Working height: 15.30 m
Basket load capacity: 220 kg / 2 persons
Rotation range: 355°
Lateral outreach: 7.50 m / 220 kg
Net weight: approx. 2,120 kg
Min. passage width: 0.78 m
Min. passage height: 1.99 m
Total length: approx. 5.15 m
Min. total length: approx. 4.50 m

Proportional controls
Internal energy supply routing
Power source: 230 V mains
Power source: Honda GX390 petrol engine
Articulated telescopic boom (steel)
Movable basket arm (85°)
Aluminum work basket, rotatable 2 x 70°; Dimensions: 0.80 x 1.20 x 1.10 m; detachable
230 V power outlet in work basket
Tool tray in work basket
Hour meter
Hydraulic quick-setup outriggers with outrigger pressure monitoring
Mechanical chassis adjustment
Automatic outrigger leveling
Technically refurbished; DGUV inspection updated

Working height: 7.80 m
Basket load capacity: 230 kg
Platform dimensions: 1.68 m x 0.70 m
Platform extension: 0.91 m
Curb weight: 1,370 kg
Turning radius: 1.70 m (outside)
Gradeability: 25%
Overall width: 0.70 m
Overall height: 2.00 m
Overall length: 1.90 m
Ground clearance: 0.08 m

24 V battery drive; fully automatic charger
Drive system: 2-wheel; max. speed: 4.55 km/h
Hour meter
Tilt sensor (2°)
Battery charge indicator
Tires: Solid rubber, non-marking gray, 317 mm diameter
Suitable for indoor use
Technically refurbished
DGUV inspection updated

Working height: 13.00 m
Basket load: 220 kg / 2 persons
Rotation range: 360°
Lateral reach: 9.00 m / 100 kg
Weight: approx. 1,500 kg
Clearance width: 1.58 m
Clearance height: 1.99 m
Overall length: 5.95 m
Outrigger width: 3.72 m

Electro-hydraulic proportional control
Internal power supply
230 V mains power
Steel telescopic boom
Aluminum work basket, rotatable 2 x 45°, dimensions: approx. 0.70 x 1.30 x 1.10 m
Tool storage in work basket
Operating hours counter
230 V socket in work basket
Hydraulic quick-release outriggers with outrigger pressure monitoring
Hydraulic maneuvering drive
40 x 40 x 2.7 cm outrigger pads with brackets

Working height: 5.80 m
Platform capacity: 230 kg / 1 person
Machine weight: approx. 860 kg
Width: approx. 0.79 m
Height (stowed): approx. 1.80 m
Length: approx. 1.40 m

Drive: Battery
Hour meter
Vertical telescopic mast
Tool tray on chassis
2-wheel drive, max. speed 5.0 km/h
Non-marking solid tyres, 250 x 50

The Haulotte Star 6 is a safe and efficient alternative to ladders, allowing access to hard-to-reach areas at height.
A non-slip entry step ensures safe access to the platform. The robust platform can be raised or lowered to its full working height of 3,800 mm even at maximum travel speed of 4.5 km/h, allowing the operator to position the platform precisely while driving.

Working height: 14.80 m
Basket load: 220 kg / 2 persons
Rotation range: 365°
Lateral reach: approx. 10.00 m / 100 kg
Weight: approx. 1,860 kg
Clearance width: 1.60 m
Clearance height: 1.99 m
Overall length: 6.25 m

Proportional control
Internal power supply
230 V mains power
Steel telescopic boom
Basket arm movable at 85°
Aluminum work basket, rotatable 2 x 45°, dimensions: approx. 0.70 x 1.30 x 1.10 m
230 V socket in work basket
Tool storage in work basket
Operating hours counter
Hydraulic quick-release outriggers with outrigger pressure monitoring
Hydraulic maneuvering drive
40 x 40 x 2.7 cm outrigger pads Bracket

Working height: approx. 18.10 m
Basket load: 280 kg / 3 persons
Rotation range: 360°
Lateral reach: approx. 10.80 m / 280 kg
Total weight: 7490 kg
Clearance width: approx. 2.55 m
Clearance height: approx. 3.50 m
Total length: approx. 7.73 m

Internal energy supply
Fully hydraulic proportional control
Drive via vehicle hydraulic pump
Start-stop diesel engine in work basket
Steel telescopic boom
Cleaning brushes at the telescopic ends
Basket arm movable 135°
Aluminum work basket, rotatable 70 x 85°, dimensions: 0.75 x 1.60 x 1.10 m
Cab collision protection
Hydraulic quick-release outriggers, vehicle width
Vertical outriggers
230V Power outlet in the basket
1 large aluminum storage box
2 storage boxes on the loading platform

Working height: 16.00 m
Basket load: 200 kg / 2 persons
Swivel range: 355°
Lateral reach: approx. 10.00 m / 80 kg
Weight: 1,820 kg
Clearance width: 1.64 m
Clearance height: 2.02 m
Overall length: 6.90 m

Proportional control
Internal power supply
230 V mains power
Battery powered
Steel telescopic boom
Basket arm movable at 85°
Aluminum work basket, rotatable 2 x 45°, dimensions: 0.80 x 1.20 x 1.10 m
230 V socket in work basket
Tool storage in work basket
Operating hours counter
Hydraulic quick-release outriggers with outrigger pressure monitoring
Hydraulic maneuvering drive
40 x 40 mm outrigger pads x 2.7 cm with bracket

New stock machine, built in 2026
subject to prior sale

Working height: 18.00 m
Basket load: 200 kg / 2 people
Rotation range: endless
Lateral reach: 11.30 m / 80 kg
Weight: approx. 1,975 kg
Clearance width: 2.06 m
Minimum clearance width: 1.84 m
Clearance height: 2.14 m
Minimum clearance height: 2.00 m
Total length: 7.82 m
Minimum length: 6.60 m

Proportional control
Battery drive: 4 x 6 V / 195 Ah/5h, fully automatic charger
Jib arm: 600 mm
Work basket: aluminum, rotatable 2 x 45°
Basket dimensions: 0.70 x 1.20 x 1.10 m
230 V socket in the work basket
Tool storage in the work basket
Operating hour meter
Hydraulic stabilizers
Base plates 40 x 40 x 2.7 cm with bracket
Hydraulic maneuvering drive for up to 15% gradient

See product video below

These are sample images.
Actual images will follow shortly.

Working height: 18.00 m
Basket load: 200 kg / 2 persons
Rotation range: continuous
Lateral reach: 11.30 m / 80 kg
Weight: approx. 2000 kg
Passage width: 2.06 m
Minimum passage width: 1.84 m
Passage height: 2.14 m
Minimum passage height: 2.00 m
Overall length: 7.82 m
Minimum overall length: 6.60 m

Proportional control
Power supply via internal flat cable
Drive: 4 x 6 V / 180 Ah batteries, fully automatic charger
Telescopic boom: aluminum, seamless
Profile guide: nylon stainless steel
Load moment limiter
Angle arm: 600 mm
Work basket: aluminum, rotatable 2 x 45°, dimensions: 0.70 x 1.20 x 1.10 m
Double 230 V socket Work basket
Tool trays in the work basket
Hydraulic quick-release outriggers with outrigger pressure monitoring
40 x 40 x 2.7 cm leveling plates with brackets
Hydraulic maneuvering drive for inclines up to 15%
Technically refurbished, TÜV and DGUV inspections updated

Working height: 18.00 m
Basket load: 200 kg / 2 persons
Rotation range: continuous
Lateral reach: 10.80 m / 80 kg
Weight: approx. 2175 kg
Passage width: 2.06 m
Minimum passage width: 1.84 m
Passage height: 2.10 m
Minimum passage height: 2.00 m
Overall length: 7.35 m

Proportional control
Power supply via internal flat cable
Drive: 4 x 6 V / 190 Ah batteries, fully automatic charger
Telescopic boom: seamless aluminum
Profile guide: nylon stainless steel
Load moment limiter
Angle arm: 800 mm
Work basket: aluminum, rotatable 2 x 45°, dimensions: 0.70 x 1.20 x 1.10 m
230 V socket in work basket
Hydraulic quick-release outriggers Support pressure monitoring
Support plates 40 x 40 x 2.7 cm with bracket
Hydraulic drive up to 15% gradient

Working height: 10.00 m
Basket load: 200 kg
Lateral reach: 3.00 m / 200 kg
Rotation range: 345°
Weight: approx. 2760 kg
Turning radius: 1.88 m (outside)
Gradient capability: 23%
Passage width: 1.00 m
Passage height: 1.99 m
Overall length: 2.62 m

Power supply: 24 V battery, fully automatic charger
Inclination gauge: 3°
Vertical telescopic mast
Basket arm: 130°
Work basket: steel, size: 0.90 m x 0.70 m
Drive: 2-wheel
Tires: solid rubber, gray, 16 x 5 x 10.5
New batteries
Technically refurbished
DGUV inspection updated

Like new, stock machine, built in 2022

Push-around scissor lift, for manual relocation

Working height: 3.80 m
Basket load: 240 kg / 1 person
Platform size: 1.04 m x 0.57 m
Own weight: approx. 270 kg
Turning radius: 1.20 m (outside)
Clearance width: 0.70 m
Clearance height: 1.72 m
Total length: 1.20 m
Ground clearance: 0.05 m

Yellow paint finish
12 V battery drive, fully automatic charger
Hour meter
1.5° inclinometer
Battery level indicator
Solid rubber tires, gray, diameter 150 / 225 mm
Swinging door
Indoor approval

Small machine, powerful performance
Super compact design: fits through standard doors, elevators, etc.
Narrow Turning radius for tight spaces
Lightweight for working on sensitive floors or in multi-story projects
Small size, high agility
Small platform for working in tight spaces
Transport heavy tools and materials simultaneously: Platform capacity up to 240 kg
Low maintenance, easy to operate
No setup time, simply push the machine to wherever you want to use it
Maintenance-free battery

Working height: 10.10 m
Basket load: 200 kg
Lateral reach: approx. 3.10 m
Weight: approx. 3300 kg
Outer turning radius: 2.60 m
Inner turning radius: 0.75 m
Gradient capability: 30%
Passage width: 0.99 m
Passage height: 1.99 m
Overall length: 2.89 m
Swivel range: 360°

Power supply: 24 V battery with integrated charger
Vertical telescopic mast
Movable basket arm
Steel work basket, size: 0.70 m x 0.90 m
Traffic drive: 2-wheel
Tires: Solid rubber, gray
Tire alarm: 2°

Working height: 11.20 m
Basket load: 200 kg / 2 persons
Rotation range: 380°
Lateral reach: 5.10 m / 250 kg
Weight: approx. 2600 kg
Turning circle: 2.60 m / outside
Gradient capability: approx. 20%
Clearance width: 1.55 m
Clearance height: 1.97 m
Overall length: 4.06 m

Proportional control
Battery-powered drive, fully automatic charger
Articulated steel boom
Movable basket arm, 130°
Rotating work basket, manually operated with crank
Work basket, steel, dimensions: 0.60 x 1.25 x 1.10 m
Drive: 2-wheel proportional, max.: 4.00 km/h
Tires: Solid rubber

Working height: 8.20 m
Basket load: 350 kg
Platform size: 2.30 m x 0.80 m
Platform travel: 0.92 m
Empty weight: approx. 1,730 kg
Turning radius: 2.10 m (outside)
Gradient capability: 25%
Passage width: 0.82 m
Passage height: 2.00 m
Overall length: 2.48 m
Ground clearance: 0.13 m

24 V battery drive, fully automatic charger
2-wheel drive, max.: 3.50 km/h
Operating hours counter
Inclination gauge (2°)
Battery charge indicator
Solid rubber tires, gray, 38 x 13 x 5 cm

Arbeitshöhe: 5,60 m
Korblast: 230 kg / 2 Personen
Plattformgröße: 1,35 m x 0,69 m
Plattformverschub: 0,60 m
Eigengewicht: ca. 906 kg
Wenderadius: 1,25 (außen)
Steigfähigkeit: 25 %
Durchfahrtbreite: 0,76 m
Höhe: 2,06 m
Transporthöhe: 1,82 m
Gesamtlänge: 1,53 m
Bodenfreiheit: 0,048 m

Batterieantrieb 12 V / 115 AH, Ladegerät vollautomatisch
Fahrantrieb elektrisch 2-Rad, 0,50 km/h bis max.: 3,30 km/h
Tragfähigkeit auf Plattformverschub: 120 kg
Neigungsmesser Längs-/Querachse 3° / 1,5 °
Bereifung Vollgummi, nicht-markierend, grau
in voller Höhe verfahrbar
für Inneneinsatz

Working height: approx. 21.00 m
Basket load: 215 kg / 2 persons
Rotation range: continuous
Lateral reach: approx. 11.70 m / 80 kg
Weight: approx. 2440 kg
Clearance width: approx. 1.92 m
Clearance height: approx. 2.18 m
Overall length: approx. 7.55 m

Proportional control
Internal power supply
230 V mains power
Diesel direct drive
Articulated telescopic boom, steel
Load moment limiter
Aluminum work basket, rotatable 2 x 45°, dimensions: 0.70 x 1.30 x 1.10 m
230 V socket in work basket
Hydraulic quick-release outriggers
Hydraulic maneuvering drive

Working height: 25.00 m
Basket load: 200 kg / 2 persons
Rotation range: continuous
Lateral reach: 11.40 m / 80 kg
Empty weight: approx. 2,530 kg
Clearance width: 1.62 m
Clearance height: 2.10 m
Overall length: 9.18 m
Minimum overall length: 8.30 m

Proportional control
Power supply via internal flat cable
Drive: 4 x 6 V / 190 Ah batteries, fully automatic charger
Seamless aluminum telescopic boom
Stainless steel nylon guide rails
Load moment limiter
600 mm articulated arm
Aluminum work basket, rotatable 2 x 45°, dimensions: 0.70 x 1.20 x 1.10 m
230 V socket in work basket
Operating hours counter
Tool storage in work basket
Hydraulic quick-release outriggers With support pressure monitoring
Support plates 40 x 40 x 2.7 cm with bracket
Hydraulic maneuvering drive up to 15% incline

Working height: 25.00 m
Basket load: 200 kg / 2 persons
Rotation range: continuous
Lateral reach: 12.00 m / 80 kg
Empty weight: 3300 kg
Clearance width: 1.72 m
Clearance height: 2.13 m
Overall length: 8.05 m

Proportional control
Power supply via internal flat cable
Drive: 8 x 6 V / 180 Ah batteries, fully automatic charger
Seamless aluminum telescopic boom
Stainless steel nylon guide rails
Load moment limiter
800 mm angle arm
Aluminum work basket, rotatable 2 x 45°, dimensions: 0.70 x 1.40 x 1.10 m
Dual 230 V socket in the work basket
Tool storage in the work basket
Digital operating hours counter
Hydraulic quick-release outriggers with outrigger pressure monitoring
40 x outrigger pads 40 x 2.7 cm with bracket
Hydraulic maneuvering drive up to 15% incline

Working height: 5.60 m
Platform capacity: 230 kg / 2 persons
Platform size: 1.35 m x 0.69 m
Platform extension: 0.60 m
Weight: approx. 906 kg
Turning radius (outside): 1.25 m
Gradeability: 25 %
Overall width: 0.76 m
Height: 2.06 m
Transport height: 1.82 m
Overall length: 1.53 m
Ground clearance: 0.048 m

Drive and performance:
– Battery drive 12 V / 115 Ah, fully automatic charger
– Electric 2-wheel drive, 0.50 to max. 3.30 km/h
– Load capacity on platform extension: 120 kg
– Tilt sensor (longitudinal / lateral): 3° / 1.5°
– Solid, non-marking grey tyres
– Drivable at full height
– Designed for indoor use

Working height: 15.00 m
Basket load: 230 kg / 2 persons
Rotation range: 360°
Lateral reach: approx. 8.50 m / 230 kg
Empty weight: approx. 7,300 kg
Turning radius: 3.70 m / outside
Gradient capability: 25%
Ground clearance: 0.15 m
Passage width: 1.50 m
Passage height: 2.10 m
Overall length: 6.60 m

Proportional control
Inclination gauge 3°
Power supply: 48 V 360 Ah battery
Battery charge indicator
Articulated telescopic boom, steel
Work basket, steel, rotatable 2 x 90°, dimensions: 0.80 x 1.20 x 1.10 m
Overload protection
Drive: 2-wheel proportional, max.: 5.0 km/h
Tires 21.10×12, solid rubber, non-marking

Working height: 11.70 m
Basket load: 230 kg / 2 persons
Rotation range: 355°
Lateral reach: 7.22 m / 230 kg
Weight: 7,040 kg
Turning radius: 3.60 m / outside
Gradient capability: 25%
Ground clearance: 0.11 m
Passage width: 1.20 m
Passage height: 1.99 m
Overall length: 5.64 m
Transport length: 4.20 m

Paint color: yellow
Inclination indicator: 3°
Power supply: 48 V 320 Ah battery
Basket arm: 140° swivel range
Basket arm: 180° horizontal swivel range
Work basket: steel, rotatable 2 x 90°
Basket dimensions: 0.80 x 1.15 x 1.10 m
Drive: 2-wheel proportional, max. 6.0 km/h
Tires 600×190, non-marking
No overhang, small turning radius
Approved for indoor and outdoor use

Working height: approx. 13.50 m
Basket load: 215 kg / 2 persons
Lateral reach: approx. 6.10 m
Platform size: approx. 0.69 x 1.11 m
Weight: approx. 3880 kg
Turning radius: approx. 0.40 m / inside
Gradient capability: approx. 36%
Passage width: approx. 1.50 m
Passage height: approx. 2.00 m
Overall length: approx. 4.04 m

Proportional control
48 V battery drive, fully automatic charger
Battery charge indicator
Tipping alarm
Operating hours counter
2-wheel proportional drive, max.: 4.00 km/h
Rotating work basket

Working height: approx. 14.10 m
Max. lifting capacity: 230 kg / 2 persons
Lateral reach: approx. 6.25 m
Swivel range: 360°
Weight: approx. 5,250 kg
Overall length: approx. 5.36 m
Overall width: approx. 1.75 m
Height: approx. 2.00 m

Articulated telescopic boom, steel
Rotating work platform, steel, approx. 0.66 x 1.22 m
48 V battery drive
Ground clearance: approx. 0.15 m
Turning radius (outer): approx. 4.17 m

Working height: 25.00 m
Basket load: 200 kg / 2 persons
Rotation range: continuous
Lateral reach: 11.40 m / 80 kg
Empty weight: approx. 2,450 kg
Clearance width: 1.62 m
Clearance height: 2.10 m
Overall length: 9.18 m
Minimum overall length: 8.30 m

Proportional control
Power supply via internal flat cable
Drive: 4 x 6 V / 190 Ah batteries, fully automatic charger
Seamless aluminum telescopic boom
Stainless steel nylon guide rails
Load moment limiter
600 mm articulated arm
Aluminum work basket, rotatable 2 x 45°
Basket size: 0.70 x 1.20 x 1.10 m
230 V socket in work basket
Operating hours counter
Hydraulic quick-release outriggers Support pressure monitoring
Shield plates 40 x 40 x 2.7 cm with bracket
Hydraulic maneuvering drive up to 15% incline

Working height: 25.00 m
Basket load: 200 kg / 2 persons
Rotation range: continuous
Lateral reach: 11.40 m / 80 kg
Weight: approx. 2,450 kg
Clearance width: 1.62 m
Clearance height: 2.10 m
Overall length: 9.18 m
Minimum overall length: 8.70 m

Proportional control
Power supply via internal flat cable
Drive: 4 x 6 V / 195 Ah/5h battery, fully automatic charger
Seamless aluminum telescopic boom
Stainless steel nylon guide rails
Load moment limiter, 600 mm angle arm
Aluminum work basket, rotatable 2 x 45°, dimensions: 0.70 x 1.20 x 1.10 m
230 V socket in work basket
Operating hours counter
Tool storage in work basket
Quick-release outriggers Hydraulic with support pressure monitoring
40 x 40 x 2.7 cm leveling plates with brackets
Hydraulic maneuvering drive up to 15% incline
Permanently mounted LED taillights
Automatic leveling system

New stock unit, manufactured in 2025
Subject to prior sale

Working height: 7.77 m
Platform height: 5.77 m
Basket load: 230 kg / 2 people inside
1 person outside
Weight: 1,590 kg
Turning radius: 1.50 m (outside)
Gradient capability: 25%
Passage width: 0.79 m
Passage height: 1.98 m
Overall length: 1.90 m
Platform size: 1.72 m x 0.74 m
Platform extension: 0.86 m
Ground clearance: 8.7 cm

Platform extension 0.86 m with 120 kg load capacity
24 V AC electric motor (brushless)
24 V 225 Ah batteries
Battery charge indicator on upper and lower control panels
Activ’Screen on-board diagnostics
Anti-tip device (for potholes)
Two swing doors for maintenance access
Side forklift pockets
2 steerable front wheels, 2 driven rear wheels (non-marking)
Proportional lifting and lowering
Electric and manual Brake release system
Incline monitoring 1.5° / 3°
Lifting and loading points
Travel speed 0.5 – 4.5 km/h
Full height travel capability

Working height: 30.00 m
Basket load: 200 kg / 2 persons
Rotation range: Continuous
Lateral reach / 28 m: 11.60 m / 80 kg
Lateral reach / 30 m: 11.00 m / 80 kg
Empty weight: approx. 3,500 kg
Clearance width: 1.72 m
Clearance height: 2.13 m
Overall length: 8.90 m

Proportional control
Power supply via internal flat cable
Drive: 8 x 6 V / 190 Ah batteries, fully automatic charger
Diesel generator with charge generator
Operating hours counter
Telescopic boom: Aluminum, seamless
Profile guide: Nylon stainless steel
Load moment limiter, two load ranges
Angle arm: 600 mm
Work basket: Aluminum, rotatable 2 x 45°, dimensions: 0.70 x 1.20 x 1.10 m
230 V power outlet in the work basket
Tool storage in the work basket
Storage box in the drawbar
Hydraulic quick-release outriggers with support pressure monitoring
40 x 40 x 2.7 cm leveling plates with brackets
Hydraulic drive for gradients up to 15%
Operation of drive and outriggers from the work basket

Working height: 8.20 m
Basket load: 350 kg
Platform size: 2.31 m x 0.81 m
Platform travel: 0.92 m
Weight: approx. 1,655 kg
Turning radius: 2.38 m (outside)
Gradient capability: 23%
Passage width: 0.81 m
Passage height: 2.00 m
Overall length: 2.49 m
Ground clearance: 0.13 m

24 V battery drive, fully automatic charger
2-wheel drive, max.: 3.50 km/h
Operating hours counter
Inclinometer (2°)
Battery charge indicator
Solid rubber tires, non-marking gray, 38 x 13 x 5 cm
Full height range

The rough-terrain scissor lift Haulotte HS15 E integrates unique features and expands the range of possible applications. Its fully electric design delivers the same outstanding driving performance as a diesel-powered machine.

The HS15 E easily overcomes obstacles and climbs slopes of up to 45%. The all-wheel drive axles provide maximum torque and ensure optimal power distribution.

A load capacity of 750 kg and platform dimensions of up to 5.80 x 1.89 meters speak for themselves. The new electric rough-terrain scissors can be charged either via a standard 230V power outlet or an optional removable auxiliary generator.

The HS15 E PRO additionally offers features such as an optional removable range extender (for fast charging), a oscillating axle, and the Active Lighting system.

The highly off-road capable scissor lift Haulotte HS15 E PRO integrates unique features and extends its range of applications on rough terrain. Its fully electric design delivers the same outstanding driving performance as a diesel-powered machine.

The HS15 E PRO easily overcomes obstacles and climbs slopes of up to 45%. The all-wheel drive provides maximum torque, while the front oscillating axle ensures excellent traction and power distribution. A load capacity of 750 kg and platform dimensions of up to 5.80 x 1.89 meters speak for themselves. The new electric rough-terrain scissors can be charged via a standard 230V power outlet or an optional removable auxiliary generator. The outriggers level automatically.

This PRO version additionally features an optional removable range extender (for fast charging), an oscillating axle, and the Active Lighting system.

The rough-terrain scissor lift Haulotte HS18 E integrates unique features and expands its capabilities on challenging job sites. Its fully electric design delivers the same outstanding driving performance as a diesel-powered machine.

It easily overcomes obstacles and climbs slopes of up to 40%. The all-wheel drive provides maximum torque and ensures excellent power distribution. A load capacity of 750 kg and platform dimensions of up to 5.80 x 1.89 meters speak for themselves. The new electric rough-terrain scissors can be charged via a standard 230V outlet or an optional removable auxiliary generator. The outriggers level automatically.

The PRO version additionally offers an optional removable range extender (for fast charging), an oscillating axle, and the Active Lighting system.

Working height: 10.00 m
Basket load: 230 kg
Platform size: 2.30 m x 0.80 m
Platform displacement: 0.92 m
Own weight: approx. 2160 kg
Turning radius: 2.50 m (outside)
Climbing ability: 23%
Passage width: 0.81 m
Headroom: 2.18 m
Minimum headroom: 1.33 m
Total length: 2.46 m
Ground clearance: 0.13 m

Battery drive 24 V, charger fully automatic
Travel drive 2-wheel, max.: 3.00 km/h
Inclinometer 2°
Operating hours counter
Charging indicator
Tires solid rubber, gray, 38 x 13 x 5 cm
Use for indoor areas

Working height: 10.15 m
Basket load: 450 kg
Platform size: 2.30 m x 1.20 m
Platform travel: 0.92 m
Empty weight: approx. 2,330 kg
Turning radius: 2.50 m (outside)
Gradient capability: 23%
Passage width: 1.20 m
Passage height: 2.26 m
Minimum passage height: 1.40 m
Overall length: 2.45 m
Ground clearance: 0.13 m

24 V battery drive, fully automatic charger
2-wheel drive, max. speed: 3.50 km/h
Incline gauge 3°
Operating hours counter
Charge indicator
Solid rubber tires, gray, 38 x 13 x 5 cm

Haulotte Compact 10
Scissor Lift
Year of manufacture: 2020 – approx. 150 operating hours

Working height: 10.15 m
Basket load: 450 kg
Platform size: 2.30 m x 1.20 m
Platform displacement: 0.92 m
Terrain weight: approx. 2,330 kg
Turning radius: 2.50 m (outside)
Gradability: 23%
Clearance width: 1.20 m
Clearance height: 2.26 m
Minimum clearance: 1.14 m
Overall length: 2.42 m
Ground clearance: 0.13 m

24 V battery drive
Two-wheel drive, max.: 3.50 km/h
Inclinometer 3°
Hour counter
Charge indicator
Solid rubber tires, gray, 38 x 13 x 5 cm

Small, compact scissor lift, a safe alternative to ladders or scaffolding.

Working height: 5.50 m
Basket load: 240 kg / 1 person
Platform size: 0.59 m x 1.33 m
Dependent weight: approx. 440 kg
Clearance width: 0.75 m
Clearance height: 1.78 m
Total length: 1.50 m
Ground clearance: 0.07 m

12 V battery drive, fully automatic charger
Hour meter
2° / 3° inclinometer
Battery level indicator
Solid rubber tires, red, non-marking
Parking brakes
Forklift mountings
Indoor approval

23.5 m telescopic truck-mounted aerial platform with jib on Mercedes
Mileage: 59,700 km

Working height: approx. 23.30 m
Basket capacity: 265 kg / 2 persons
Horizontal outreach: 17.10 m
Gross vehicle weight: 7,490 kg
Overall width: approx. 2.50 m
Overall height: approx. 3.35 m
Overall length: approx. 8.00 m

Internal hose and cable routing
Powered by the vehicle hydraulic pump, with start stop function in the work basket
Proportional controls
Aluminium telescopic boom
Articulated jib with 180° movement
Load moment limiting system
Hydraulic outriggers
Front folding outriggers, rear vertical outriggers
Warning beacon on cab

New stock machine, built in 2025
available at short notice, subject to prior sale

Working height: approx. 12.20 m
Basket load: 200 kg / 2 people
Rotation range: 320°
Lateral reach: approx. 6.50 m / 200 kg
Own weight: approx. 1,760 kg
Minimum clearance width: approx. 0.84 m
Minimum clearance height: approx. 1.99 m
Total length: approx. 4.45 m

Fully hydraulic proportional control
External power supply
Power supply: 230V mains & Honda GX390 gasoline engine
Steel articulated telescopic boom
Basket arm, movable 90°
Removable work basket, rotatable 2 x 90°
Basket size: 0.70 x 1.10 x 1.10 m
230V socket inside Work basket
Air/water line to the work basket
Crawler chassiswith hydraulic width adjustment
Hour meter
Automatic levelling
Cable remote control
Non-marking chains

We also offer a matching transport trailer!

See product video for the R130 below

Working height: 15.00 m
Basket load: 230 kg / 2 persons
Rotation range: 360°
Lateral reach: approx. 8.50 m / 230 kg
Empty weight: approx. 7,300 kg
Turning radius: 3.70 m / outside
Gradient capability: 25%
Ground clearance: 0.15 m
Passage width: 1.50 m
Passage height: 2.10 m
Overall length: 6.60 m

Proportional control
Inclination gauge 3°
Power supply: 48 V 360 Ah battery
Battery charge indicator
Articulated telescopic boom, steel
Work basket, steel, rotatable 2 x 90°
basket dimensions: 0.80 x 1.20 x 1.10 m
Overload protection
Drive: 2-wheel proportional, max.: 5.0 km/h
Tires 21.10×12, solid rubber, non-marking

Lager-Neugerät, Baujahr 2025
Zwischenverkauf vorbehalten

Arbeitshöhe: ca. 18,50 m
Korblast: 200 kg / 2 Personen
Drehbereich: 360°
Reichweite seitlich: ca. 11,00 m / 120 kg
Eigengewicht: ca. 2.830 kg
Durchfahrtbreite min.: ca. 0,93 m
Durchfahrthöhe min.: ca. 1,98 m
Gesamtlänge: ca. 4,92 m

Proportionalsteuerung
Energieführung außenliegend
Antrieb Netz 230 V
Antrieb Benzinmotor Honda GX390
Gelenk-Teleskop-Ausleger Stahl
Lastmomentbegrenzung
Max. Steigfähigkeit 30%
Arbeitskorb Aluminium, drehbar 2 x 90°, Größe: 0,70 x 1,40 x 1,10 m, abnehmbar
Steckdose 230 V im Arbeitskorb
Betriebsstundenzähler
Schnellabstützung hydraulisch mit Stützendrucküberwachung, variabel schmal und breit
Kabel-Fernsteuerung für Kette / Stützen
Anschluss Luft / Wasser

Demo machine, built year 2025
available at short notice, subject to prior sale

Working height: approx. 17.60 m
Basket load: 200 kg / 2 people
Rotation range: 320°
Lateral reach: approx. 8.50 m / 120 kg
Own weight: approx. 2,330 kg
Minimum clearance width: approx. 0.89 m
Minimum clearance height: approx. 2.01 m
Total length: approx. 5.60 m

Fully hydraulic proportional control
External power supply
Power supply: 230V mains & Honda GX390 gasoline engine
Steel articulated telescopic boom
Load moment limiter
Jaw arm, movable 90°
Aluminum work basket, rotatable 2 x 90°
Basket size: 0.70 x 1.10 x 1.10 m Removable
230 V socket in the work platform
Air/water line to the work platform
Base plates for outriggers
Crawler undercarriage with hydraulic width adjustment
Cable remote control for undercarriage and outrigger operation
Hour counter
Automatic outrigger levelling

 

Watch the product video for the EasyLift R180 crawler work platform below.

We offer suitable transport trailers.

Working height: approx. 15.00 m
Basket load: 230 kg / 2 people
Rotation range: 360°
Reach sideways: approx. 6.80 m / 230 kg
Own weight: approx. 2,000 kg
Minimum passage width: approx. 0.83 m
Minimum headroom: approx. 1.99 m
Total length: approx. 4.12 m

Proportional control fully hydraulic
Drive 230V mains & petrol engine Honda GX390
Basket arm movable 90°
Aluminum work basket, rotatable 2 x 60°
Basket size: 0.70 x 1.10 x 1.10 m, removable
230 V socket in the work basket
Line for air/water to the work basket
Tracked chassis hydraulically adjustable in width
Automatic support
Radio remote control
non-marking chains
Operating hours counter
shims

 

See product video below

New warehouse device, built in 2025
Subject to prior sale

Working height: approx. 15.60 m
Basket load: 200 kg / 2 people
Rotation range: 320°
Reach sideways: approx. 7.50 m / 120 kg
Own weight: approx. 2,150 kg
Minimum passage width: approx. 0.84 m
Minimum headroom: approx. 1.99 m
Total length: approx. 4.93 m

Proportional control fully hydraulic
Energy supply external
Drive mains 230 V
Drive petrol engine Honda GX390
Articulated telescopic boom steel
Load moment limitation
Basket arm movable 90°
Aluminum work basket, rotatable 2 x 90°
230 V socket in the work basket
Line for air/water to the work basket
Tracked chassis hydraulically adjustable in width
Operating hours counter
Automatic support
Cable remote control
Spacer plates 400 x 300 x 20 mm, with holder
gray chains, non-marking

on request with a suitable transport trailer

Product video see below

Working height: 17.30 m
Basket load: 230 kg / 2 persons
Rotation range: 360° continuous
Lateral reach: 10.60 m / 230 kg
Empty weight: approx. 8,120 kg
Turning radius: 4.00 m / outside
Gradient capability: 50%
Ground clearance: 0.40 m
Passage width: 2.38 m
Passage height: 2.20 m
Minimum passage height: 2.15 m
Overall length: 7.60 m
Minimum overall length: 5.90 m

Proportional control, 12 V
Inclination gauge 5°
Drive: Deutz 1011 F diesel engine (28 kW / 38 hp)
Articulated telescopic boom, steel
Movable basket arm, swivel range: 140°
Work basket, steel, rotatable (2 x) 90°, Size: 0.80 x 1.80 x 1.10 m
All-wheel drive, proportional, max.: 6.0 km/h
Differential lock
All-wheel steering
Feedback geben

New warehouse device, built in 2025
Available at short notice, subject to prior sale

Working height: approx. 23.50 m
Basket load: 230 kg / 2 people
Rotation range: 360°
Reach sideways: approx. 12.00 m / 230 kg
Own weight: approx. 3,320 kg
Minimum passage width: approx. 0.99 m
Minimum headroom: approx. 1.99 m
Total length: approx. 5.97 m

Operating hours: approx. 500
Proportional control
Internal energy supply
Drive mains 230 V
Drive diesel engine Kubota 12.5 kW
Articulated telescopic boom steel
Load moment limitation
Movable basket arm
Aluminum work basket, rotatable 2 x 80°, removable
Basket size: 0.70 x 1.40 x 1.10 m
230 V socket in the work basket
Operating hours counter
Automatic support, variable narrow and wide
Home function
Radio remote control
shims
black chains

Check out this model in the product video below.

With the E140P, GSR presents an ultra-compact truck-mounted platform that perfectly combines performance and maneuverability.
Mounted on an off-road capable Ford Ranger with a total weight of only 3,190kg, this model reaches a working height of 13.25m and a horizontal outreach of up to 6.05m. Thanks to the minimal outrigger width of just 2.12m, the E140P can be used safely and efficiently even in confined working areas.

The platform can also be mounted on other pickup chassis such as Land Rover, Toyota, or Isuzu, offering maximum flexibility and customization for different applications.

All versions of the E140P impress with their easy operation, high user-friendliness, and exceptionally compact design. This makes the E140P the perfect solution for jobs where space and mobility are key.

With a working height of 12.20m, a horizontal outreach of 6.5m and a 200kg basket load, the agile R130 covers many areas of application.

With a total weight of only 1,700kg, a width of 0.89m and a height of less than 2m, the work platform on chain-chassis is also suitable for narrow access routes in the field and for areas of application with low floor loads.
The device has a width-adjustable chain chassis and is very maneuverable with a length of 4.25 m; the basket is removable, which reduces the minimum length to just 3.55 m. The outrigger area is 2.60 x 2.60 m.

We offer suitable transport trailers for this work platform.

New stock machine, built in 2025
available at short notice, subject to prior sale

Working height: approx. 16.60 m
Basket load: 220 kg / 2 people
Rotation range: 360°
Lateral reach: approx. 7.50 m / 80 kg
Total weight: 5,000 kg
Clearance width: approx. 2.05 m
Clearance height: approx. 3.52 m
Total length: approx. 7.20 m

Internal power supply
Electro-hydraulic proportional control
Ground control via cable remote control
Drive via vehicle hydraulic pump
Start/stop diesel engine in the work basket
Telescopic boom: steel
Jaw arm: movable 130°
Load moment limiter
Scratch brushes at the telescopic ends
Work basket: GRP, dimensions: 0.70 x 1.20 x 1.10 m
Hydraulic quick-release support system
Stabilisers in vehicle center
Stabiliser control from bottom
Mounting on the carrier vehicle

New stock machine, built in 2025
available at short notice, subject to prior sale

Working height: approx. 20.00 m
Basket load: 250 kg / 2 people
Rotation range: 450°
Lateral reach: approx. 14.00 m / 80 kg
Total weight: 3,500 kg
Clearance width: approx. 2.19 m
Clearance height: approx. 2.98 m
Total length: approx. 7.08 m

Superstructure paint finish: RAL 9010 Pure White
Carrier vehicle paint finish: MB9147 Arctic White
Intermediate frame and outriggers: RAL 9010 Pure White
Platform structure made of aluminum tread plate
Internal power supply
Electro-hydraulic proportional control
Drive via vehicle hydraulic pump
Start/stop diesel engine in the work basket
Telescopic boom: steel
Load moment limiter
Aluminum work basket, rotatable 2 x 70°, dimensions: 0.70 x 1.40 x 1.10 m
Hydraulic stabilisers, variable, one-sided, narrow and wide
H-shaped stabilisers at the front, vertical stabilisers at the rear
Wooden base plates 40 x 40 cm with bracket
Driver’s cab – collision protection

See product video below

New device, built in 2024, available from around June 2024
On Mercedes Benz Atego 923 AF 4×4, 7.5 tons

Working height: approx. 22.00 m
Basket load: 250 kg / 2 people
Rotation range: 450°
Reach sideways: approx. 13.20 m / 80 kg
Total weight: 7,500 kg
Passage width: approx. 2.55 m
Headroom: approx. 3.45 m
Total length: approx. 7.31 m

Internal energy supply
Electro-hydraulic proportional control
Driven by vehicle hydraulic pump
Start-stop diesel engine in the work basket
Telescopic boom steel
Basket arm movable 130°
Load moment limitation
Aluminum work basket, rotatable 2 x 90°, size: 0.70 x 1.40 x 1.10 m
Hydraulic stabilisers, vehicle wide
Vertical stabilisers at front and back
Shim plates with holder
Driver’s cab – collision protection
Automatic levelling + home function

The off-road vehicle with single off-road tires and large stabilisers lift offers a working height of 22 m, a lateral reach of over 13.0 m and a basket load of 250 kg. Vertical supports with a high support lift ensure secure stability even on terrain. Whether tree care, sign service, electrical installation, real estate, or street and Christmas lighting, your individual requirements can be met with a wide range of equipment options and carrier vehicles.

see Product video below!