted, scissors, self-propelled and tracked platforms. This company, born as a company specialized in window cleaning, has grown over time to become a point of reference for the rental sector both with operator and without operator in England.

The small spider R130 is in great demand for its compactness, ideal for indoor and outdoor use, reaching a working height of 12.20 m and an outreach of 6.50 m with 200 kg of load capacity in the basket.

The R210 tracked aerial platform, can reach 21.20 m height and has a horizontal outreach of 11.00 m, a basket rotation of 180° and a turret rotation of 360°. In addition to a petrol or diesel engine, it is available in both lithium battery version (R210BA) and hybrid version (R210HY) that combines the combustion engine with lithium battery.

Finally, the RA31 platform allows you to reach a working height of 30.20 m, with an outreach of 12.00 m with 230 kg of load capacity in the basket.

 

For its fleet, Orion Access has chosen diesel engine, wire control and non-marking tracks for the R130, the hybrid version for the R210 and the RA31, the latter also equipped with self-levelling.

Rothlehner Arbeitsbühnen - Easylift RA31, R210 and R130 for Orion Access
Rothlehner Arbeitsbühnen - Easylift RA31, R210 and R130 for Orion Access
Rothlehner Arbeitsbühnen - Easylift RA31, R210 and R130 for Orion Access

Work platform rental company Schröder & Wilsdorf receives its 32nd Denka lift

The two managing directors Erik Wilsdorf and Jan-Uwe Schröder started renting work platforms in 1992. The first Denka-Lifts were bought in the year of foundation and rented out mainly in the greater Leipzig area.
Schröder & Wilsdorf GBRmbH recently received its 32nd DENKA•LIFT. The new DK18 replaces a 15 year old used device of the same model.

The DENKA•LIFT DK18 offers 18m working height, 11.30m maximum reach and 200kg basket load. The Denka devices are characterized by ease of use, durability and high value retention. Like all DENKA•LIFT models, the DK 18 also offers a large working range and fast, precise movements.
S&W opted for the “automatic levelling” option for the new device, as this feature is very popular with rental customers.

Rothlehner Arbeitsbühnen - DENKA • LIFT DK18 for long-term customer in Leipzig
denka lift dk18 an vermieter schroeder und wilsdorf_text

Wir wünschen jederzeit erfolgreiche Vermiet-Einsätze mit dem DK18 !

Rothlehner Arbeitsbühnen - DENKA • LIFT DK18 for long-term customer in Leipzig
Rothlehner Arbeitsbühnen - DENKA • LIFT DK18 for long-term customer in Leipzig

Baustoffhandel Witschel takes over 18m articulated telescopic work platform

For more than 20 years, “Baustoffhandel Witschel GmbH” has been offering an extensive range of DIY stores in the Grossenhain region north of Dresden.
From building materials to gardening supplies and rental equipment to animal supplies; As a free building materials dealer who does not belong to any cooperation, the family owned company can react quickly to new market situations.

Now the Witschel family has invested in their own work platform.
The choice fell on the Europelift TM18GT model.

Rothlehner Arbeitsbühnen - Family business receives Europelift TM18GT
Gerät-Übernahme durch drei Generationen der Familie Witschel. v.l.: Steffen, Gabriele, Maik, und Karl Witschel

The TM18GT with a working height of 18 m and a lateral range of 10.50 m is ideally suited for use in and on buildings thanks to its compact dimensions and the “up and over” function. With the 1.3 m long cage arm and the 90° rotatable cage, the locations can be controlled perfectly. The TM18GT in special paint RAL 9005 jet black is driven by a 230V mains & Honda direct drive.

We wish you successful operations with the new TM18GT at all times!

Rothlehner Arbeitsbühnen - Family business receives Europelift TM18GT
Rothlehner Arbeitsbühnen - Family business receives Europelift TM18GT

Painting and facade company receives 21m track-mount platform

The “Master of Colors” from Eberswalde, Germany have been offering their customers professional services in Brandenburg and Berlin since 2007. The core competencies of managing director András Szegedi and his team of around 20 employees include painting and facade work, as well as laying floor coverings.

The company has now invested in its own track-mount spider-lift for its work at heights. The EasyLift R210 offers a full 21.20m working height, a maximum of 11.00m lateral reach and a maximum of 200kg basket load.
Thanks to the minimal passage width of 0.89m and height of 1.99m, the chain-mounted work platform fits through most access roads and also cuts a fine figure in the field.
With a movable basket arm and a rotating work basket, you can reach a large number of locations.

Rothlehner Arbeitsbühnen - Easylift R210 for Master of Colors
Herr Szegedi und Andras und Thomas Dahms

The electro-hydraulic control with a hybrid drive consisting of 230V mains & Honda GX390 petrol engine, as well as the variable levelling and a cable remote control are standard. The device for the Master of Color is additionally equipped with the option “automatic-levelling” and non-marking gray chains.

Rothlehner also supplied the appropriate transport trailer.

We wish you successful operations with the new R210 crawler work platform at all times!

Rothlehner Arbeitsbühnen - Easylift R210 for Master of Colors
Rothlehner Arbeitsbühnen - Easylift R210 for Master of Colors

Rental company receives Europelift TM16TJ

“H & M Arbeitsbühnen” rents out work platforms of all categories, as well as construction machinery and landscaping equipment in northern Germany. The  company of managing director Jörg Hunecke and Nils Metzner recently expanded its rental park with a Europelift TM16TJ trailer platform with a jib arm.

The TM16TJ model recently underwent a facelift and now has, among other things, the new outriggers, offering more working height. The key data are 16m working height, 10m lateral reach and a maximum of 200kg in the basket. A 1.3 m long movable jib arm with a rotating work basket, hydraulic maneuvering drive and 230V operation plus a Honda GX160 are standard. In this trailer-platform class, the jib of the Europelift TJ series is a unique selling point on the market.

The Rendsburger rental company has opted for the battery drive.

Rothlehner Arbeitsbühnen - 16m trailer platform with jib for H&M work platforms
v.l. Jörg Hunecke nimmt den neuen Europelift TM16TJ in Rendsburg von Stephan Opfer (Rothlehner Arbeitsbühnen) in Empfang
Rothlehner Arbeitsbühnen - 16m trailer platform with jib for H&M work platforms
Rothlehner Arbeitsbühnen - 16m trailer platform with jib for H&M work platforms

TM13T and TM16GT go to Austria

As an example for many projects in Austria, we report here on two deliveries of Europelift trailer platforms.
The devices were handed over by Bernhard Spörk (Head of the Rothlehner Austria branch) and properly instructed.

Rothlehner Arbeitsbühnen - More Europelifts delivered

TM16GT for Photovoltaik Freyenschlag

The TM16GT trailer platform is intended to facilitate the assembly, maintenance and cleaning of the photovoltaic systems in the future. In particular, Mr. Freyenschlag was enthusiastic about the compact design and simple operation. The calm behavior of the stage despite the large range made the instruction perfect.

Rothlehner Arbeitsbühnen - More Europelifts delivered

TM13T for Kaminsanierung Baumgartner

The TM18GT, which has been in use for 4 years, has got a little brother – the TM13T.
Nadine and Daniel Baumgartner couldn’t imagine the stages without them and have now taken over the 13m stage with great joy.

We wish you always successful operations with the new Europelift platforms!

News from Rothlehner Austria:

Since the beginning of the cooperation with the Italian platform manufacturer EASYLIFT,
Rothlehner has already delivered several dozen devices to its customers.

Bernhard Spörk (Head of the Rothlehner Austria branch) was able to deliver 5 more track mount platforms to their new owners in a short time.

Rothlehner Arbeitsbühnen - Several Easylift spider-lifts delivered in a short time

R130 for the Jost company

We have been working together with the family business Jost for almost 30 years, which we appreciate a lot.
In 1994 the first 18m DENKA•LIFT was bought, followed by other trailer platforms with 12 and 25 meters, scissor lifts, self-propelled and also a truck platform with 19m.

Rothlehner Arbeitsbühnen - Several Easylift spider-lifts delivered in a short time

R180 for DMD Metalltechnik

As a young entrepreneur, Mr. Milan Dajic from “DMD Metalltechnik” relies on an R180 track-mount for his future works at height.

Rothlehner Arbeitsbühnen - Several Easylift spider-lifts delivered in a short time

R180 for MBT Kogler

Mr. Kogler is expanding his rental park with the R180. He was particularly impressed by the range, the ease of use and the Easylift R130 he already had in the rental fleet.

Rothlehner Arbeitsbühnen - Several Easylift spider-lifts delivered in a short time

R180 and R130 for Redono

Mr. Dominic Nowotny starts with two track mounts from Easylift with the newly founded rental company “Redono” in the Vienna area. The first spider lift has now been successfully handed over and used immediately.

We wish you always successful operations with the new Easylift crawler platforms!

Austrian rental company is expanding its range of truck-mounted work platforms

Pehofer GmbH from Neunkirchen in Lower Austria has been producing high-quality gravel and ready-mixed concrete since 1979. In addition, construction machinery and work platforms of all categories are rented out.

The family company with around 65 employees and several locations in Lower Austria and Styria has mainly purchased large Haulotte machines from Rothlehner in recent years (HA20RTJ Pro, HA26RTJ Pro, H18SXL etc.).
Now we were also able to accept the order for two GSR B240PX Comfort X. The first of these was recently delivered to Neunkirchen.

Rothlehner Arbeitsbühnen - Pehofer GmbH receives two GSR B240PX
Von rechts: Peter Pehofer und Josef Dorfstätter übernehmen den ersten GSR B240PX von Bernhard Spörk (Rothlehner Österreich)

The B240PX in company color RAL 1021 offers a working height of 23.70 m, a basket load of 250 kg and a maximum horizontal outreach of 12.30 m.
The articulated telescopic work platform with ergonomic operation and robust construction has, among other things, an electro-hydraulic proportional control and a 140° rotatable basket as standard. H-stabilisers are used at the front, vertical outriggers at the rear.
The special equipment includes runum beacons and an automatic-levelling.

We wish you successful operations with the new GSR 240PX truck work platforms at all times!

Rothlehner Arbeitsbühnen - Pehofer GmbH receives two GSR B240PX

Solar provider invests in 18m work platform

Solaritec GmbH from Rangsdorf, south of Berlin, recently received a Europelift TM18GT from Rothlehner.

Managing director Thomas Runge’s company leases roofs on which a photovoltaic system is installed. In addition to the lease payment, the lessors receive an all-round carefree package; Solaritec takes care of official matters as well as the installation and maintenance of the system.

The TM18GT with 18m working height and 10.50m lateral reach will be used for assembly and repair work. The machine will be used primarily in the area of inverter replacement. Thanks to its compact dimensions and the “up and over” function, the articulated telescopic work platform is ideally suited for Solitec’s purposes. With the 1.3 m long cage arm and the 90 ° rotatable cage, the locations can be controlled perfectly.

Rothlehner Arbeitsbühnen - Solaritec GmbH receives Europelift TM18GT

We wish you successful operations with the Europelift TM18GT at all times!

Rothlehner Arbeitsbühnen - Solaritec GmbH receives Europelift TM18GT
Rothlehner Arbeitsbühnen - Solaritec GmbH receives Europelift TM18GT

New DK25 replaces 32 year old Denka

The Botanical Garden Berlin has replaced an older 25m DENKA•LIFT trailer platform with a new DK25 device.

With the year of construction 1989, this device was certainly among the oldest that are in work in Germany to date.
With regular care, maintenance and repairs, nothing stands in the way of a DENKA•LIFT for a long working platform life. Above all, the telescopic arms made of extruded aluminum profiles make the devices stable, light and valuable.

The DK25 offers a working height of 25 m, a basket load of 200 kg and a range of 11.40 m and can be used in a very versatile manner in the botanical garden as a flexible, lightweight all-round device. The device supplied has, among other things, a petrol generator, scraper brushes at the end of the telescope, a removable angle arm, cut protection on the basket and bio-oil filling.

Rothlehner Arbeitsbühnen - Botanical Garden Berlin receives DENKA•LIFT DK25
Übergabe und Einweisung im botanischen Garten an den Nutzer in der Maschine Herrn Schiemann.
Rothlehner Arbeitsbühnen - Botanical Garden Berlin receives DENKA•LIFT DK25

German rental company renews DENKA•LIFT inventory

Gerken GmbH has had DENKA•LIFTs in its rental program since the 1990s.

Two new DENKA type DK25 trailer-mount work platforms were recently delivered to Düsseldorf, the headquarters of Gerken. The 25m telescopic devices DK25 offer 11.40m horizontal outreach and 200kg maximum basket load with a dead weight of less than 2.5 tons.

The production of DENKA-LIFTs was taken over by Rothlehner in 2013. Since then, the devices have been produced and further developed in Germany.

Rothlehner Arbeitsbühnen - Two DK25 for Gerken
v.l.: Herr Kecmezi (Mitarbeiter Firma Gerken) übernimmt den neuen DK25 von Herrn Kapp (Firma Rothlehner / Lift-Manager)
Rothlehner Arbeitsbühnen - Two DK25 for Gerken

16m trailer platform with hybrid drive

The “DRK Landesverband Rheinland Pfalz” from Bitburg has received a Europelift TM16GT trailer working platform.
The order was brokered and implemented by the local machine dealer “Roths GmbH”.

The Europelift TM16GT offers a working height of 15.75 m, a basket load of 220 kg and a lateral reach of 8.10 m in the entire working area. The main features of this articulated telescopic work platform are compact dimensions and the “up and over” function for overcoming obstacles.

Rothlehner Arbeitsbühnen - Europelift TM16GT in use at the German Red Cross
v.l.: Michael Hemmes und Hans Valerius vom DRK, Thomas Krauß (Rothlehner Arbeitsbühnen) und Werner Roths (Roths GmbH)

A 230V drive is standard. The device supplied was also equipped with a direct petrol drive. The TM16GT has a 1.3 m long movable jib and a rotating work cage, which makes it particularly easy to maneuver at height. The proportional, electro-hydraulic control is easy to maintain and user-friendly.

We wish you always successful operations with the Europelift TM16GT!

Rothlehner Arbeitsbühnen - Europelift TM16GT in use at the German Red Cross
Rothlehner Arbeitsbühnen - Europelift TM16GT in use at the German Red Cross

Rental company receives new telescopic trailer platforms

Kreutzberger work platform rental, with its headquarters in Kronshagen near Kiel, rents around 500 work platforms and forklifts of all common categories in Schleswig-Holstein and Hamburg.

The last package delivered consisted of two Europelift TM13T telescopic trailer platforms.
Europelift TM13T offers a basket load of 220kg and a lateral reach of 9 meters. With the help of the low weight of 1,580kg, a standard maneuvering drive and a clearance height of less than 2m, the TM13T can also reach areas that are difficult to access.

Rothlehner Arbeitsbühnen - Two Europelift TM13T for Kreutzberger

All Europelift models (with working heights from 13m to 18m) score with their excellent price-performance ratio. Landlords and tradespeople are important customers for trailer work platforms. End users regularly choose Europelifts because of their easy handling and robust, purpose-oriented equipment. Many different drive variants are available.

We wish you successful operations with the two new Europelifts at all times!

Rothlehner Arbeitsbühnen - Two Europelift TM13T for Kreutzberger
Rothlehner Arbeitsbühnen - Two Europelift TM13T for Kreutzberger

Elektro Heidan invests in a refurbished GSR E200T

The master company for electrical and lightning protection systems from Neschwitz near Bautzen recently received an overhauled GSR E200T. Company owner Frank Heidan and his team offer lightning protection and cable installations, as well as photovoltaics, building technology and services.

The 20 meter telescopic device GSR E200T, built in 2015, was overhauled and technically and optically repaired by Lift-Manager. The TÜV has been redesigned and the DGUV safety test has been updated by our specialist staff.

The E200T offers a working height of 20.20 m, a basket load of 200 kg and a lateral reach of a maximum of 11.70 m. With variable levelling, rotatable basket and robust, simple technology, the 3.5 t device is ideally suited for a variety of uses.

We wish you successful operations with the GSR E200T at all times!

Rothlehner Arbeitsbühnen - Used GSR goes to electrical company
Mr. Heidan (right) and his employee take over the GSR E200T at Lift-Manager Jänkendorf from Carol Buder (left)

With a proper preparation, a second or third stage life for all work platform categories is possible at any time and makes economic sense. We are happy to help you.

At Rothlehner / Lift-Manager we usually offer three possible quality levels:

A: Technically and visually revised, partially repainted
B: Technically revised with optical concessions
C: Functional, ready to use

Boels Rental and Easy Lift boast of a long-standing collaboration.

(Original-Artikel von Easylift und vertikal.net)

Boels Rental, established in 1977 in Sittard in the Netherlands, after the acquisition of Cramo in 2020, now has more than 720 branches in 18 European countries.

Over the years, the multinational company has specialized in all-round rental, from earth-moving machinery to railway equipment, from forklifts to compressors, from construction machinery to equipment for green maintenance, from aerial platforms to equipment for parties and events.

The long-standing collaboration with a well-established reality at European level such as Boels in the rental sector in general and in the lifting sector in particular is a source of great pride for Easy Lift.

Also this year, the Dutch rental company has shown its appreciation for Easy Lift tracked aerial platforms, deciding to order 32 new spiders in the small range, R130 and R160.

In mid-July the first 6 spiders were delivered, all R160, reaching a working height of 15.60 m, with a side  outreach of 7.50 m. The tracked platforms ordered by Boels were requested with a standard petrol engine and some optional accessories such as non-marking tracks and pads for stabilizers, in addition to special painting.

In light of this new sale we can proudly say that Easy Lift spiders continue to be protagonists in the rental fleet of Boels Rental.

Rothlehner Arbeitsbühnen - Boels Rental receives 32 spider lifts from Easylift
Rothlehner Arbeitsbühnen - Boels Rental receives 32 spider lifts from Easylift
Rothlehner Arbeitsbühnen - Boels Rental receives 32 spider lifts from Easylift
Rothlehner Arbeitsbühnen - Boels Rental receives 32 spider lifts from Easylift

Flood tragedy in Germany – We donate to the THW Foundation

What the THW is able to do in terms of civil protection and disaster control, it is currently proving again impressively.
Among the many donation accounts for those affected by the unbelievable storm catastrophe, we decided on the THW Foundation.
Around 80,000 volunteers from the THW work around the clock for all of us all year round – in dangerous high-risk situations, in storms and disasters.

Rothlehner Arbeitsbühnen - Flood aid: Donation to the THW

Top News about work platforms 

We present the new 42th issue of our magazine “bühnenSPIEGEL”.

As always we provide interesting topics regarding the Rothlehner Group of companies, new products and Information from our main suppliers, as well as News from Lift-Manager Service.

You can read the pdf document here:  bühnenSPIEGEL  July 2021

 

If you have questions on certain topics, or if you want to have a printed copy, just let us know:  info@rothlehner.de  /  +49 8724 9601-0

Rothlehner Arbeitsbühnen - The new Bühnenspiegel is here

13m telescope replaces older trailer working platforms

Maschinenring Service GmbH in the eastern Tauber district, south of Würzburg Germany, primarily offers its members agricultural machines for rent. But there are also work platforms and other equipment available.

The machine-ring recently exchanged an older trailer platform for a new model. The choice was a Europelift TM13T because of the good performance data.  The compact 13m telescopic trailer platform offers a basket load of 220kg and a lateral reach of 9 meters. With the help of the low weight of approx. 1,600kg, a standard maneuvering drive and a clearance height of less than 2m, the TM13T can also reach areas that are difficult to access. An electro-hydraulic proportional control, as well as a rotating basket and a basket 230V socket are also standard. A hybrid drive, consisting of a 230V mains & direct petrol drive, is used as the drive for the delivered device.

We wish you always successful operations with the TM13T!

Rothlehner Arbeitsbühnen - Rental cooperation receives Europelift TM13T
Benedikt Dertinger vom Maschinenring bei der Fahrzeugübergabe.
Rothlehner Arbeitsbühnen - Rental cooperation receives Europelift TM13T
Rothlehner Arbeitsbühnen - Rental cooperation receives Europelift TM13T

Europelift TM13T and GSR B180T for Manfred Barth GmbH

Manfred Barth GmbH from Donnersdorf near Schweinfurt has been renting out work platforms and forklifts of all kinds since 1992; There are currently around 40 working platforms in the rental park. Company founder Manfred Barth had already invested in the first 25 meter of DENKA•LIFT from Rothlehner in the mid-1990s.

At the beginning of the year, the two managing directors Manfred and Mathias Barth replaced an older truck-mount platform with a new GSR B180T with automatic levelling & home function. 3 months later, the order for a Europelift TM13T trailer platform followed.

Now both devices have been delivered in a package to Donnersdorf and handed over to the Barth family.

We wish you successful operations with the new work platforms at all times!

Rothlehner Arbeitsbühnen - Rental Company receives two new machines
v.l.: Matthias, Kornelia, und Manfred Barth nehmen den TM13T und den B180T in Empfang
Rothlehner Arbeitsbühnen - Rental Company receives two new machines

Electrical company receives 22m telescopic truck with jib-arm

“ET König GmbH” from Scheifling in Austrian Styria has taken over a GSR B220TJ on Mercedes Benz.
The team around managing director Harald König offers not only a retail store and an online shop, but also all electrical installation work on site. The company is a professional partner, for example for photovoltaic and storage systems, or lightning protection and fire alarm systems. The 22m telescopic truck work platform will in future be used throughout Austria for assembly work, among other things.

The GSR B220TJ provides the operator with a working height of 22.0 m, a basket load of 250 kg and a maximum lateral reach of 14.00 m. The jib can be moved by 130°; in combination with the basket that can be rotated by 180°, even difficult locations can be reached well. The device with electrohydraulic control uses H-outriggers at the front and rear. The stabilisers can be chosen variably, i.e. narrow, wide or to one sided.

For the special equipment options, ET König GmbH opted for a “walk-in” basket, automatic levelling & home function and rotating beacons.

Rothlehner Arbeitsbühnen - GSR B220TJ goes to Austria
Geschäftsführer Harald König (rechts) übernimmt den GSR B220TJ von Thomas Biedermann (Service-Leiter Rothlehner Österreich)
Rothlehner Arbeitsbühnen - GSR B220TJ goes to Austria
Rothlehner Arbeitsbühnen - GSR B220TJ goes to Austria

Easylift R180 with a suitable Vlemmix D transport trailer

DHS GmbH, based in Beelitz south of Berlin, recently took over an Easylift R180. Managing Director Kai Pilgrimowski’s company specializes in renovation works on buildings. For repair work on facades, for example, they have now invested in an own 18m working platform. The choice is the Easylift R180 track-mount work platform.

The R180 offers a working height of 17.60m, a maximum outreach of 8.5m, and a basket load of 200kg, and is the ideal device for a variety of applications. With a total weight of 2,380kg, a minimum passage width of 0.89m and a height of 1.95m, this crawler platform is suitable for narrow access routes in the field and for areas of application with low floor loads. This machine is driven by a 230V mains drive and a Hatz diesel engine. The delivered device was ordered with top equipment: including radio remote control and automatic levelling.

The company also ordered the right transport trailer.
The compact “Vlemmix Model D” with a payload of 2,750kg is ideal for such compact track-mount platforms.

Rothlehner Arbeitsbühnen - 18m Raupen-Arbeitsbühne für Bauunternehmen
Kai Pilgrimowski (links) und ein Mitarbeiter beim ersten Test des R180
Rothlehner Arbeitsbühnen - 18m Raupen-Arbeitsbühne für Bauunternehmen
Der Easylift R180 wird vom Vlemmix Transportanhänger abgeladen
Rothlehner Arbeitsbühnen - 18m Raupen-Arbeitsbühne für Bauunternehmen

14m articulated platform on all-terrain Ford Ranger 4×4

LR Gebäudereinigung GmbH from Barnstorf in Lower Saxony has received a GSR E140P on a Ford Ranger 4×4. The company has been offering all types of cleaning work since 1953. In industry, in kindergartens, schools and retirement homes, or in hospitals. Exterior cleaning and the renovation of facades and floors are also part of the range of services. The Ford dealership Ahlers from Barnstorf established the contact between LR Gebäudereinigung GmbH and Rothlehner.

The compact articulated telescopic work platform is particularly suitable for the assembly and maintenance of street lighting. With a support width of only 2.12 m, the device can also cope with narrow streets. 13.25m working height, 6.05m lateral reach and 250kg basket load form the performance data of the GSR E140P. The truck platform is to be used mainly for cleaning work and small tree maintenance work. A trailer coupling is part of the special equipment.

We always wish you successful operations with the new truck-mounted work platform!

Rothlehner Arbeitsbühnen - Building cleaner receives new GSR E140P device
(v.l.) Arnold Bergmann und Tobias Wilhelm von der
Rothlehner Arbeitsbühnen - Building cleaner receives new GSR E140P device
Rothlehner Arbeitsbühnen - Building cleaner receives new GSR E140P device

Rental company increases trailer fleet with TM18GT and TM13G

The long-standing customer Wocken from Meppen had ordered two Europelifts, a TM13G and a TM18GT.
The TM18GT from this order is the 300th Europelift that Rothlehner has brought onto the market after eight years of cooperation with the Hungarian manufacturer.

‘WOCKEN Industriepartner GmbH & Co. KG’ is the general point of contact for industrial and craft companies and offers wholesale, service and a rental shop comprising 400,000 products, including approx. 400 aerial work platforms and construction equipment in all common categories. The company, which has around 300 employees and is headquartered in Meppen in the Emsland region, looks back on over 70 years of history and is now run by the second generation of Martin and Robert Wocken.
Rothlehner was able to deliver the first DENKALIFTs to Wocken as early as the early 1990s.

Rothlehner Arbeitsbühnen - Europelift number 300 goes to Wocken
Jens Burrichter (links, Leiter des Wocken Miet-Shops) übernimmt das 300ste Europelift Gerät -einen TM18GT- von Stephan Opfer (Rothlehner Arbeitsbühnen - Vertrieb Nord). Rechts daneben der TM13G

The articulated telescope TM18GT offers 18m working height, 10.50m lateral reach and 200kg basket load with a weight of 2t.
The articulated platform TM13G offers 13.10 m working height, 6.2 m lateral reach and 220 kg in the basket, with a weight of 1,450 kg. Like all Europelifts, both trailer working platforms have a proportional control, a movable cage arm and a rotatable cage including a socket. The Wocken company decided to use a 24V battery drive for both devices.

All Europelift models (with working heights from 13m to 18m) score with their excellent price-performance ratio. Landlords and tradespeople are important customers for trailer work platforms. End users regularly choose Europelifts because of their ease of use and robust, purpose-oriented equipment. Many different drive variants are available.

We wish you successful operations with the two new Europelifts at all times!

Rothlehner Arbeitsbühnen - Europelift number 300 goes to Wocken
Rothlehner Arbeitsbühnen - Europelift number 300 goes to Wocken

Electrical specialist company expands work platform fleet

“ELEKTRO Wieshoff GmbH”, based in Witten, offers a wide range of services related to electrical installations and appliances. Building and house technology, communication and security systems, as well as service and maintenance are among the competencies of the specialist company, which was founded in 1955 and is now being continued in the third generation by Heinrich Wieshoff.

Rothlehner has a history of more than 20 years with the company Elektro Wieshoff. At the end of the 90s, the company invested in its first DENKA • LIFT. Further devices – including self-propelled and truck-mounted work platforms – followed.
The company has now expanded its fleet of truck-mounted aerial platforms with a GSR B230T.

The GSR B230T on an MB Sprinter offers a basket load of 250 kg and reaches a maximum working height of 22.30 m, as well as a maximum lateral reach of approx. 14.00 m. Exceptional performance data in this stage category.
H-supports that can be supported variably are used at the front and rear. The device has a dynamic speed control, which increases the operating speed.
The scope of delivery for Elektro Wieshoff includes the equipment options “support automatic and home function”.

Rothlehner Arbeitsbühnen - GSR B230T for Electro Wieshoff
Günter Wieshoff (rechts) übernimmt den GSR B230T von Thomas Krauß (Rothlehner Arbeitsbühnen) in der Lift-Manager Service-Niederlassung Datteln
Rothlehner Arbeitsbühnen - GSR B230T for Electro Wieshoff

New DK18 for the cleaning professionals

The company “Die Reinigungsprofis” from , Germany are specialists in cleaning photovoltaic systems and buildings. Janitorial services are also offered by the young team around managing director Balazs Lehoczki.

Our trailer work platforms are the perfect support for the company’s work at heights.
The aging DENKALIFT DK18 was a loyal companion for a long time and has now been replaced by a structurally identical new device.

The telescopic trailer platform DK18 offers 18m working height, 11.30m maximum lateral reach and 200kg basket load.
In addition to the optional equipment “LED lightbar” and “brushes at the telescopic end”, the water connection that is fixed to the work basket makes cleaning work much easier at height.

Rothlehner Arbeitsbühnen - Cleaning Company changes old Denka DK18 to new oneBalazs Lehoczki (left) takes over the new DENKA • LIFT DK18 in Massing from Martin Schmidt (Rothlehner work platforms)

 

We wish you always successful operations with the new DK18!

Rothlehner Arbeitsbühnen - Cleaning Company changes old Denka DK18 to new one

rental company receives GSR E140TJV truck work platform

Olaf Meyer’s rental company recently received another GSR. From two branches near Hamburg and the headquarters in Hohenwested, the company rents out work platforms, forklifts and accessories of all kinds throughout Northern Germany. In total, there are well over 300 machines in the rental park.

The GSR fleet was recently expanded to include the E140TJV Basic panel van model. Built on a Ford Transit with 3.5 t, this device offers a working height of 13.80 m, a lateral reach of 7.70 m and a basket load of 250 kg.

The device is supported by two inclined supports in the middle of the vehicle, which can also be controlled from the work basket. With the 130 ° movable jib, many places can be reached. For example, suitable for street or Christmas lighting, repairs, tree maintenance, signage, electrical installation, or other municipal requirements.

Rothlehner Arbeitsbühnen - Meyer Lift erweitert GSR-Flotte um E140TJV

The delivered model has great features, including:
Walk-in work basket GRP, 1,000 V insulation, limited lifting function without support, rotating beacons on the rotating tower, cable remote control on the floor control station.

In addition to DENKA • LIFT models, the company has also invested in a number of telescopic and articulated telescopic trucks of the GSR brand over the years. Most recently in 2018 in an E140P on a Ford Ranger 4×4 with a trailer hitch.

Rothlehner Arbeitsbühnen - Meyer Lift erweitert GSR-Flotte um E140TJV

Rothlehner Arbeitsbühnen - Meyer Lift erweitert GSR-Flotte um E140TJV
Rothlehner Arbeitsbühnen - Meyer Lift erweitert GSR-Flotte um E140TJV

Painting company receives track-mount work platform

Markus Enzi’s specialist painting company in Deutschlandsberg in Styria, Austria recently received an Easylift R130. The company offers all services related to the painting trade.
For the work at heights, investments have now been made in a dedicated 13m crawler platform.

 

Rothlehner Arbeitsbühnen - Easylift R130 goes to painting company in Austria

Markus Enzi and his son Phillipp receive the R130 platform

With a working height of 12.20m and a lateral reach of 6.5m with a 200kg basket load, the manoeuvrable lift covers many areas of application. With a total weight of only 1,700kg, a width of 0.89m and a height of less than 2m, the caterpillar working platform is also suitable for narrow access routes in the field and for areas of application with low floor loads. The device has a width-adjustable chain chassis and is very maneuverable with a length of 4.25 m. The standard includes a hybrid drive consisting of a 230V power supply and a Honda GX390 petrol engine.
The painting company opted for a cable remote control and an automatic levelling as special equipment.

We wish you always successful operations with the new Easylift R130 aerial work platform!

Rothlehner Arbeitsbühnen - Easylift R130 goes to painting company in Austria

The first test deployment followed promptly

Rothlehner Arbeitsbühnen - Easylift R130 goes to painting company in Austria

The safe alternative for ladders, scaffolding and easels

The INSTANT LIFT IX1330 micro scissor lift brings the operator to a working height of 6 meters.
Thanks to its minimal dimensions, the device fits through pretty much every door, and with a weight of 565kg it can also be transported in many elevators.

As a versatile helper, the device is a safe replacement for many a ladder, easel, or scaffolding.
The elimination of the drive motors means that the “push-around” work platforms that can be moved by hand are very low-maintenance.
There are parking brakes on the wheels. Approved for 2 people on the platform.

Because they are easy to use, they can be used flexibly, e.g. for equipping shelves, installation work, or cleaning and painting work

Rothlehner Arbeitsbühnen - New at Rothlehner: Instant Lift IX1330
Rothlehner Arbeitsbühnen - New at Rothlehner: Instant Lift IX1330
Rothlehner Arbeitsbühnen - New at Rothlehner: Instant Lift IX1330
Rothlehner Arbeitsbühnen - New at Rothlehner: Instant Lift IX1330

Grasser Elektrotechnik invests in Easylift R130

Markus Grasser’s electrical company from Reichertsheim in Germany recently received an Easylift R130 track-mounted platform. The company specializes in the installation and maintenance of compressors and other electrical devices.

In future, the compact Easylift R130 on a crawler chassis will be used for all sorts of work at heights. With a working height of 12.20m and a lateral reach of 6.5m with a 200kg basket load, the manoeuvrable lift covers many areas of application. The low weight of only 1,700kg, the width of 0.89m and a clearance height of less than 2m enable the crawler-platform to be accessed through narrow paths and into areas with low floor loads. The R130 has a width-adjustable chain-chassis and is very maneuverable with a length of 4.25 m. The standard includes a hybrid drive consisting of a 230V power supply and a Honda GX390 petrol engine.

The ordered device has the options automatic levelling, a cable remote control and non-marking gray chains.

We wish you always successful operations with the new Easylift R130 aerial work platform!

Rothlehner Arbeitsbühnen - 13m track-mounted platform for electrical company

Markus Grasser (right) receives the Easylift R130 in Massing from Martin Schmidt (Rothlehner Arbeitsbühnen)

Rothlehner Arbeitsbühnen - 13m track-mounted platform for electrical company
Rothlehner Arbeitsbühnen - 13m track-mounted platform for electrical company

Wittrock Group receives another GSR truck-mount

The company LiFTPROFi GmbH in Ganderkesee, Germany is part of the Wittrock Group. The company-group rents a total of around 1,500 work platforms, cranes and other construction site vehicles as well as heavy-duty equipment in over 20 locations. The Ganderkesee-Team around managing director Aziz Aras mainly serves the Bremen area and northern Germany.

The Liftprofi company is one of the first rental companies to have invested in the new jib device GSR B220TJ.
The 22m telescope model is based on the same modular system as the B180T, B200T and B230T series, which were successfully introduced last year.

The operator has a working height of 22.0m, a basket load of 250kg and a maximum lateral reach of 14.00m.
The jib can be moved by 130°; In combination with the basket that can be rotated by 180°, even difficult locations can be perfectly reached. With the device with electro-hydraulic control, extendable H-stabilisers are used at the front and rear. The outriggers can be chosen variably, i.e. narrow, wide or to one side.

Rothlehner Arbeitsbühnen - GSR B220TJ for rental company LiFTPROFi

Managing director Aziz Aras receives the new GSR B220TJThe device delivered in RAL 2011 has, among other things, the options “Automatic Lvelling & Home Function” and a Walk-In basket.

Above all, the performance data, the ease of use and the good workmanship were convincing. The new B220TJ will expand the existing GSR fleet within the Wittrock Group.

We wish you successful operations with the new truck-mount at all times!

Rothlehner Arbeitsbühnen - GSR B220TJ for rental company LiFTPROFi
Rothlehner Arbeitsbühnen - GSR B220TJ for rental company LiFTPROFi
Rothlehner Arbeitsbühnen - GSR B220TJ for rental company LiFTPROFi

Painting company increases its fleet with a 23m telescopic truck-mount

The painting business company owner Wolfgang Adlbauer in Schwanberg, Austria looks back on 60 years of history. The company is a competent partner for all painting work indoors and outdoors, as well as for floor laying, shading, special coatings, and much more.

Already in 2017, Mr. Adlbauer invested in a 15m articulated telescopic trailer platform from Rothlehner; a Europelift TM15GT.
Now the fleet has been expanded to include a GSR truck-mounted platform of the type B230T Comfort X.

The GSR B230T Comfort X on an MB Sprinter offers a basket load of 250kg and reaches a maximum working height of 23.00m, as well as a maximum outreach of 14.00m. Exceptional performance data in this stage category. Extendable H-Stabilisers are used at the front and rear. The device has a dynamic speed control, which increases the operating speed.  Product video  B230T

The delivered device has, among other things, the following special equipment:  Automatic-Levelling & Home-Function, flashing lights, and side walls

We wish you always successful operations with the new truck platform!

Rothlehner Arbeitsbühnen - GSR B230T goes to Austria

from left: Wolfgang Adlbauer takes over the GSR B230T from Bernhard Spörk (Rothlehner Austria)

18m track-mount for Bernd Luthardt

Bernd Luthardt’s company from Meeder, Germany offers all services around the house from a single source.  Doors, windows, floors, walls, chimney stoves, painting / drywall work, core renovations, caretaker services, winter service, and much more.

For his work at heights, Mr. Luthardt recently invested in an 18m crawler work platform of the Easylift R180 type.
With a working height of 17.60m, a maximum horizontal reach of 8.5m / 120kg, and a maximum basket load of 200kg, the R180 is the ideal device for a variety of uses.

Rothlehner Arbeitsbühnen - Craftman Business invests in Easylift R180

from left: Bernd, Laura and Stefan Luthardt

With a total weight of 2,380kg, a minimum passage width of 0.89m and a height of 1.95m, this chain cahssis platform is suitable for narrow access routes in rough terrain and for areas with low floor loads. With the 90° movable jib arm, even hard-to-reach places can be worked on. The device with fully hydraulic control has a width-adjustable chain chassis and is very maneuverable with a length of 5.48 m. The work basket can be rotated 180° and detached, reducing the minimum length to 4.78 m. The stabilized area is 3.10 x 3.10 m. This fully hydraulic platform is characterized by an easy-to-use control system.
This model offers a hybrid drive with 230V mains & Honda GX390 petrol engine. The special equipment of the delivered model includes, among other things, non-marking chains, a cable remote control, and an automatic levelling function.

We wish you always successful operations with the new Easylift R180 aerial work platform!

Rothlehner Arbeitsbühnen - Craftman Business invests in Easylift R180
Rothlehner Arbeitsbühnen - Craftman Business invests in Easylift R180
Rothlehner Arbeitsbühnen - Craftman Business invests in Easylift R180

Köthen Energie GmbH receives new GSR E140P

Köthen Energie GmbH is a private energy service provider and sees itself as a reliable municipal partner for energy supply and other services such as street lighting and development authority. Köthen Energie is a 100% subsidiary of MVV Energie AG. As an attractive and family-friendly employer, the GmBh employs around 38 people.

Recently the company changed an older truck mounted aerial platform against a new GSR E140P on the all-terrain Ford Ranger. The compact articulated telescopic work platform is particularly suitable for the assembly and maintenance of street lighting. With a support width of only 2.12 m, the device can also cope with narrow streets. 13.25m working height, 6.05m lateral reach and 250kg basket load form the performance data of the GSR E140P. Special options such as two rotating beacons, a large storage box and 1,000V insulation complete the device from Köthen Energie.

We always wish you successful operations with the new truck-mounted work platform!

Rothlehner Arbeitsbühnen - GSR E140P goes to Saxony-Anhalt

From left: Dennis Reinicke and Christoph Saretzki from Köthen Energie GmbH receive the new GSR E140P

Rothlehner Arbeitsbühnen - GSR E140P goes to Saxony-Anhalt
Rothlehner Arbeitsbühnen - GSR E140P goes to Saxony-Anhalt

13m articulated platform for THW locations in Chemnitz and Leipzig

Recently, two Europelift TM13Gs in ultramarine blue were delivered to the THW.  The THW handles a vast number of different tasks with a large proportion of volunteers. No matter what kind of technical assistance is required, the volunteer helpers at THW are masters of their craft. The right equipment is crucial in use.

The two 13m trailer platforms are used in the Leipzig and Chemnitz locations. The articulated telescopic work platform  Europelift TM13G offers 13.10 m working height, 6.2 m lateral outreach and 220 kg in the basket, with a weight of 1,450 kg. The standard equipment includes a 145° movable cage arm, a rotating work cage, a 230V socket in the cage and a maneuvering drive. The Europelift TM13G can be powered by a 230V mains drive and a Honda power generator.

Rothlehner Arbeitsbühnen - THW Sachsen receives two European lifts TM13G

From left: Mr. Epperlein and Mr. Haase from THW Chemnitz receive their new Europelift TM13G

Among other things, the devices will be used in the future for laying power cables and other work at heights. It is also checked whether it can be used as a light mast during night operations. Rothlehner has already delivered corresponding reference devices to the THW in the past.

Rothlehner Arbeitsbühnen - THW Sachsen receives two European lifts TM13G

 

Rothlehner Arbeitsbühnen - THW Sachsen receives two European lifts TM13G
Rothlehner Arbeitsbühnen - THW Sachsen receives two European lifts TM13G

The specialist for electrical systems invests in a 20m articulated telescopic truck work platform

“Köcher Elektro- und Industrieservice” from Parthenstein, south-east of Leipzig, Germany has received a truck-mounted platform from Rothlehner.   Tino Köcher’s specialist company is a specialist in electrical systems of all kinds; from alarm and fire alarm systems to antenna and satellite technology to regenerative energy systems.

A GSR B200PX Compact will now be used for work at heights in electrical installation or street lighting. The truck-mounted work platform with a working height of 20.10 m offers a basket load of 300 kg in the full working area, with a maximum range of 8.60 m. Built on a Mercedes Benz 311 CDI, the articulated telescopic work platform has vehicle-wide stabilisers with vertical outriggers at front and rear. The GSR B200PX Compact offers a rotating basket, cab collision protection, and much more.

We wish you successful missions at all times!

Rothlehner Arbeitsbühnen - Köcher Electro company receives new GSR B200PX

Tino Köcher takes over the GSR B200PX Compact in icy temperatures in Jänkendorf

Rothlehner Arbeitsbühnen - Köcher Electro company receives new GSR B200PX
Rothlehner Arbeitsbühnen - Köcher Electro company receives new GSR B200PX

Hilbert & Vogel Group receives refurbished Denka-Lift DK3MK25

The Hilbert & Vogel group of companies from Gera, Germany offers everything in the housing sector. Above all, thermal insulation systems and the renovation of real estate are the company’s core competencies. As well as all facade or painting work.

The shareholders Mr. Hilbert and Mr. Vogel have recently invested in their own 25m telescopic trailer work platform for the work at heights. The DENKA•LIFT 2500 DK3MK25, built in 1994, was technically and optically refurbished by Lift-Manager. Among other things, Haydraulik hoses and cabling were renewed and visual repairs were carried out.    (Product Video:  Denka-Lift  DK25)

The machine will be used primarily in the field of facade renovation and maintenance.

We wish you successful missions at all times!

 

Rothlehner Arbeitsbühnen - Reconditioned 25m Denka-Lift used device delivered

Mr. Vogel receiving his DK3MK25

With proper and extensive refurbishment, a second or third “life” for a DENKA•LIFT from the 90s is possible at any time and makes economic sense.

At Rothlehner / Lift-Manager we usually offer three possible quality levels:

A: Technically and visually revised, partially repainted
B: Technically revised with optical concessions
C: Functional, ready to use

Rothlehner Arbeitsbühnen - Reconditioned 25m Denka-Lift used device delivered
Rothlehner Arbeitsbühnen - Reconditioned 25m Denka-Lift used device delivered