Year of construction: 2019
On Nissan Cabstar 35.13,   mileage: 50,700km

Working height: 17.70 m
Basket load: 300 kg / 2 people
Rotation range: 450°
Reach sideways: 12.70 m / 80 kg
Total weight: 3,500 kg
Passage width: approx. 2.27 m
Headroom: approx. 2.99 m
Total length: approx. 6.23 m

Electro-hydraulic proportional control
Telescopic boom steel
Load moment limitation
Aluminum work basket, rotatable 2 x 70°
Basket size: 0.70 x 1.40 x 1.10 m
variable stabilisers, narrow and wide
H-outriggersat the front, verticals at the back
Shim plates with holder
Driver’s cab – collision protection
Operating hours counter
230V socket in the basket
Automatic levelling with home function
Rotating beacon
Storage box with flap
Navigation device permanently installed
4 pieces of lashing eyes on platform

Working height: 12.00 m
Basket load: 300 kg
Platform size: 2.30 m x 1.20 m
Platform displacement: 0.92 m
Own weight: approx. 2630 kg
Turning radius: 2.50 m (outside)
Climbing ability: 23%
Passage width: 1.20 m
Headroom: 2.38 m
Minimum headroom: 1.26 m
Total length: 2.42 m
Ground clearance: 0.13 m
approx. 473 operating hours

Battery drive 24 V, charger fully automatic
Travel drive 2-wheel, max.: 3.50 km/h
Inclinometer 3°
Operating hours counter
Charging indicator
Tires solid rubber, gray, 38 x 13 x 5 cm

The compact PB ECo S78-7EL offers a working height of 7.80 m both indoors and out. With the sensitive proportional control for all directions (drive, lift, lower), the stage can be comfortably moved and maneuver the platform vertically upwards.
The platform of the platform offers a size of 1.63 mx 0.74 m and is equipped with a load capacity of 230 kg. An additional shift of 0.90 m enlarges the platform, which can accommodate 2 people including material and tools.

With a length of 1.86 m, a width of 0.76 m, and a total height of 2.14 m, the scissor lift presents itself comparatively slim. With the easy to fold railing, the height can be reduced again to a compact 1.83 m. Due to its low weight of 1,570 kg, its 90 ° steering and the small turning radius, the PB ECo S78-7EL can be moved quickly and manoeuvrable – and without any problems at full height.

After the GSR B220PXE there is now also the larger and very popular B240PX on ISUZU carrier vehicle.

This model is characterized by compact dimensions and a vertical COMPACT variant. Compared to the B240PX on Mercedes, the Isuzu is around one meter shorter and 20cm narrower. This maneuverability is particularly effective in cramped inner-city streets.
Because the engine is located further back, the B240PX Isuzu has the ability to achieve its full lateral reach beyond the driver’s cab compared to the Mercedes. Thanks to the better weight distribution, this model can achieve the same performance data with vehicle-wide outriggers as the Mercedes with wide stabilisation.

Like all GSRs, the B240PX on Isuzu offers robust and easy operation. An electro-hydraulic proportional control, a 180° rotating basket, shims, 450° rotation range, and much more are standard.

Optional options include the “automatic levelling” function, rotating beacons, special RAL colors, side walls, saw protection edge, etc. We would be happy to advise you on your individual application.

Vlemmix Model D
Tandem low loader (e.g. suitable for Easylift caterpillar platforms with a working height of 13-18m; or for scissor platforms)

Total weight: 3,500 kg
Payload: approx. 2,750 kg
Total length: 5.80 m
Inner length: 4.00 m
Total width: 2.10 m
Internal width: 1.50 m

Standard equipment:
Welded side wall/frame construction, hot-dip galvanised
V drawbar, hot-dip galvanised
Steel ramp 1335 x 1500 mm, foldable
Floor made of multi-layer glued wood
Lashing rings 10 pcs. in the outer frame
Steel fenders, walkable
Tandem axle aggregate 3500 kg
13 inch tires
Lighting system according to StVZO, mounted on the side
Support wheel fully automatic
Plug for lighting 13 – pin
COC paper

With a working height of 15.60m, a basket load of 200kg and a maximum outreach of 7.5m, the R160 is the right device for a variety of applications.

With a total weight of only 2,100kg, a width of 0.89m and a height of less than 2m, the work platform is also suitable for narrow access routes in the field and for areas of application with low floor loads. The device has a width-adjustable chain chassis and is 4.90 m long and very maneuverable; the basket is removable so the minimum length is only 4.20 m. The outrigger-area is 2.80 x 2.80 m.

We offer suitable transport trailers for this work platform.

With a working height of 17.60m, a maximum horizontal outreach of 8.5m and a basket load of 200kg, the R180 is the ideal device for a variety of uses.

With a total weight of 2,330kg, a minimum passage width of 0.89m and a height of 1.95m, this track mounted work platform is suitable for narrow access routes in the field and for areas of application with low floor loads. The device with fully hydraulic control has a width-adjustable chain chassis and is very maneuverable with a length of 5.48m. The work basket can be rotated 180° and removed, reducing the minimum length to only 4.78m. The outrigger-area is 3.10 x 3.10m.

We offer suitable transport trailers for this work platform.

With a working height of 18.50m, a maximum outreach of 11m and a basket load of 200kg, the R190 is suitable for a variety of uses.

The total weight of the fully hydraulic track-mount is 2,800kg. The construction height is less than 2m and the minimum passage width is 0.89m; the climbing ability is at 30% slope. The work basket can be rotated 180°. The R190 chain platform is particularly suitable for off-road requirements, for narrow access roads and areas with low soil loads.

The device has variable outriggers (narrow or wide) as well as a 230V socket in the basket. A cable remote control for crawler tracks / supports is standard, as well as a connection for air and water lines. A hybrid drive is used as standard, consisting of a 230V mains drive & Honda GX390 petrol engine

Of course, we offer suitable transport trailers for this work platform.

The Easy Lift R210 offers a full 21.20m working height and is therefore suitable for a variety of uses. The chain device with proportional control still has a basket load of 200kg and a maximum of 11.00m latehorizontal outreach (at 120kg).

The width is 0.89 m and the height 1.93 m, which means that the device fits through the vast majority of standard doors and also cuts a fine figure in the field or on narrow access roads. A movable basket arm with 90° and a work basket that can be rotated by 180° make it easier for the operator to reach hard-to-reach destinations.
A hybrid drive consisting of a 230V mains & Honda GX390 petrol engine is used as standard (optional drive with diesel engine).
Also standard are: 230V socket in the basket, operating hours counter, variable stabilisers narrow and wide, remote control.

With the B220TJ, GSR offers a jib device of the latest generation.
The operator has a working height of 22.0 m, a basket load of 250 kg and a maximum horizontal outreach of 13.20 m. The jib can be moved by 130°; In combination with the basket that can be rotated by 180°, even difficult locations can be perfectly controlled.

The device with electrohydraulic control uses H-stabilisers that can be extended at the front and rear. The stabilization can be chosen variably, i.e. narrow, wide or to one side.  Automatic Levelling and the “Home-Function” as well as the “walk-in” basket with easy access are optional.

The B220TJ is aimed at professional landlords, building cleaners, tree cutters, electrical and many more.

The newly developed Easy Lift RA24 can be ordered from 2021. The model will have a double under-boom, which makes the machine a compact, lightweight device (minimum transport dimensions: L 5.20 m, W 0.99 m, H 2.00 m).

The operator has a working height of 23.50 m;  the basket load of 230kg is achieved in the entire work area; the maximum lateral reach is 12,00 m.

The chain-chassis work platform with proportional electrohydraulic control comes with a hybrid drive as standard, consisting of 230V mains &  Kubota diesel engine. A hybrid drive consisting of a lithium battery & diesel engine is optional.  A radio remote control is standard.

The movable jib arm and a rotable basket by 160 ° make it easier for the operator to reach locations that are difficult to access.
Variable outriggers are also available as standard, i.e. a one-sided, narrow or wide stabilisation is possible.

In contrast to the R260, the Easy Lift RA26 has an articulated telescope. The advantage here is the enormous up-and-over height of the machine.

The operator has a full 26m working height at his disposal, with a total weight of 3,800kg.  The maximum outreach is 14.50m and the maximum basket load is 230kg. The minimum passage width is only 0.89m, the passage height is 2.00m.

The crawler work platform with proportional control comes with a hybrid drive as standard, consisting of 230V mains & Kubota diesel engine

A movable basket arm and a basket that can be rotated by 180° make it easier for the operator to reach locations that are difficult to access.
The variable support and a radio remote control for the chain trolley are standard.

 

The Easy Lift R260 brings you to an impressive 26.20m working height. The chain-chassis platform with proportional control offers 230kg basket load and a maximum of 13.50m lateral reach (at 120kg).

The passage width is only 1.40m and the overall height is 2.00m, which means that the device fits through many a door.
A movable basket arm and a rotable basket make it easier for the operator to reach locations that are difficult to access.
The variable stabilisers and a radio remote control for the chain trolley are standard.

A hybrid drive consisting of a 230V mains & diesel engine is used as a standard drive.

Special equipment including:
RAL special color,  automatic levelling,  gray rubber chains,  GRP work basket

 

The Easy Lift R300 is the big brother of the R260 and brings you up to 30m working height. The crawler work platform with proportional control offers 230kg basket load and a maximum of 14.50m outreach (at 120kg).

The passage width is 1.40 m and the construction height is 2.00 m.  A movable jib arm and a basket that can be rotated by 180° make it possible to get to difficult locations.

As standard, the R300 is equipped with a hybrid drive consisting of a 230V mains and a diesel engine.  In addition, variable outriggers as well as a radio remote control for the track chassis.

The Easy Lift RA31 is the big brother of the RA26 and brings you to a working height of 30.20 m.  This machine has an articulated telescope, which enables an enormous overreach height over obstacles.

The crawler work platform with proportional control comes with a hybrid drive as standard, consisting of 230V mains & Kubota diesel engine. With a total weight of 4,200kg, this device offers a maximum outreach of 14.50m and the maximum basket load is 230kg.
The minimum passage width is only 0.89m, the passage height is 2.00m.

A movable basket arm and a work basket that can be rotated by 180° make it easier for the operator to reach locations that are difficult to access.
The variable support and a radio remote control for the chain chassis are standard.

The Easy Lift R360 offers 36m working height and a maximum of 16m lateral reach.This chain platform is primarily made for the maintenance or cleaning of tall buildings where space is limited. With its compact dimensions for this working height, this crawler platform on rubber tracks is suitable for indoor and outdoor use.

The R360 can be stabilised variably and climbs slopes of up to 30%. The track mounted platform can even work up to 5m in the negative working area, i.e. downwards.

The passage width is 1.40 m and the construction height is 2.10 m. A movable basket arm and a basket that can be rotated by 180 ° also enable work in hard-to-reach places, e.g. Building protrusions.
This chain working platform is equipped with a hybrid drive as standard. Mains drive 230V and diesel motor are available. In addition, a radio remote control for the chain chassis is part of the standard equipment.

The Easy Lift R420 with a working height of 41.40m and a basket load of 300kg (in the entire work diagram!) is the current “flagship” of Easylift.

This caterpillar work platform is mainly used for the maintenance or cleaning of tall buildings where space is limited. Maintenance or cleaning of tall buildings in confined spaces are the main purposes. These compact and extremely manoeuvrable platforms offer the greatest benefits, especially in rental, at airports, in shopping centers or other buildings with high atriums and complex architecture; but the R420 chain platform also shows its advantages outdoors and in the field.

The R420 can be stabilised variably and offers a maximum lateral reach of no less than 17,00 m. Gradients of up to 30% are no problem.
The passage width is only 1.42 m and the construction height is 2.20 m. A movable basket arm and a  basket that can be rotated by 180 ° also allow access to hard-to-reach places (e.g. building projections).

This track-mounted platform offers a hybrid drive as standard, consisting of 230V mains and diesel engine. In addition, a radio remote control for the chain chassis is part of the standard equipment.

New stock-machine, built in 2024
available at short notice, subject to prior sale

Working height: approx. 21.50 m
Basket load: 250 kg / 2 people
Rotation range: 450°
Reach sideways: approx. 11.20 m / 120 kg
Total weight: 3,500 kg
Passage width: approx. 2.20 m
Headroom: approx. 2.75 m
Total length: approx. 6.89 m

Electro-hydraulic proportional control
Driven by vehicle hydraulic pump
Aluminum work basket, rotatable 2 x 90°
Basket size: 0.70 x 1.40 x 1.10 m
Hydraulic stabilisers
Vertical outriggers at the front and back
Wooden shims 40 x 40 cm with holder
Driver’s cab – collision protection

 

See product video below
​

Electro-hydraulic control and the robust maintenance-friendly design ensure smooth operation.
With the technical equipment “1.000 V isolation” or “limited lifting function without outriggers”, the E140TJV with basket is suitable for a variety of applications v.a. in the municipal area, as well as for electrical installations or tree care.

Individual customer wishes can be realized.
We are happy to advise you on your application.

Self-propelled articulated telescopic work platform
approx. 2,585 operating hours

Working height: 17.80 m
Basket load: 230 kg / 2 people
Reach sideways: 9.48 m
Own weight: approx. 7,650 kg
Climbing ability: approx. 45%
Passage width: 2.30 m
Headroom: 2.57 m
Total length: 7.68 m

Proportional control
Drive diesel engine Deutz
Articulated telescopic boom steel
Steel work basket
Basket rotates 2 x 90°
Movable basket arm
All wheel drive

Working height: 28.00 m / 120 kg
Working height: 25.00 m / 200 kg
Basket load max.: 200 kg / 2 people
Rotation range: endless
Reach sideways at 25m: 10.50 m / 80 kg
Reach sideways at 28m: 12.00 m / 80 kg
Own weight: approx. 2,600 kg
Passage width: 1.37 m
Minimum passage width: 0.87 m
Headroom: 1.97 m
Total length: 7.31 m
Minimum total length: 6.22 m / without basket

Proportional control
Battery drive
Aluminum work basket, removable
Basket size: 0.70 x 1.20 x 1.10 m
230 V socket in the work basket
Hydraulic support
Spacer plates 40 x 40 x 2.7 cm with holder
Track width variable
Hydraulic travel drive up to 10% gradient

Self-propelled articulated telescopic work platform
approx. 3,580 operating hours

Working height: 17.80 m
Basket load: 230 kg / 2 people
Reach sideways: 9.48 m
Own weight: approx. 7,650 kg
Climbing ability: approx. 45%
Passage width: 2.30 m
Headroom: 2.57 m
Total length: 7.68 m

Proportional control
Drive diesel engine Deutz
Articulated telescopic boom steel
Steel work basket
Basket rotates 2 x 90°
Movable basket arm
All wheel drive

Working height: 30.00 m
Basket load: 200 kg / 2 people
Rotation range: Endless
Reach sideways / 28 m: 11.60 m / 80 kg
Reach sideways / 30 m: 11.00 m / 80 kg
Own weight: approx. 3500 kg
Passage width: 1.72 m
Headroom: 2.13 m
Total length: 8.90 m

Proportional control
Energy supply via internal flat cable
Drive battery 8 x 6 V / 190 Ah, charger fully automatic
Telescopic aluminum boom, seamless
Profile guide nylon stainless steel
Load moment limitation, two load ranges
Angle arm 600 mm
Aluminum work basket, rotatable 2 x 45°, size: 0.70 x 1.20 x 1.10 m
230 V socket in the work basket
Hydraulic quick support with support pressure monitoring
Hydraulic travel drive up to 15% gradient
Operation of the travel drive and support in the work basket

The novelty in 2020: the Europelift TM15TJ

The new EuropeLift TM15TJ fulfills the wishes and needs of many customers for a 15m telescopic device with a movable jib arm.
The main features of this very compact 15m telescopic work platform are the high stability, horizontal outreach and the 85° movable jib arm, which makes it particularly easy to maneuver at height.

The device has a working height of 14.8m, horizontal outreach of max. 10.0m (100kg), and max. 220kg basket load. A hydraulic self-drive is part of the standard equipment,

Different drive variants are available:
230V mains  (total weight approx.1,690 kg)
Mains 230V & Honda GX200  (total weight approx.1,800 kg)
Battery drive 24V  (total weight approx.1,860 kg)

Compact dimensions and high maneuverability are the advantages of the telescopic mast work platforms. The concept of the Haulotte Star 10 has proven itself; Especially in indoor applications with small footprint and narrow passage passages it has advantages through its compactness.

With the articulated arm lateral reach up to 3 m is possible and the devices can be moved even when fully extended.
Practical tool trays, operating hours counter, abrasion-free tires and fully automatic chargers complete the standard equipment.

Warehouse new device built in 2023.
available at short notice, subject to prior sale

Working height: 10.00 m
Basket load: 450 kg / max. 2 people
Platform size: 2.26m x 1.15m
Platform displacement: 0.90 m
Own weight: 2,700 kg
Turning radius: 2.30 m (outside)
Gradeability: 25%
Passage width: 1.18 m
Height: 2.39m
Transport height: 1.68 m
Total length: 2.49 m
Ground clearance: 0.10 m

Battery drive 24 V / 225 Ah, fully automatic charger
Electric 2-wheel drive, 0.8 km/h up to max.: 4.00 km/h
Load capacity on platform displacement: 113 kg
Inclinometer Longitudinal/Transverse: 3° / 1.5°
Solid rubber tires, non-marking, grey
Moveable at full height
For outdoor and indoor use

Arbeitshöhe: 17,10 m
Korblast: 400 kg / 2 Personen
Plattformgröße: 2,90 x 1,19 m
Plattformverschub: 1,00 m
Eigengewicht: 4.670 kg
Wenderadius: 2,82 m / außen
Steigfähigkeit: 25 %
Bodenfreiheit: 0,15 m
Durchfahrtbreite: 1,22 m
Durchfahrthöhe minimal: 2,36 m
Gesamtlänge: 3,00 m

Proportionalsteuerung
Batterien 8 x 6 V / 200 Ah, Ladegerät vollautomatisch
Plattformerweiterung ausschiebbar
Aufsetzschutz für Plattform
Betriebsstundenzähler
Schlagloch-Schutzsystem
Geländer klappbar
Bedienpult abnehmbar
Fahrantrieb 2-Rad, proportional, max.: 2,40 km/h
Kraftgang zuschaltbar
Differentialsperre
Bereifung Vollgummi weiß
Einsatz für Innenbereiche

With the new HT16RTJ Pro, Haulotte is expanding the range of diesel telescopic self-propelled machines downwards. The 16m telescopic boom lift offers 16.1 m working height, max. 13 m horizontal outreach, as well as max. 350 kg basket load.

Four-wheel drive and four-wheel steering with pendulum axle as standard for best off-road mobility. With the multi-movement function, 360 ° endless rotation and the 1.80m articulated jib-arm, even difficult-to-reach targets can be accessed with pinpoint accuracy.

Further standard equipment includes the on-board diagnostic tool, a differential with operator-controlled lock, a universal telematics connection, large rough terrain tires and a rotating beacon. The Haulotte HT16RTJ Pro is powered by a level 5 Kubota diesel engine, which does not require a particle filter.

 

Working height: 30.00 m
Basket load: 200 kg / 2 people
Rotation range: endless
Lateral reach / 28 m: 11.60 m / 80 kg
Lateral reach / 30 m: 11.00 m / 80 kg
Net weight: approx. 3,500 kg
Passage width: 1.72 m
Headroom: 2.13 m
Total length: 8.90 m

proportional control
Drive battery 8 x 6 V / 180 Ah
Drive diesel engine
hour meter
Aluminum work basket, rotatable 2 x 45°
Basket size: 0.70 x 1.20 x 1.10 m
230 V socket in the work basket
Tool trays in the work basket
hydraulic stabilisers
Shims 40 x 40 x 2.7 cm with holder
Hydraulic travel drive up to 15% incline
Operation of travel drive and outriggers in the work basket

 

The DENKA•LIFT DL 30 is the world’s highest trailer work platform with a working height of 30m and a total weight of 3,500kg. Hybrid drive, compact dimensions with a width of 1.72 m and a minimum headroom of less than 2.00 m

You can see how a DENKA•LIFT DL30 works in the attached video

Due to its excellent maneuverability and compact dimensions, the Haulotte Optimum8 can be used for be used optimally in industry, craft, or rental. The device offers proportional and fast movements and is approved for indoor and outdoor use. Standard doors are no obstacle.

Maximum safety is achieved by tilting and tilting (Pot Hole). The tires are non-marking and can also be used on sensitive soils.
The compact electric scissor lifts are extremely robust and require minimal maintenance.

With the PB ECo S80-8EL, a working height of 7.90 m is possible – both indoors and outdoors. With the sensitive proportional control (drive, lift, lower), the stage can be comfortably moved and maneuver the platform vertically upwards. The platform of the platform has a size of 2.26 mx 0.81 m and is equipped with a capacity of 380 kg. An additional displacement of 0.90 m increases the platform, which allows 2 people in the indoor and 1 person outdoor use including material and tools fit.

With a length of 2.47 m, a width of 0.81 m and a total height of 2.25 m, the scissor lift is very compact. With the easy-to-fold railing, the height can be reduced again to a compact 1.90 m. Due to its low dead weight of 2,150 kg, its 90 ° steering and the small turning radius, the PB ECo S80-8EL can be moved quickly and manoeuvrable – and without problems in full height.

ID number 1809
Type Self-Propelled Telescope
Year of construction 1996
Working height 28.00 m
Power supply Batterie
Max. basket load 200 kg
Horizontal outreach 12.00 m
Slew movement endlos
Weight 2500 kg
Transport height 2.10 m
Width 1.37 m
Length 7.30 m

 

The scissor lift S151-16E of the TOP16 series is ideal for working in medium high situations. With a length of 3.18 m, a width of 1.60 m and a height of 3.00 m, the S151-16E is also comparatively compact.
The platform carries loads of up to 550 kg, and by means of manual platform displacement, the platform can be set to max. Expand 4.08 mx 1.58 m. Enough space and power for up to 2 people, material and tools – both indoors and outdoors.

The model weighs a slim 4,740 kg and is therefore predestined for work that requires a low floor load. Folding railings also ensure a stage height of only 2.12 m, which makes it easier for the user to handle during transport and at low clearance heights.
A standard differential lock rounds off the profile of the PB S151-16E.

The scissor lift S151-16E of the TOP16 series is ideal for working in medium high situations. With a length of 3.18 m, a width of 1.60 m and a height of 3.00 m, the S151-16E is also comparatively compact.
The platform carries loads of up to 550 kg, and by manual platform displacement, it can be set to max. Expand 4.08 mx 1.58 m. Enough space and power for up to 2 workers, materials and tools – both indoors and outdoors.

The model weighs a slim 4,740 kg and is therefore predestined for work that requires a low floor load. Folding railings also ensure a stage height of only 2.12 m, which makes it easier for the user to handle during transport and at low clearance heights.
A standard differential lock rounds off the profile of the PB S151-16E.

The scissor lift S171-16E of the TOP16 series is ideal for working in medium-high situations. With a length of 3.18 m, a width of 1.60 m and a height of 3.22 m, the S171-16E is also comparatively compact.
The platform carries loads of up to 400 kg, and by manual platform displacement, it can be set to max. Expand 4.08 mx 1.58 m. Enough space and power for up to 2 workers, materials and tools – both indoors and outdoors.

The model weighs a slim 5,120 kg and is thus predestined for work that requires a low floor load. Folding railings also ensure a stage height of only 2.34 m, which makes it easier for the user to handle transport and low clearance heights.
A standard differential lock rounds off the profile of the PB S171-16E.

The scissor lift PB S171-16ES with a working height of 17.10 m differs from the S171-16E by the support system, which offers up to 200 mm level compensation. With just the push of a button, the scissor lift levels automatically within a few seconds. This allows an exactly vertical or parallel stroke to the object with optimum stability. Of course, the S171-16ES can also be used without supports and is (like all PB work platforms) movable in full height.

The model weighs a slim 5,840 kg and is therefore predestined for work that requires a low floor load. Folding railings also ensure a stage height of only 2.34 m, which makes it easier for the user to handle transport and low clearance heights.
The standard differential lock rounds off the profile of the PB S171-16ES.

The scissor lift S275-14ES 4×4 offers a working height of 27.50 m and is perfect for working in higher altitudes. Its construction length is 6.60 m with a width of just 1.40 m and a height of 4.22 m. The mega-deck platform manages a space of 6.15 mx 1.20 m, but can be extended within seconds by platform displacement to 7.65 mx 1.20 m. In combination with 750 kg lifting capacity and a registration of up to 4 people, this creates a more than decent package “for the height”.

Despite its impressive dimensions, the machine can be maneuvered precisely and flexibly in any position thanks to stepless proportional control (drive, lift, lower) and 2-axle steering. An exhaust-free electro-hydraulic motor and a 4-wheel drive drives the stage persistently and powerfully in interior applications. Even when completely extended, the PB S320-14ES can be moved easily.
Alternatively, the scissor lift is also available as PB S320-14E without support system.

The scissor lift S320-14ES 4×4 offers a working height of 31.87 m and a load capacity of 750kg, making it perfect for working in higher altitudes. Its construction length is 6.60 m with a width of just 1.40 m and a height of 4.22 m.
Already in the standard version, the Mega-Deck platform offers a space of 6.15 mx 1.20 m, but within seconds it can be lowered to max. Extend 7.65 m x 1.20 m. In combination with 750 kg lifting capacity and a registration of up to 4 people, this creates a more than decent package “for the height”.

Despite its impressive dimensions, the machine can be maneuvered precisely and flexibly in any position thanks to stepless proportional control (drive, lift, lower) and 2-axle steering. An exhaust-free electro-hydraulic motor and a 4-wheel drive drives the stage persistently and powerfully in interior applications. Even when completely extended, the PB S320-14ES can be moved easily.

The scissor lift PB S151-12E with a working height of 15.00 m offers a lifting capacity of an impressive 550 kg – both indoors and out. Like all PB scissor lifts the PB S151-12E can be moved in full height.

With its proportional control, the 90 ° steering angle, and the small turning radius of only 2.83 m, the S151-12E is extremely flexible and suitable for a wide range of different jobs. In addition, with the powerful front-wheel drive of the machine (2200 NM gear torque) and the standard differential lock and 25% slope are no problem.

The scissor lift PB S151-12ES differs from the S151-12E by the support, which offers up to 200mm level compensation. With just the push of a button, the machine levels automatically within a few seconds. This allows an exactly vertical or parallel stroke to the object with optimum stability. The ES series can also be operated without supports and is thus (like all PB models) movable in full height.

The standard differential lock completes the profile of the PB S151-12ES.

The scissor lift S171-12E of the PB TOP12 series, which is approved for indoor use, offers a working height of 17.10 m and a load capacity of 400 kg thanks to its compact design. With a push, the work platform can be set to max. Extend 3.90 m x 1.19 m. This platform shift not only provides more work space for up to 2 workers, tools and material, but also allows easy bridging of obstacles.

With its sensitive proportional control in combination with the existing 90 ° steering and a low turning radius of just 2.83 m, the PB S171-12E is extremely flexible and suitable for a wide range of different tasks.
A standard differential lock and the movability of the stage in full height, complete the profile of the scissors successfully.

The scissor lift PB S171-12ES with a working height of 17.10 m differs from the S171-12E by the support system which offers up to 200 mm level compensation. With just the push of a button, the machine levels automatically within a few seconds. This allows an exactly vertical or parallel stroke to the object with optimum stability. However, the ES series can also be used without a support, ie like a “normal” scissor lift and can therefore be moved in full (like all PB models).

The standard differential lock rounds off the profile of the PB S171-12ES.

The scissor lift S195-12E offers a working height of 19.60 m and a lifting capacity of 600 kg. With its sensitive proportional control (drive, lift, lower) in combination with the existing 90 ° steering and a low turning radius of just 3.89 m, the PB S195-12E is extremely flexible and suitable for a wide range of different jobs.

PB’s unique dual scissor system provides a secure feel even when the platform is fully extended and still weighs only 8,820 kg (16,000 pounds). This allows in conjunction with the retractable railing a minimum of effort during transport.
A standard differential lock and the movability of the stage in full height, complete the profile of the scissors successfully.

The scissor lift PB S195-12ES with a working height of 19.60 m differs from the S195-12E by the patented support system, which offers up to 200 mm level compensation. With just the push of a button, the machine levels automatically within a few seconds. This enables an exactly vertical or parallel stroke to the object with optimum stability. The ES series can also be used as a “normal” scissor lift – without support – and is (like all PB models) movable in full height.

The standard differential lock completes the profile of the PB S195-12ES.

The indoor platform approved S225-12E scissor lift of the PB TOP12 series has a working height of 22.50 m and a payload of 450kg.
The platform can be adjusted to a max. Expand to 5.48 m x 1.19 m. This shuffle not only creates more work space for up to 2 workers, tools and material, but also allows easy bridging of obstacles.

The low self-weight of the PB S225-12E of 9,750 kg and the possibility to reach a height of only 2.91 m by folding in the railings also facilitate easy transport of the platform. A standard differential lock and the movability of the stage in full height, complete the profile of the scissors successfully.

The scissor lift S225-12ES of the PB TOP12 series is unique on the market with its technical features. At a working height of 22.50 m and a width of only 1.22 m, this PB scissors not only have an indoor certification but also an outdoor approval and can therefore be used astonishingly flexibly.
This is made possible by the patented support system, which gives the user an additional plus in stability while working. The PB scissor lift equals the height of a common curb, for example, with a self-leveling support stroke of 380 mm at the push of a button. in tight inner-city deployments quite simply.

The S275-18ES 4×4 belongs to the category of narrow and high scissor lifts.
With a working height of only 27.50 m and a width of just 1.80 m, it is perfectly suited for working in high altitudes where space is limited. With 750 kg load capacity on the max. 8.40 m x 1.80 m platform is a frequent lifting of the past, because in addition to up to 4 people even heavy material and tools can be easily lifted up.

For strong and durable propulsion, the electro-hydraulic drive and the standard differential lock are responsible. A 25% climbing ability completes the overall package of driving characteristics outstanding. Incidentally, the scissor lift can also be fully operated in your indoor or outdoor use.
In the stand, the fully automatic support system ensures within seconds that work on high exterior facades directly on the object can be realized easily and safely, even on uneven ground conditions. Alternatively, the scissor lift is also available as PB S275-18E without support system.

The S320-18ES 4×4 belongs to the category of narrow and extremely high scissor lifts. With a working height of 32.14m and a width of “only” 1.80m, it is ideally suited for working in high altitudes where space is limited.
With 750 kg load capacity on the max. 8.40 m x 1.80 m platform is a frequent lifting of the past, because in addition to up to 4 people even heavy material and tools can be easily lifted up.

For strong and durable propulsion, the electro-hydraulic drive and the standard differential lock are responsible. A 25% climbing ability completes the overall package of driving characteristics outstanding. Incidentally, the scissor lift can also be fully operated in your indoor or outdoor use.

Aufgrund der hervorragenden Wendigkeit und der kompakten Abmaße kann die Haulotte Compact 8W z.B. in Industrie, Handwerk, oder der Vermietung optimal eingesetzt werden.  Der Unterschied zur Compact 8 ist die um 40cm breitere Plattform (bei der Compact8 0,80m und bei der Compact 8W 1,20m)

Mit dem Plattform-Ausschub wird die Arbeitsfläche in der Plattform um 0,92m verlängert. Die Maschine ist in voller Höhe verfahrbar und hat graue, nicht-markierende Räder und kann auch auf empfindlichen Böden im Innen- sowie im Außenbereich eingesetzt werden.