Produkte Archive - Oldal 2 a 4-ből - Rothlehner Arbeitsbühnen

Working height: 15.70 m
Reach: 8.05 m / 230 kg
Basket load: 230 kg / 2 persons
Own weight: 6,950 kg
Turning radius: 3.90 m / outside
Gradability: 25%
Clearance width: 1.75 m
Height: 2.00 m
Length: 6.65 m
Work basket size: 1.20 m x 0.8 m
Swivel range: 355°
Ground clearance: 17 cm

Work basket: steel, rotatable -85°/+85°, drop bar entry
Power: 48 V (8 x 6 V) battery, 435 Ah, AC motor
2-wheel drive / 2-wheel steering, proportional, max. 5 km/h
Active’Energy Management: intelligent battery management system
Activ’Screen on-board diagnostics
Large Solid industrial tires, non-marking, 676 x 231
Lockable battery switch
Overload switch, 4° inclinometer
Max. wind speed 45 km/h
Activ’Shield bar, Activ’Lighting
Tool tray

Working height: 12.00 m
Basket load: 320 kg
Platform size: 2.27m x 1.12m
Platform displacement: 0.90 m
Own weight: approx. 2,580 kg
Turning radius: 2.20 m (outside)
Climbing ability: 25%
Passage width: 1.18 m
Transport height: 2.47 m
Total length: 2.48 m
Ground clearance: 0.19 m

Battery drive 24 V / 210Ah, charger fully automatic
Electric drive for 2 wheels, 0.8 km/h to max.: 4.00 km/h
Load capacity on platform transfer: 113 kg
Operating hours counter
Inclinometer 2°
Battery charge indicator
Steering angle 90°
Solid rubber tires

The electric articulated telescopic platform Haulotte HA 12 CJ + is only 1.20m wide and has no overhang, which makes the device very compact and sparse in confined spaces. The rotatable work basket with movable jib brings the operator into the best working position. The device also has an outdoor permit.
High efficiency is achieved by proportional and simultaneous control (multi-motion function). The self-propelled work platform HA12CJ + has a 3-D basket bar. Compared to the “normal” HA12CJ, it can also pivot the basket horizontally through 180 °.

In contrast to the electro-hydraulic TM13G, the TM13G Eco model described here is fully hydraulic. That means: stripped-down technology at a cheaper price. However, the performance data is identical, as is the proportional control. There are differences in the controls. There is also no rotating basket on this model.

The main features of this 13m articulated work platform are compact dimensions and the “up and over” function for overcoming obstacles. Various drive concepts with batteries, mains or combustion engines allow for indoor and outdoor use. The proportional fully hydraulic control is easy to maintain and user-friendly.

Working height: 25.00 m
Basket load: 200 kg / 2 people
Rotation range: endless
Lateral reach: 11.40 m / 80 kg
Weight: approx. 2,450 kg
Clearance width: 1.62 m
Clearance height: 2.10 m
Total length: 9.18 m
Minimum total length: 8.70 m

Proportional control
Power supply via internal flat cable
Battery drive: 4 x 6 V / 195 Ah/5h, fully automatic charger
Telescopic boom: aluminum, seamless
Profile guide: nylon-stainless steel
Load moment limiter, angle arm 600 mm
Work basket: aluminum, rotatable 2 x 45°
basket-dimensions: 0.70 x 1.20 x 1.10 m
230 V socket in the work basket
Operating hour meter
Tool trays in the work basket
Hydraulic stabilisers
Base plates 40 x 40 x 2.7 cm with bracket
Hydraulic maneuvering drive up to 15% gradient
LED rear lights, permanently mounted
Automatic levelling

You can see the workinfunctions of a DENKA•LIFT DK25 in the product video below

The compact 13m telescopic trailer platform Europelift TM13T offers 220kg basket load and 9 meters lateral reach.
With the help of the low weight of 1,460kg, a standard maneuvering drive and a clearance height of less than 2m, the TM13T can also reach areas that are difficult to access.

An electro-hydraulic proportional control, as well as a rotating work basket and a basket socket are also standard.
A 230V drive is available as standard; battery, diesel or petrol drives are available as options.

Product video see below

In contrast to the Europelift TM13T telescope, the Europelift TM13G has an articulated boom with a 145 ° movable jib.

The main features of this 13m Articulated Work Platform are compact dimensions and the “up and over” function for overcoming obstacles. Various drive concepts with battery, 230V or engine allow for indoor and outdoor use. The proportional, electro-hydraulic control is easy to maintain and user-friendly.

Whether for tree care, sign installation, electrical work, property management, or maintenance of street and Christmas lighting, the GSR E140TJV mounted on a Ford Transit is specifically designed to meet these versatile requirements.

The standard equipment includes electro-hydraulic proportional controls, ground controls via cable remote, and a durable fiberglass work basket.
Thanks to the 130° articulating jib, even hard-to-reach work areas can be accessed with ease.

The stabilization system features two inclined outriggers positioned in the center of the vehicle, which can be conveniently operated from the work basket.

We are happy to implement individual customer specifications upon request.
In addition, we offer attractive municipal financing options with a fixed monthly all-inclusive rate. Our team will be pleased to advise you on a customized solution.

Vlemmix Model F
Tandem low loader (e.g. suitable for Easylift caterpillar platforms with a working height of 13-18m; or for scissor platforms)

Total weight: 3,500 kg
Payload: approx. 2,750 kg
Total length: 5.80 m
Inner length: 4.00 m
Total width: 2.10 m
Internal width: 1.50 m

Standard equipment:
Welded side wall/frame construction, hot-dip galvanised
V drawbar, hot-dip galvanised
Steel ramp 1335 x 1500 mm, foldable
Floor made of multi-layer glued wood
Lashing rings 10 pcs. in the outer frame
Steel fenders, walkable
Tandem axle aggregate 3500 kg
13 inch tires
Lighting system according to StVZO, mounted on the side
Support wheel fully automatic
Plug for lighting 13 – pin
COC paper

As versatile helpers, the lightweight devices replace many ladders, easels or scaffolding.

Due to the ease of handling and the low weight, they can be used flexibly, e.g. For racking, installation work, or cleaning and painting. To meet the increased demand, is at Rothlehner recently the Instant Lift ES30TAI in the program.

The device offers 5m working height and 240kg basket load. With a total weight of only 358 kg and a width of just 0,74m, it is the lightest and one of the narrowest in the 5m class.

The PB ECo S120-12EL-Li enables an impressive working height of 11.80 m and is equally suitable for installation, assembly and maintenance work indoors and outdoors at medium heights. Powered by a powerful 24 V electric motor and lithium batteries, the stage can be maneuvered quickly and nimbly, even at full height, thanks to sensitive proportional control.

Another advantage of the ECo stage is its compact design. With a length of 2.49 m, a width of 1.15 m and a total height of 2.53 m, the scissor lift appears relatively slim. The 90° steering and a small turning radius of just 2.39 m further improve its agility.

The stage’s generously sized platform measures 2.30 m x 1.12 m and offers an impressive load capacity of 350 kg. By moving, the platform can be expanded to a maximum of 3.21 m x 1.15 m to create space for up to 2 workers including work materials.

With a weight of only 2930 kg and the possibility of reducing the height to a transport-friendly 2.00 m by folding the railings, transport is also extremely affordable.

Working height: 12.15 m
Platform capacity: 450 kg
Platform size: 2.50 m x 1.54 m
Platform extension: 1.20 m
Own weight: approx. 4,080 kg
Turning radius: 3.50 m (outside)
Gradeability: approx. 40%
Overall width: 1.80 m
Overall height: 2.54 m
Overall length: 3.17 m
Ground clearance: 0.25 m

Drive: Deutz diesel engine, 18 kW
All-wheel drive, 0.8 – 5.5 km/h
Hour meter
Tilt sensor 3°
Proportional controls
Hydraulic outriggers
Tyres: 26 x 12 – 12, off-road tread, foam-filled

– Working height: 12.00 m
– Basket load: 300 kg
– Platform size: 2.30 x 1.20 m
– Weight: approx. 2,470 kg
– Gradeability: max. 23%
– 24 V battery drive, fully automatic charger
– 2-wheel drive, max.: 3.50 km/h
– 3° inclinometer
– Hour meter
– Charge indicator
– Solid rubber tires, gray, 38 x 13 x 5 cm
– Full height travel

Working height: 12.00 m
Basket load: 300 kg
Platform size: 2.30 m x 1.20 m
Platform displacement: 0.92 m
Own weight: approx. 2630 kg
Turning radius: 2.50 m (outside)
Climbing ability: 23%
Passage width: 1.20 m
Headroom: 2.38 m
Minimum headroom: 1.26 m
Total length: 2.42 m
Ground clearance: 0.13 m

Battery drive 24 V, charger fully automatic
Travel drive 2-wheel, max.: 3.50 km/h
Inclinometer 3°
Operating hours counter
Charging indicator
Tires solid rubber, gray, 38 x 13 x 5 cm

The novelty in 2020: the Europelift TM15TJ

The new EuropeLift TM15TJ fulfills the wishes and needs of many customers for a 15m telescopic device with a movable jib arm.
The main features of this very compact 15m telescopic work platform are the high stability, horizontal outreach and the 85° movable jib arm, which makes it particularly easy to maneuver at height.

The device has a working height of 14.8m, horizontal outreach of max. 10.0m (100kg), and max. 220kg basket load. A hydraulic self-drive is part of the standard equipment,

Different drive variants are available:
230V mains (total weight approx.1,690 kg)
Mains 230V & Honda GX200 (total weight approx.1,800 kg)
Battery drive 24V (total weight approx.1,860 kg)

The highly off-road capable scissor lift Haulotte HS18 E PRO integrates unique features and expands its range of applications on rough terrain. Its fully electric design delivers the same outstanding driving performance as a diesel-powered machine.

The HS18 E PRO easily overcomes obstacles and climbs slopes of up to 40%. The all-wheel drive provides maximum torque, while the front oscillating axle ensures excellent traction and power distribution. A load capacity of 750 kg and platform dimensions of up to 5.80 x 1.89 meters speak for themselves. The new electric rough-terrain scissors can be charged via a standard 230V power outlet or an optional removable auxiliary generator. The outriggers level automatically.

This PRO version additionally features an optional removable range extender (for fast charging), an oscillating axle, and the Active Lighting system.

With the Haulotte HS21 E, the manufacturer consistently expands its PULSEO range, offering a 100% electric rough-terrain scissor lift for working heights up to 21 meters. The machine combines a high load capacity of up to 750 kg with an extendable platform length of 7.50 meters, making it ideal for installation and maintenance work both indoors and outdoors.

The quiet, emission-free electric all-wheel drive ensures excellent off-road capability, while the optional Range Extender provides additional autonomy with low energy consumption. Equipped with lithium-ion batteries, Activ’Screen diagnostics, intelligent energy management, and easy service access, the HS21 E stands for efficiency, precision, and durability in demanding jobsite conditions.

The PRO version additionally features automatic rear-wheel alignment and full all-wheel drive, further enhancing safety and maneuverability on uneven terrain.

Whether tree care, sign service, electrical installation, real estate, or street and Christmas lights,
the GSR E140TJV is specially equipped for these requirements. The carrier vehicle is e.g. an MB Sprinter 516 CDI or a Ford Transit 3.5 t.

Individual customer wishes can be realized.
We offer municipal financing options with a monthly all-inclusive rate and are happy to advise you on your individual application.

The B200T Comfort X mounted on a Mercedes-Benz Sprinter offers a working height of 20m, a horizontal outreach of up to 14.00m, and a maximum basket capacity of 250kg.

This model features a four-section telescopic boom, a new electro-hydraulic control system, a shortened wheelbase, and numerous technical improvements.
Optional equipment highlights include a Home function and an automatic outrigger system.

The variable outrigger setup allows for one-sided, narrow, or wide stabilization.
This provides an ideal solution for work in confined areas where outrigger deployment is possible only on one side.
At the front, H-type outriggers are used, while the rear is equipped with vertical outriggers.

Like all GSR models, the B200T Comfort X is built for durability and stands out through its ergonomic and intuitive operation.

The model can also be mounted on carrier vehicles with higher tonnage.
Our team will be pleased to provide individual advice tailored to your specific requirements.

The B180T Comfort X has been redesigned and is now even more compact, thanks to a shortened wheelbase of 3,665 mm. Proven features such as the three-stage telescopic boom and the intuitive and user-friendly controls are retained. The operator has a working height of 17.70 m, a maximum lateral reach of 12.70 m and a basket load of up to 300 kg.

The device has an electro-hydraulic control and can be equipped with an optional automatic support system as well as numerous intelligent further developments.

The variable support allows for one-sided, narrow or wide support, ideal for working in confined spaces when support can only be provided on one side. H-supports are used at the front and vertical supports at the rear.

Like all GSR models, the B180T Comfort X is extremely robust and impresses with its ergonomic and easy operation.

With a working height of 15.60m, a basket load of 200kg and a maximum outreach of 7.5m, the R160 is the right device for a variety of applications.

With a total weight of only 2,100kg, a width of 0.89m and a height of less than 2m, the work platform is also suitable for narrow access routes in the field and for areas of application with low floor loads. The device has a width-adjustable chain chassis and is 4.90 m long and very maneuverable; the basket is removable so the minimum length is only 4.20 m. The outrigger-area is 2.80 x 2.80 m.

We offer suitable transport trailers for this work platform.

The articulated telescopic work platform Easy Lift RA15 offers 15.00m working height, 6.m horizontal outreach and 230kg basket load in the entire working area.

With a total weight of only 2,000kg, a minimum width of only 0.80m and a construction height of 2m, the crawler working platform is also suitable for narrow access routes in the field and for areas of application with low floor loads. The device has a width-adjustable chain running gear and is very maneuverable with a length of 4.51 m. The basket is removable so the minimum length is only 3.81m. The stabiliser area is 2.98 x 2.94 m.

The standard equipment of the hydraulic chain working platform includes a rotatable basket (60 + 60°) with a movable jib arm to enable the user to reach protruding buildings and difficult places. The standard includes a hybrid drive consisting of a 230V mains drive & Honda GX390 petrol engine, as well as a cable remote control for the chain chassis.

We offer suitable transport trailers for this work platform.

With the Haulotte HS21 E Pro, the manufacturer consistently continues its PULSEO range, offering a 100% electric rough-terrain scissor lift for working heights up to 21 meters. The machine combines a high load capacity of up to 750 kg with an extendable platform length of 7.50 meters, making it ideal for installation and maintenance work both indoors and outdoors.

The quiet, emission-free electric all-wheel drive ensures excellent off-road performance, while the optional range extender provides additional autonomy with low energy consumption. Featuring lithium-ion batteries, Activ’Screen diagnostics, intelligent energy management, and easy service access, the HS21 E stands for efficiency, precision, and durability in demanding jobsite conditions.

The PRO version additionally includes automatic rear-wheel alignment and full all-wheel drive, further improving safety and maneuverability on uneven terrain.

The truck-mounted platform with full-width vertical outriggers offers a maximum basket capacity of 250kg across the entire working area, with a horizontal outreach of up to 8.60m.

A major advantage of the double-articulated boom design is that the platform can be positioned closer to the work area compared to a telescopic platform. This makes it particularly suitable for roof work and for tasks in confined spaces.

With a wide range of optional equipment, the machine can be individually configured to suit the specific application and user requirements.

The double-articulated platform GSR B200PX enjoys strong demand. One key reason for its popularity is the innovative “Balanced Swing” concept.

This design features a centrally positioned double boom, allowing unrestricted rotation even when the boom is fully lowered.
If rotation is not desired, for example in street areas or during façade work, the already structurally minimized tail swing can be further reduced using the standard selector switch in the basket.

elektrische Scheren-Arbeitsbühne
Robust und zuverlässig. Ideal für Elektro-, Installations- und Wartungsarbeiten in Hallen, Produktionsbereichen oder auf ebenen Außenflächen. Der elektrische Direktantrieb sorgt für leisen, emissionsfreien Betrieb.

ungefähre Leistungsdaten:

Maximale Arbeitshöhe: 13,90 m
Maximale Tragfähigkeit: 350 kg
Gewicht: 3.315 kg
Plattformgröße: ca. 2,26 m x 1,20 m
Plattform-Ausschub: 0,90 m
Transportlänge: ca. 2,47 m
Transportbreite: 1,22 m
Transporthöhe: ca. 2,54 m

With a working height of 17.80m, a maximum horizontal outreach of 8.5m and a basket load of 200kg, the R180 is the ideal device for a variety of uses.

With a total weight of 2,330kg, a minimum passage width of 0.89m and a height of 1.95m, this track mounted work platform is suitable for narrow access routes in the field and for areas of application with low floor loads. The device with fully hydraulic control has a width-adjustable chain chassis and is very maneuverable with a length of 5.48m. The work basket can be rotated 180° and removed, reducing the minimum length to only 4.78m. The outrigger-area is 3.10 x 3.10m.

We offer suitable transport trailers for this work platform.

With a working height of 18.50m, a maximum outreach of 11m and a basket load of 200kg, the R190 is suitable for a variety of uses.

The total weight of the fully hydraulic track-mount is 2,800kg. The construction height is less than 2m and the minimum passage width is 0.89m; the climbing ability is at 30% slope. The work basket can be rotated 180°. The R190 chain platform is particularly suitable for off-road requirements, for narrow access roads and areas with low soil loads.

The device has variable outriggers (narrow or wide) as well as a 230V socket in the basket. A cable remote control for crawler tracks / supports is standard, as well as a connection for air and water lines. A hybrid drive is used as standard, consisting of a 230V mains drive & Honda GX390 petrol engine

Of course, we offer suitable transport trailers for this work platform.

The EasyLift RA21 offers maximum flexibility and efficiency for work at great heights and in hard-to-reach areas. With a working height of 20.40 meters and an outreach of 10.00 meters, it enables precise operation even in confined spaces. Thanks to its compact dimensions (min. 4.60 m length, 0.89 m width, 1.99 m height), it fits easily through narrow gates and passages. With a weight of 2,860 kg, it can be transported on a trailer.

The articulated jib with a 90° working range and the 160° rotating basket with a load capacity of 230 kg make work in demanding environments easier. The controls are intuitive and ensure precise, smooth movements.

For maximum versatility, the RA21 offers various power options: standard with 230 V mains drive and petrol engine; optionally available with a hybrid drive combining lithium battery and diesel engine. A radio remote control is included as standard. Options include automatic outrigger leveling or non-marking grey tracks, as well as a winch for lifting loads up to 230 kg – ideal for craning materials into courtyards, lifting PV modules onto roofs, or performing deep below-ground work.

Whether for maintenance, installation, or tree-care applications – the RA21 combines advanced technology with easy transport and outstanding performance for a wide range of uses.

Matching transport trailers are available on request.

The Easy Lift R210 offers a full 21.20m working height and is therefore suitable for a variety of uses. The chain device with proportional control still has a basket load of 200kg and a maximum of 11.00m latehorizontal outreach (at 120kg).

The width is 0.89 m and the height 1.93 m, which means that the device fits through the vast majority of standard doors and also cuts a fine figure in the field or on narrow access roads. A movable basket arm with 90° and a work basket that can be rotated by 180° make it easier for the operator to reach hard-to-reach destinations.
A hybrid drive consisting of a 230V mains & Honda GX390 petrol engine is used as standard (optional drive with diesel engine).
Also standard are: 230V socket in the basket, operating hours counter, variable stabilisers narrow and wide, remote control.

The GSR B210PXJ Comfort X has a double boom with a jib arm and a flat basket linkage.

The articulated telescopic platform has a 2.4 m long jib arm and a cage linkage without a substructure under the work basket. This makes it particularly suitable for use in which obstacles have to be approached closely and precisely from above, e.g. on roofs.

The B210PXJ is built on a 3.5-tonne Mercedes chassis and offers a range of 10 meters and a basket load of 250 kg across the entire working diagram.

The newly developed Easy Lift RA24 can be ordered from 2021. The model will have a double under-boom, which makes the machine a compact, lightweight device (minimum transport dimensions: L 5.20 m, W 0.99 m, H 2.00 m).

The operator has a working height of 23.50 m; the basket load of 230kg is achieved in the entire work area; the maximum lateral reach is 12.00 m.

The chain-chassis work platform with proportional electrohydraulic control comes with a hybrid drive as standard, consisting of 230V mains & Kubota diesel engine. A hybrid drive consisting of a lithium battery & diesel engine is optional. A radio remote control is standard.

The movable jib arm and a rotable basket by 160 ° make it easier for the operator to reach locations that are difficult to access.
Variable outriggers are also available as standard, i.e. a one-sided, narrow or wide stabilisation is possible.

In contrast to the R260, the Easy Lift RA26 has an articulated telescope. The advantage here is the enormous up-and-over height of the machine.

The operator has a full 26m working height at his disposal, with a total weight of 3,800kg. The maximum outreach is 14.50m and the maximum basket load is 230kg. The minimum passage width is only 0.89m, the passage height is 2.00m.

The crawler work platform with proportional control comes with a hybrid drive as standard, consisting of 230V mains & Kubota diesel engine

A movable basket arm and a basket that can be rotated by 180° make it easier for the operator to reach locations that are difficult to access.
The variable support and a radio remote control for the chain trolley are standard.

The Easy Lift R260 brings you to an impressive 26.20m working height. The chain-chassis platform with proportional control offers 230kg basket load and a maximum of 13.50m lateral reach (at 120kg).

The passage width is only 1.40m and the overall height is 2.00m, which means that the device fits through many a door.
A movable basket arm and a rotable basket make it easier for the operator to reach locations that are difficult to access.
The variable stabilisers and a radio remote control for the chain trolley are standard.

A hybrid drive consisting of a 230V mains & diesel engine is used as a standard drive.

Special equipment including:
RAL special color, automatic levelling, gray rubber chains, GRP work basket

The Easy Lift R300 is the big brother of the R260 and brings you up to 30m working height. The crawler work platform with proportional control offers 230kg basket load and a maximum of 14.50m outreach (at 120kg).

The passage width is 1.40 m and the construction height is 2.00 m. A movable jib arm and a basket that can be rotated by 180° make it possible to get to difficult locations.

As standard, the R300 is equipped with a hybrid drive consisting of a 230V mains and a diesel engine. In addition, variable outriggers as well as a radio remote control for the track chassis.

The Easy Lift RA31 is the big brother of the RA26 and brings you to a working height of 30.20 m. This machine has an articulated telescope, which enables an enormous overreach height over obstacles.

The crawler work platform with proportional control comes with a hybrid drive as standard, consisting of 230V mains & Kubota diesel engine. With a total weight of 4,200kg, this device offers a maximum outreach of 14.50m and the maximum basket load is 230kg.
The minimum passage width is only 0.89m, the passage height is 2.00m.

A movable basket arm and a work basket that can be rotated by 180° make it easier for the operator to reach locations that are difficult to access.
The variable support and a radio remote control for the chain chassis are standard.

The Easy Lift R360 offers 36m working height and a maximum of 16m lateral reach.This chain platform is primarily made for the maintenance or cleaning of tall buildings where space is limited. With its compact dimensions for this working height, this crawler platform on rubber tracks is suitable for indoor and outdoor use.

The R360 can be stabilised variably and climbs slopes of up to 30%. The track mounted platform can even work up to 5m in the negative working area, i.e. downwards.

The passage width is 1.40 m and the construction height is 2.10 m. A movable basket arm and a basket that can be rotated by 180 ° also enable work in hard-to-reach places, e.g. Building protrusions.

This chain working platform is equipped with a hybrid drive as standard. Mains drive 230V and diesel motor are available. In addition, a radio remote control for the chain chassis is part of the standard equipment.

The Easy Lift R420 with a working height of 41.40m and a basket load of 300kg (in the entire work diagram!) is the current “flagship” of Easylift.

This caterpillar work platform is mainly used for the maintenance or cleaning of tall buildings where space is limited. Maintenance or cleaning of tall buildings in confined spaces are the main purposes. These compact and extremely manoeuvrable platforms offer the greatest benefits, especially in rental, at airports, in shopping centers or other buildings with high atriums and complex architecture; but the R420 chain platform also shows its advantages outdoors and in the field.

The R420 can be stabilised variably and offers a maximum lateral reach of no less than 17,00 m. Gradients of up to 30% are no problem.
The passage width is only 1.40 m and the construction height is 2.20 m. A movable basket arm and a basket that can be rotated by 180 ° also allow access to hard-to-reach places (e.g. building projections).

This track-mounted platform offers a hybrid drive as standard, consisting of 230V mains and diesel engine. In addition, a radio remote control for the chain chassis is part of the standard equipment.

Working height: 28.00 m / 120 kg
Working height: 25.00 m / 200 kg
Basket load max.: 200 kg / 2 people
Rotation range: endless
Reach sideways at 25m: 10.50 m / 80 kg
Reach sideways at 28m: 12.00 m / 80 kg
Own weight: approx. 2,600 kg
Passage width: 1.37 m
Minimum passage width: 0.87 m
Headroom: 1.97 m
Total length: 7.31 m
Minimum total length: 6.22 m / without basket

Proportional control
Battery drive
Aluminum work basket, removable
Basket size: 0.70 x 1.20 x 1.10 m
230 V socket in the work basket
Hydraulic support
Spacer plates 40 x 40 x 2.7 cm with holder
Track width variable
Hydraulic travel drive up to 10% gradient

Working height: 30.00 m
Basket load: 200 kg / 2 people
Rotation range: Endless
Reach sideways / 28 m: 11.60 m / 80 kg
Reach sideways / 30 m: 11.00 m / 80 kg
Own weight: approx. 3500 kg
Passage width: 1.72 m
Headroom: 2.13 m
Total length: 8.90 m

Proportional control
Energy supply via internal flat cable
Drive battery 8 x 6 V / 190 Ah, charger fully automatic
Telescopic aluminum boom, seamless
Profile guide nylon stainless steel
Load moment limitation, two load ranges
Angle arm 600 mm
Aluminum work basket, rotatable 2 x 45°, size: 0.70 x 1.20 x 1.10 m
230 V socket in the work basket
Hydraulic quick support with support pressure monitoring
Hydraulic travel drive up to 15% gradient
Operation of the travel drive and support in the work basket

The Europelift TM16TJi is the big brother of the TM15TJ and offers a good meter more working height.
The TM16TJi is light and maneuverable. The movable angle arm and the rotating basket enable precise control of locations.

In this trailer platform class, the basket arm of the Europelift TJ series is a unique selling point on the market.
The proven modular system is also used in this model; the simple operation and the good price-performance ratio are typical of Europelift.

Standard equipment:
Proportional control
Drive mains 230 V
Petrol direct drive
Basket arm movable 85°
Work basket rotates 2 x 45°
230 V socket in the work basket
Hydraulic support
Hydraulic shunting drive
Home function
Spacer plates 40 x 40 x 2.7 cm with holder

Product video see below

Compact dimensions and high maneuverability are the advantages of the telescopic mast work platforms. The concept of the Haulotte Star 10 has proven itself; Especially in indoor applications with small footprint and narrow passage passages it has advantages through its compactness.

With the articulated arm lateral reach up to 3 m is possible and the devices can be moved even when fully extended.
Practical tool trays, operating hours counter, abrasion-free tires and fully automatic chargers complete the standard equipment.

Arbeitshöhe: 17,10 m
Korblast: 400 kg / 2 Personen
Plattformgröße: 2,90 x 1,19 m
Plattformverschub: 1,00 m
Eigengewicht: 4.670 kg
Wenderadius: 2,82 m / außen
Steigfähigkeit: 25 %
Bodenfreiheit: 0,15 m
Durchfahrtbreite: 1,22 m
Durchfahrthöhe minimal: 2,36 m
Gesamtlänge: 3,00 m

Proportionalsteuerung
Batterien 8 x 6 V / 200 Ah, Ladegerät vollautomatisch
Plattformerweiterung ausschiebbar
Aufsetzschutz für Plattform
Betriebsstundenzähler
Schlagloch-Schutzsystem
Geländer klappbar
Bedienpult abnehmbar
Fahrantrieb 2-Rad, proportional, max.: 2,40 km/h
Kraftgang zuschaltbar
Differentialsperre
Bereifung Vollgummi weiß
Einsatz für Innenbereiche

With the new HT16RTJ Pro, Haulotte is expanding the range of diesel telescopic self-propelled machines downwards. The 16m telescopic boom lift offers 16.1 m working height, max. 13 m horizontal outreach, as well as max. 350 kg basket load.

Four-wheel drive and four-wheel steering with pendulum axle as standard for best off-road mobility. With the multi-movement function, 360 ° endless rotation and the 1.80m articulated jib-arm, even difficult-to-reach targets can be accessed with pinpoint accuracy.

Further standard equipment includes the on-board diagnostic tool, a differential with operator-controlled lock, a universal telematics connection, large rough terrain tires and a rotating beacon. The Haulotte HT16RTJ Pro is powered by a level 5 Kubota diesel engine, which does not require a particle filter.

Working height: 30.00 m
Basket load: 200 kg / 2 people
Rotation range: endless
Lateral reach / 28 m: 11.60 m / 80 kg
Lateral reach / 30 m: 11.00 m / 80 kg
Net weight: approx. 3,500 kg
Passage width: 1.72 m
Headroom: 2.13 m
Total length: 8.90 m

proportional control
Drive battery 8 x 6 V / 180 Ah
Drive diesel engine
hour meter
Aluminum work basket, rotatable 2 x 45°
Basket size: 0.70 x 1.20 x 1.10 m
230 V socket in the work basket
Tool trays in the work basket
hydraulic stabilisers
Shims 40 x 40 x 2.7 cm with holder
Hydraulic travel drive up to 15% incline
Operation of travel drive and outriggers in the work basket

The DENKA•LIFT DL 30 is the world’s highest trailer work platform with a working height of 30m and a total weight of 3,500kg. Hybrid drive, compact dimensions with a width of 1.72 m and a minimum headroom of less than 2.00 m

You can see how a DENKA•LIFT DL30 works in the attached video

The Easy Lift RA53, with a working height of 52.40m and a maximum basket load of 360kg, is the current flagship model from Easylift. It offers a maximum lateral outreach of 20.00m (with 120kg), an up-and-over reach point at 32m, and weighs approximately 14,500kg.

With a clearance width and height of under 2.00m and a 30% gradeability, this hybrid machine performs well both indoors and outdoors. A telescopic lower and upper arm, along with a 180° rotating basket arm, allow access to hard-to-reach areas.

This tracked platform comes standard with a hybrid drive (230V mains & diesel engine) and a 300kg basket load. Optional features include an additional battery drive, automatic stabilization, a 1,000kg winch, increased basket load to 360kg, spotlights, intercom, and more.

The PB ECo S140-12EZ-Li with electric direct drive and lithium batteries is a compact class scissor lift that enables a working height of 13.80 m. With the sensitive proportional control, the stage can be moved comfortably and the platform can be maneuvered both vertically up and down.

The platform of the stage measures 2.30 m x 1.12 m and is equipped with a load capacity of 350 kg. With an additional displacement of 0.91 m in the longitudinal direction, the platform can be expanded to a maximum of 3.21 m x 1.12 m, which offers space for 2 workers for indoor use including materials and tools.

The compactness of the PB ECo S140-12EZ-Li is reflected primarily in its dimensions: it has a length of 2.49 m, a width of 1.15 m and a total height of 2.66 m, which makes it comparatively slim . The easily foldable railing allows the height to be reduced to a low 2.13 m.

With a low weight of 3,000 kg, 90° steering and a small turning radius, the PB ECo S140-12EZ-Li can be moved quickly and maneuverably – even at full height without any problems.

Due to its excellent maneuverability and compact dimensions, the Haulotte Optimum8 can be used for be used optimally in industry, craft, or rental. The device offers proportional and fast movements and is approved for indoor and outdoor use. Standard doors are no obstacle.

Maximum safety is achieved by tilting and tilting (Pot Hole). The tires are non-marking and can also be used on sensitive soils.
The compact electric scissor lifts are extremely robust and require minimal maintenance.

The scissor lift S151-16E of the TOP16 series is ideal for working in medium high situations. With a length of 3.18 m, a width of 1.60 m and a height of 3.00 m, the S151-16E is also comparatively compact.
The platform carries loads of up to 550 kg, and by means of manual platform displacement, the platform can be set to max. Expand 4.08 mx 1.58 m. Enough space and power for up to 2 people, material and tools – both indoors and outdoors.

The model weighs a slim 4,740 kg and is therefore predestined for work that requires a low floor load. Folding railings also ensure a stage height of only 2.12 m, which makes it easier for the user to handle during transport and at low clearance heights.
A standard differential lock rounds off the profile of the PB S151-16E.

The scissor lift S151-16E of the TOP16 series is ideal for working in medium high situations. With a length of 3.18 m, a width of 1.60 m and a height of 3.00 m, the S151-16E is also comparatively compact.
The platform carries loads of up to 550 kg, and by manual platform displacement, it can be set to max. Expand 4.08 mx 1.58 m. Enough space and power for up to 2 workers, materials and tools – both indoors and outdoors.