With a working height of 17.80m, a maximum horizontal outreach of 8.5m and a basket load of 200kg, the R180 is the ideal device for a variety of uses.

With a total weight of 2,330kg, a minimum passage width of 0.89m and a height of 1.95m, this track mounted work platform is suitable for narrow access routes in the field and for areas of application with low floor loads. The device with fully hydraulic control has a width-adjustable chain chassis and is very maneuverable with a length of 5.48m. The work basket can be rotated 180° and removed, reducing the minimum length to only 4.78m. The outrigger-area is 3.10 x 3.10m.

We offer suitable transport trailers for this work platform.

With a working height of 18.50m, a maximum outreach of 11m and a basket load of 200kg, the R190 is suitable for a variety of uses.

The total weight of the fully hydraulic track-mount is 2,800kg. The construction height is less than 2m and the minimum passage width is 0.89m; the climbing ability is at 30% slope. The work basket can be rotated 180°. The R190 chain platform is particularly suitable for off-road requirements, for narrow access roads and areas with low soil loads.

The device has variable outriggers (narrow or wide) as well as a 230V socket in the basket. A cable remote control for crawler tracks / supports is standard, as well as a connection for air and water lines. A hybrid drive is used as standard, consisting of a 230V mains drive & Honda GX390 petrol engine

Of course, we offer suitable transport trailers for this work platform.

Working height: 14.00 m
Platform capacity: 350 kg
Platform size: 2.30 m x 1.20 m
Platform extension: 0.92 m
Dead weight: approx. 3,175 kg
Turning radius: 2.50 m (outer)
Gradeability: 23%
Overall width: 1.20 m
Overall height: 2.50 m
Minimum height: 2.08 m
Overall length: 2.45 m
Ground clearance: 0.13 m

24 V battery drive, fully automatic charger
2-wheel drive, max. speed: 3.50 km/h
3° tilt sensor
Hour meter
Charge indicator
Folding guardrails
Solid rubber tires, grey, 15 x 5 cm
Driveable at full height

The EasyLift RA21 offers maximum flexibility and efficiency for work at great heights and in hard-to-reach areas. With a working height of 20.40 meters and an outreach of 10.00 meters, it enables precise operation even in confined spaces. Thanks to its compact dimensions (min. 4.60 m length, 0.89 m width, 1.99 m height), it fits easily through narrow gates and passages. With a weight of 2,860 kg, it can be transported on a trailer.

The articulated jib with a 90° working range and the 160° rotating basket with a load capacity of 230 kg make work in demanding environments easier. The controls are intuitive and ensure precise, smooth movements.

For maximum versatility, the RA21 offers various power options: standard with 230 V mains drive and petrol engine; optionally available with a hybrid drive combining lithium battery and diesel engine. A radio remote control is included as standard. Options include automatic outrigger leveling or non-marking grey tracks, as well as a winch for lifting loads up to 230 kg – ideal for craning materials into courtyards, lifting PV modules onto roofs, or performing deep below-ground work.

Whether for maintenance, installation, or tree-care applications – the RA21 combines advanced technology with easy transport and outstanding performance for a wide range of uses.

Matching transport trailers are available on request.

The GSR B210PXJ Comfort X has a double boom with a jib arm and a flat basket linkage.

The articulated telescopic platform has a 2.4 m long jib arm and a cage linkage without a substructure under the work basket. This makes it particularly suitable for use in which obstacles have to be approached closely and precisely from above, e.g. on roofs.

The B210PXJ is built on a 3.5-tonne Mercedes chassis and offers a range of 10 meters and a basket load of 250 kg across the entire working diagram.

The newly developed Easy Lift RA24 can be ordered from 2021. The model will have a double under-boom, which makes the machine a compact, lightweight device (minimum transport dimensions: L 5.20 m, W 0.99 m, H 2.00 m).

The operator has a working height of 23.50 m;  the basket load of 230kg is achieved in the entire work area; the maximum lateral reach is 12.00 m.

The chain-chassis work platform with proportional electrohydraulic control comes with a hybrid drive as standard, consisting of 230V mains &  Kubota diesel engine. A hybrid drive consisting of a lithium battery & diesel engine is optional.  A radio remote control is standard.

The movable jib arm and a rotable basket by 160 ° make it easier for the operator to reach locations that are difficult to access.
Variable outriggers are also available as standard, i.e. a one-sided, narrow or wide stabilisation is possible.

In contrast to the R260, the Easy Lift RA26 has an articulated telescope. The advantage here is the enormous up-and-over height of the machine.

The operator has a full 26m working height at his disposal, with a total weight of 3,800kg.  The maximum outreach is 14.50m and the maximum basket load is 230kg. The minimum passage width is only 0.89m, the passage height is 2.00m.

The crawler work platform with proportional control comes with a hybrid drive as standard, consisting of 230V mains & Kubota diesel engine

A movable basket arm and a basket that can be rotated by 180° make it easier for the operator to reach locations that are difficult to access.
The variable support and a radio remote control for the chain trolley are standard.

 

The Easy Lift R260 brings you to an impressive 26.20m working height. The chain-chassis platform with proportional control offers 230kg basket load and a maximum of 13.50m lateral reach (at 120kg).

The passage width is only 1.40m and the overall height is 2.00m, which means that the device fits through many a door.
A movable basket arm and a rotable basket make it easier for the operator to reach locations that are difficult to access.
The variable stabilisers and a radio remote control for the chain trolley are standard.

A hybrid drive consisting of a 230V mains & diesel engine is used as a standard drive.

Special equipment including:
RAL special color,  automatic levelling,  gray rubber chains,  GRP work basket

 

The Easy Lift R300 is the big brother of the R260 and brings you up to 30m working height. The crawler work platform with proportional control offers 230kg basket load and a maximum of 14.50m outreach (at 120kg).

The passage width is 1.40 m and the construction height is 2.00 m.  A movable jib arm and a basket that can be rotated by 180° make it possible to get to difficult locations.

As standard, the R300 is equipped with a hybrid drive consisting of a 230V mains and a diesel engine.  In addition, variable outriggers as well as a radio remote control for the track chassis.

The Easy Lift RA31 is the big brother of the RA26 and brings you to a working height of 30.20 m.  This machine has an articulated telescope, which enables an enormous overreach height over obstacles.

The crawler work platform with proportional control comes with a hybrid drive as standard, consisting of 230V mains & Kubota diesel engine. With a total weight of 4,200kg, this device offers a maximum outreach of 14.50m and the maximum basket load is 230kg.
The minimum passage width is only 0.89m, the passage height is 2.00m.

A movable basket arm and a work basket that can be rotated by 180° make it easier for the operator to reach locations that are difficult to access.
The variable support and a radio remote control for the chain chassis are standard.

The Easy Lift R360 offers 36m working height and a maximum of 16m lateral reach.This chain platform is primarily made for the maintenance or cleaning of tall buildings where space is limited. With its compact dimensions for this working height, this crawler platform on rubber tracks is suitable for indoor and outdoor use.

The R360 can be stabilised variably and climbs slopes of up to 30%. The track mounted platform can even work up to 5m in the negative working area, i.e. downwards.

The passage width is 1.40 m and the construction height is 2.10 m. A movable basket arm and a basket that can be rotated by 180 ° also enable work in hard-to-reach places, e.g. Building protrusions.
This chain working platform is equipped with a hybrid drive as standard. Mains drive 400V and diesel motor are available. In addition, a radio remote control for the chain chassis is part of the standard equipment.

The Easy Lift R420 with a working height of 41.40m and a basket load of 300kg (in the entire work diagram!) is the current “flagship” of Easylift.

This caterpillar work platform is mainly used for the maintenance or cleaning of tall buildings where space is limited. Maintenance or cleaning of tall buildings in confined spaces are the main purposes. These compact and extremely manoeuvrable platforms offer the greatest benefits, especially in rental, at airports, in shopping centers or other buildings with high atriums and complex architecture; but the R420 chain platform also shows its advantages outdoors and in the field.

The R420 can be stabilised variably and offers a maximum lateral reach of no less than 17,00 m. Gradients of up to 30% are no problem.
The passage width is only 1.40 m and the construction height is 2.20 m. A movable basket arm and a  basket that can be rotated by 180 ° also allow access to hard-to-reach places (e.g. building projections).

This track-mounted platform offers a hybrid drive as standard, consisting of 230V mains and diesel engine. In addition, a radio remote control for the chain chassis is part of the standard equipment.

The GSR B220PXE Comfort X with variable support can be mounted on a Mercedes Sprinter or Iveco Daily. Thanks to the basket linkage without a substructure, it is particularly suitable for applications where obstacles have to be reached at close range and precisely from above – ideal, for example. B. for work on roofs.

With a working height of 21.50 m, a maximum basket load of 250 kg and a lateral reach of up to 11.20 m with a basket load of 120 kg, the B220PXE offers high performance and flexibility. The electro-hydraulic proportional control ensures precise control, while the H-supports at the front and vertical supports at the rear ensure stable support. An automatic support function is available as an option.

The ergonomically optimized controls on the floor and in the basket enable easy and intuitive handling.

See product video below

B220PXE on Isuzu chassis – the compact alternative
The B220PXE is also available on an Isuzu chassis with Compact outriggers. This variant has a vehicle-wide support with vertical supports at the front and rear.

With a design almost one meter shorter than the Mercedes version, the Isuzu model offers a particularly compact solution. Thanks to the engine located further back, the B240PX Isuzu can also use its entire lateral reach beyond the driver’s cab. In addition, the optimized weight distribution enables this model to achieve the same performance values ​​with vehicle-wide support as the Mercedes with wide support.

Working height: 28.00 m / 120 kg
Working height: 25.00 m / 200 kg
Basket load max.: 200 kg / 2 people
Rotation range: endless
Reach sideways at 25m: 10.50 m / 80 kg
Reach sideways at 28m: 12.00 m / 80 kg
Own weight: approx. 2,600 kg
Passage width: 1.37 m
Minimum passage width: 0.87 m
Headroom: 1.97 m
Total length: 7.31 m
Minimum total length: 6.22 m / without basket

Proportional control
Battery drive
Aluminum work basket, removable
Basket size: 0.70 x 1.20 x 1.10 m
230 V socket in the work basket
Hydraulic support
Spacer plates 40 x 40 x 2.7 cm with holder
Track width variable
Hydraulic travel drive up to 10% gradient

The Europelift TM16TJi is the big brother of the TM15TJ and offers a good meter more working height.
The TM16TJi is light and maneuverable. The movable angle arm and the rotating basket enable precise control of locations.

In this trailer platform class, the basket arm of the Europelift TJ series is a unique selling point on the market.
The proven modular system is also used in this model; the simple operation and the good price-performance ratio are typical of Europelift.

Standard equipment:
Proportional control
Drive mains 230 V
Petrol direct drive
Basket arm movable 85°
Work basket rotates 2 x 45°
Hydraulic support
Hydraulic shunting drive
Home function
Spacer plates 40 x 40 x 2.7 cm with holder

 

Product video see below

Compact dimensions and high maneuverability are the advantages of the telescopic mast work platforms. The concept of the Haulotte Star 10 has proven itself; Especially in indoor applications with small footprint and narrow passage passages it has advantages through its compactness.

With the articulated arm lateral reach up to 3 m is possible and the devices can be moved even when fully extended.
Practical tool trays, operating hours counter, abrasion-free tires and fully automatic chargers complete the standard equipment.

With the new HT16RTJ Pro, Haulotte is expanding the range of diesel telescopic self-propelled machines downwards. The 16m telescopic boom lift offers 16.1 m working height, max. 13 m horizontal outreach, as well as max. 350 kg basket load.

Four-wheel drive and four-wheel steering with pendulum axle as standard for best off-road mobility. With the multi-movement function, 360 ° endless rotation and the 1.80m articulated jib-arm, even difficult-to-reach targets can be accessed with pinpoint accuracy.

Further standard equipment includes the on-board diagnostic tool, a differential with operator-controlled lock, a universal telematics connection, large rough terrain tires and a rotating beacon. The Haulotte HT16RTJ Pro is powered by a level 5 Kubota diesel engine, which does not require a particle filter.

 

The Easy Lift RA53, with a working height of 52.40m and a maximum basket load of 360kg, is the current flagship model from Easylift. It offers a maximum lateral outreach of 20.00m (with 120kg), an up-and-over reach point at 32m, and weighs approximately 14,500kg.

With a clearance width and height of under 2.00m and a 30% gradeability, this hybrid machine performs well both indoors and outdoors. A telescopic lower and upper arm, along with a 180° rotating basket arm, allow access to hard-to-reach areas.

This tracked platform comes standard with a hybrid drive (230V mains & diesel engine) and a 300kg basket load. Optional features include an additional battery drive, automatic stabilization, a 1,000kg winch, increased basket load to 360kg, spotlights, intercom, and more.

The PB ECo S140-12EZ-Li with electric direct drive and lithium batteries is a compact class scissor lift that enables a working height of 13.80 m. With the sensitive proportional control, the stage can be moved comfortably and the platform can be maneuvered both vertically up and down.

The platform of the stage measures 2.30 m x 1.12 m and is equipped with a load capacity of 350 kg. With an additional displacement of 0.91 m in the longitudinal direction, the platform can be expanded to a maximum of 3.21 m x 1.12 m, which offers space for 2 workers for indoor use including materials and tools.

The compactness of the PB ECo S140-12EZ-Li is reflected primarily in its dimensions: it has a length of 2.49 m, a width of 1.15 m and a total height of 2.66 m, which makes it comparatively slim . The easily foldable railing allows the height to be reduced to a low 2.13 m.

With a low weight of 3,000 kg, 90° steering and a small turning radius, the PB ECo S140-12EZ-Li can be moved quickly and maneuverably – even at full height without any problems.

The scissor lift S151-16E of the TOP16 series is ideal for working in medium high situations. With a length of 3.18 m, a width of 1.60 m and a height of 3.00 m, the S151-16E is also comparatively compact.
The platform carries loads of up to 550 kg, and by means of manual platform displacement, the platform can be set to max. Expand 4.08 mx 1.58 m. Enough space and power for up to 2 people, material and tools – both indoors and outdoors.

The model weighs a slim 4,740 kg and is therefore predestined for work that requires a low floor load. Folding railings also ensure a stage height of only 2.12 m, which makes it easier for the user to handle during transport and at low clearance heights.
A standard differential lock rounds off the profile of the PB S151-16E.

The scissor lift S151-16E of the TOP16 series is ideal for working in medium high situations. With a length of 3.18 m, a width of 1.60 m and a height of 3.00 m, the S151-16E is also comparatively compact.
The platform carries loads of up to 550 kg, and by manual platform displacement, it can be set to max. Expand 4.08 mx 1.58 m. Enough space and power for up to 2 workers, materials and tools – both indoors and outdoors.

The model weighs a slim 4,740 kg and is therefore predestined for work that requires a low floor load. Folding railings also ensure a stage height of only 2.12 m, which makes it easier for the user to handle during transport and at low clearance heights.
A standard differential lock rounds off the profile of the PB S151-16E.

The scissor lift S171-16E of the TOP16 series is ideal for working in medium-high situations. With a length of 3.18 m, a width of 1.60 m and a height of 3.22 m, the S171-16E is also comparatively compact.
The platform carries loads of up to 400 kg, and by manual platform displacement, it can be set to max. Expand 4.08 mx 1.58 m. Enough space and power for up to 2 workers, materials and tools – both indoors and outdoors.

The model weighs a slim 5,120 kg and is thus predestined for work that requires a low floor load. Folding railings also ensure a stage height of only 2.34 m, which makes it easier for the user to handle transport and low clearance heights.
A standard differential lock rounds off the profile of the PB S171-16E.

The scissor lift PB S171-16ES with a working height of 17.10 m differs from the S171-16E by the support system, which offers up to 200 mm level compensation. With just the push of a button, the scissor lift levels automatically within a few seconds. This allows an exactly vertical or parallel stroke to the object with optimum stability. Of course, the S171-16ES can also be used without supports and is (like all PB work platforms) movable in full height.

The model weighs a slim 5,840 kg and is therefore predestined for work that requires a low floor load. Folding railings also ensure a stage height of only 2.34 m, which makes it easier for the user to handle transport and low clearance heights.
The standard differential lock rounds off the profile of the PB S171-16ES.

The scissor lift S275-14ES 4×4 offers a working height of 27.50 m and is perfect for working in higher altitudes. Its construction length is 6.60 m with a width of just 1.40 m and a height of 4.22 m. The mega-deck platform manages a space of 6.15 mx 1.20 m, but can be extended within seconds by platform displacement to 7.65 mx 1.20 m. In combination with 750 kg lifting capacity and a registration of up to 4 people, this creates a more than decent package “for the height”.

Despite its impressive dimensions, the machine can be maneuvered precisely and flexibly in any position thanks to stepless proportional control (drive, lift, lower) and 2-axle steering. An exhaust-free electro-hydraulic motor and a 4-wheel drive drives the stage persistently and powerfully in interior applications. Even when completely extended, the PB S320-14ES can be moved easily.
Alternatively, the scissor lift is also available as PB S320-14E without support system.

The scissor lift S320-14ES 4×4 offers a working height of 31.87 m and a load capacity of 750kg, making it perfect for working in higher altitudes. Its construction length is 6.60 m with a width of just 1.40 m and a height of 4.22 m.
Already in the standard version, the Mega-Deck platform offers a space of 6.15 mx 1.20 m, but within seconds it can be lowered to max. Extend 7.65 m x 1.20 m. In combination with 750 kg lifting capacity and a registration of up to 4 people, this creates a more than decent package “for the height”.

Despite its impressive dimensions, the machine can be maneuvered precisely and flexibly in any position thanks to stepless proportional control (drive, lift, lower) and 2-axle steering. An exhaust-free electro-hydraulic motor and a 4-wheel drive drives the stage persistently and powerfully in interior applications. Even when completely extended, the PB S320-14ES can be moved easily.

The scissor lift PB S151-12E with a working height of 15.00 m offers a lifting capacity of an impressive 550 kg – both indoors and out. Like all PB scissor lifts the PB S151-12E can be moved in full height.

With its proportional control, the 90 ° steering angle, and the small turning radius of only 2.83 m, the S151-12E is extremely flexible and suitable for a wide range of different jobs. In addition, with the powerful front-wheel drive of the machine (2200 NM gear torque) and the standard differential lock and 25% slope are no problem.

The scissor lift PB S151-12ES differs from the S151-12E by the support, which offers up to 200mm level compensation. With just the push of a button, the machine levels automatically within a few seconds. This allows an exactly vertical or parallel stroke to the object with optimum stability. The ES series can also be operated without supports and is thus (like all PB models) movable in full height.

The standard differential lock completes the profile of the PB S151-12ES.

The scissor lift S171-12E of the PB TOP12 series, which is approved for indoor use, offers a working height of 17.10 m and a load capacity of 400 kg thanks to its compact design. With a push, the work platform can be set to max. Extend 3.90 m x 1.19 m. This platform shift not only provides more work space for up to 2 workers, tools and material, but also allows easy bridging of obstacles.

With its sensitive proportional control in combination with the existing 90 ° steering and a low turning radius of just 2.83 m, the PB S171-12E is extremely flexible and suitable for a wide range of different tasks.
A standard differential lock and the movability of the stage in full height, complete the profile of the scissors successfully.

The scissor lift PB S171-12ES with a working height of 17.10 m differs from the S171-12E by the support system which offers up to 200 mm level compensation. With just the push of a button, the machine levels automatically within a few seconds. This allows an exactly vertical or parallel stroke to the object with optimum stability. However, the ES series can also be used without a support, ie like a “normal” scissor lift and can therefore be moved in full (like all PB models).

The standard differential lock rounds off the profile of the PB S171-12ES.

The scissor lift S195-12E offers a working height of 19.60 m and a lifting capacity of 600 kg. With its sensitive proportional control (drive, lift, lower) in combination with the existing 90 ° steering and a low turning radius of just 3.89 m, the PB S195-12E is extremely flexible and suitable for a wide range of different jobs.

PB’s unique dual scissor system provides a secure feel even when the platform is fully extended and still weighs only 8,820 kg (16,000 pounds). This allows in conjunction with the retractable railing a minimum of effort during transport.
A standard differential lock and the movability of the stage in full height, complete the profile of the scissors successfully.

The scissor lift PB S195-12ES with a working height of 19.60 m differs from the S195-12E by the patented support system, which offers up to 200 mm level compensation. With just the push of a button, the machine levels automatically within a few seconds. This enables an exactly vertical or parallel stroke to the object with optimum stability. The ES series can also be used as a “normal” scissor lift – without support – and is (like all PB models) movable in full height.

The standard differential lock completes the profile of the PB S195-12ES.

The indoor platform approved S225-12E scissor lift of the PB TOP12 series has a working height of 22.50 m and a payload of 450kg.
The platform can be adjusted to a max. Expand to 5.48 m x 1.19 m. This shuffle not only creates more work space for up to 2 workers, tools and material, but also allows easy bridging of obstacles.

The low self-weight of the PB S225-12E of 9,750 kg and the possibility to reach a height of only 2.91 m by folding in the railings also facilitate easy transport of the platform. A standard differential lock and the movability of the stage in full height, complete the profile of the scissors successfully.

The scissor lift S225-12ES of the PB TOP12 series is unique on the market with its technical features. At a working height of 22.50 m and a width of only 1.22 m, this PB scissors not only have an indoor certification but also an outdoor approval and can therefore be used astonishingly flexibly.
This is made possible by the patented support system, which gives the user an additional plus in stability while working. The PB scissor lift equals the height of a common curb, for example, with a self-leveling support stroke of 380 mm at the push of a button. in tight inner-city deployments quite simply.

The S275-18ES 4×4 belongs to the category of narrow and high scissor lifts.
With a working height of only 27.50 m and a width of just 1.80 m, it is perfectly suited for working in high altitudes where space is limited. With 750 kg load capacity on the max. 8.40 m x 1.80 m platform is a frequent lifting of the past, because in addition to up to 4 people even heavy material and tools can be easily lifted up.

For strong and durable propulsion, the electro-hydraulic drive and the standard differential lock are responsible. A 25% climbing ability completes the overall package of driving characteristics outstanding. Incidentally, the scissor lift can also be fully operated in your indoor or outdoor use.
In the stand, the fully automatic support system ensures within seconds that work on high exterior facades directly on the object can be realized easily and safely, even on uneven ground conditions. Alternatively, the scissor lift is also available as PB S275-18E without support system.

The S320-18ES 4×4 belongs to the category of narrow and extremely high scissor lifts. With a working height of 32.14m and a width of “only” 1.80m, it is ideally suited for working in high altitudes where space is limited.
With 750 kg load capacity on the max. 8.40 m x 1.80 m platform is a frequent lifting of the past, because in addition to up to 4 people even heavy material and tools can be easily lifted up.

For strong and durable propulsion, the electro-hydraulic drive and the standard differential lock are responsible. A 25% climbing ability completes the overall package of driving characteristics outstanding. Incidentally, the scissor lift can also be fully operated in your indoor or outdoor use.

Due to its excellent maneuverability and compact dimensions, the Haulotte Optimum8 can be used for be used optimally in industry, craft, or rental. The device offers proportional and fast movements and is approved for indoor and outdoor use. Standard doors are no obstacle.

Maximum safety is achieved by tilting and tilting (Pot Hole). The tires are non-marking and can also be used on sensitive soils.
The compact electric scissor lifts are extremely robust and require minimal maintenance.

The S151-19E HT 4×4 belongs to the innovative 4×4 TOP19 series. With a working height of 15.44 m, it is easy to reach mid-high locations – both indoors and outdoors.
The platform can be extended by automatic shifting to a mega-deck measuring 6.36 mx 1.88 m. Enough space for up to 4 people, equipment and tools. The lifting capacity of the platform of an impressive 750 kg provides more than enough “power reserves”.

With a steering angle of 80 ° and a low turning radius of only 3.90 m, the scissors can be moved flexibly and agile, not least due to the sensitive proportional control (drive, lift, lower). Full height traversability, a 30% climbing ability and a standard swing axle complete the ride specifications of the stage.

The S175-19E 4×4 belongs to the innovative 4×4 TOP19 series. With a working height of 17.80 m, medium-high layers can be easily reached – both indoors and outdoors.
The platform can be extended by automatic shifting to a mega-deck measuring 6.36 mx 1.88 m. Enough space for up to 4 people, equipment and tools. The lifting capacity of the platform of strong 500 kg provides the necessary “power reserves”.

With a steering angle of 80 ° and a low turning radius of only 3.90 m, the scissors can be moved flexibly and agile, not least due to the sensitive proportional control (drive, lift, lower). Full height traversability, a 30% climbing ability and a standard swing axle complete the ride specifications of the stage.

The Haulotte Compact 8N combines intelligent design with robust features for exceptional durability and efficiency. It includes a shock-resistant counterweight with integrated cable protection, AC motors, and a charging plug. Reinforced guardrails with an additional vertical post provide maximum durability.

The lift offers versatile access with foldable guardrails and forklift pockets, and can be operated at full height without additional load restrictions. It features proportional movements for precise control, an ergonomic top control box with a handle and joystick, and excellent maintenance options with Haulotte’s battery care management and diagnostic tools.

With non-marking solid rubber tires, the Compact 8N is ideal for both indoor and outdoor use, including on sensitive floors. Its compact size and maneuverability make it perfect for industrial, craft, and rental applications. The platform extension adds 0.92 meters to the working area, enhancing its versatility.

 

The Haulotte Compact 10N features an intelligently designed, robust construction that ensures maximum durability and efficiency. It includes a shock-resistant counterweight with integrated ladder, AC motors, and a charging plug. The reinforced guardrails, which feature an additional vertical post, further enhance the lift’s durability.

This model offers versatile access with foldable guardrails and both side and longitudinal forklift pockets. It can be operated at full height without additional load restrictions, making it suitable for a wide range of job sites. The lift delivers a unique user experience with proportional movements for precise control, supported by an ergonomic top control box with a handle and joystick.

Maintenance is streamlined with Haulotte’s Activ’Energy Management for battery care and onboard machine adjustment and diagnostic tools, including Haulotte Diag, Activ’Screen, and Sherpal telematics solutions. The lift features grey, non-marking solid rubber tires (15 x 5), making it suitable for use on sensitive floors.

The Compact 10N’s exceptional maneuverability and compact size make it ideal for industrial, craft, and rental applications. The platform extension increases the working area by 0.92 meters, and the machine can be driven at full height, enhancing its versatility for both indoor and outdoor use.

The Haulotte Compact 10 scissor work platform offers 10m working height and a platform with the maximum dimensions: 3.32m x 1.17m.
Due to its excellent maneuverability and compact dimensions, the Compact 10 can be used optimally in industry, trade or rental, for example.

With the platform extension, the working area in the platform is extended by 0.92m. The machine can be moved to full height and has gray non-marking wheels and can also be used on sensitive floors both indoors and outdoors.

  • Smart robust design
  • Impact-resistant counterweight with integrated conductor protection, AC motors and charging plug
  • Reinforced railings with additional vertical rail for maximum durability
  • Maximized potential
  • Access to all construction sites: folding railings, side and longitudinal forklift pockets
  • IN/OUT usage* when traveling at full height and without additional load restrictions
  • Unique user experience
  • Proportional movements for precise driving (AC motors)
  • Ergonomic upper control box with grab handle and joystick
  • Unbeatable ease of maintenance
  • Haulotte Activ’Energy Management for battery care
  • On-board machine setting and diagnostic tools with Haulotte Diag, Haulotte Activ’Screen and Sherpal telematics solution
  • Solid rubber tires, non-marking gray, 15 x 5
  • can be moved to its full height
  • foldable railing
  • Indoor and outdoor approval

The S225-24ES 4×4 of the TOP 24 series combines the elements “space”, “power” and “range”. It offers on your max. 7.20 mx 2.36 m mega deck platform with a whopping 750 kg load capacity. Even with fully extended 22.3m, the device can be moved.
Whether large-scale installation, installation work or maintenance work Outdoor on the building or indoor on large industrial sites – with the S225-24ES 4×4 you are prepared for it.

Within seconds, unevenness of the floor is leveled out with the automatic support system at the push of a button. This increases the application possibilities by a multiple, so can be, for example. Working on high external facades, even on irregular ground, directly and simply on the object.

The S225-24DS 4×4 of the TOP 24 series combines the elements “space”, “force” and “range”. It offers on your max. 7.20 mx 2.36 m mega deck platform with a whopping 750 kg load capacity. In addition to up to 4 people is thus the entrainment of heavy material and tools absolutely no problem.
Even when fully extended, the device can be moved. Whether large-scale installation, assembly work or maintenance work on the construction site or in the industrial area – with the S225-24DS 4×4 you are prepared for it.

To make the process as easy as possible on heavy, uneven surfaces, the powerful Deutz diesel engine, the standard differential lock and all-wheel drive ensure proper propulsion and the necessary balance. A climbing ability of 30% also benefits the stage.
Regardless of what activities ultimately occur, with the PB S225-24DS 4×4 you can do it sensitively and smoothly, as all functions of the stage (drive, lift, lower) are proportional.

  • Smart robust design
  • Impact-resistant counterweight with integrated conductor protection, AC motors and charging plug
  • Reinforced railings with additional vertical rail for maximum durability
  • Maximized potential
  • Access to all construction sites: folding railings, side and longitudinal forklift pockets
  • IN/OUT usage* when traveling at full height and without additional load restrictions
  • Unique user experience
  • Proportional movements for precise driving (AC motors)
  • Ergonomic upper control box with grab handle and joystick
  • Unbeatable ease of maintenance
  • Haulotte Activ’Energy Management for battery care
  • On-board machine setting and diagnostic tools with Haulotte Diag, Haulotte Activ’Screen and Sherpal telematics solution
  • Solid rubber tires, non-marking gray, 15 x 5
  • can be moved to its full height
  • foldable railing
  • Indoor and outdoor approval

    The Haulotte Compact 12 scissor work platform offers a working height of 11.75m and a platform with the maximum dimensions: 3.23m x 1.17m.
    Due to its excellent maneuverability and compact dimensions, the Compact 12 can be used optimally in industry, trade or rental, for example.

    With the platform extension, the working area in the platform is extended by 0.92m.   The turning radius is 1.83m.  The Compact 12 can be used on sensitive floors indoors and outdoors and can be moved to its full height.

The 2.40m wide scissor lift S275-24ES 4×4 offers 27,50m working height and 900kg load capacity for up to 4 persons plus material and tools. The platform can be moved to max. 8.40 m x 2.25 m. The machine can be maneuvered via stepless, jerk-free proportional control; so the operator retains full control of the device even in limited space.

A 4-wheel drive and a 2-axle steering provide the necessary flexibility and maneuverability. The S275-24ES 4×4 has both an inside and an outside license and can be moved in full height.

The scissor lift S320-24ES 4×4 offers 32.14 m working height and a carrying capacity of 750kg for 4 persons plus material and tools.
The platform can be moved to max. Expand to 8.40 m by 2.25 m. The machine can be maneuvered via stepless, jerk-free proportional control for all movements (drive, lift, lower). This keeps the operator in full control of the device even in limited space.

A standard 4-wheel drive and a 2-axle steering bring the necessary flexibility and maneuverability. The drive operates electro-hydraulically, so it is free from emissions and also suitable for use in confined spaces. The S320-24ES 4×4 has both an indoor and an outdoor license and can be moved in full height.

The Haulotte Compact 14 scissor work platform offers a working height of 13.75m and a platform with the maximum dimensions: 3.23m x 1.17m.
Due to its excellent maneuverability and compact dimensions, the Compact 14 can be used optimally in industry, trade or rental, for example.

With the platform extension, the working area in the platform is extended by 0.92m.   The turning radius is 1.83m.  The Compact 14 can be used on sensitive floors and can be moved to its full height.

  • Smart robust design
  • Impact-resistant counterweight with integrated conductor protection, AC motors and charging plug
  • Reinforced railings with additional vertical rail for maximum durability
  • Maximized potential
  • Access to all construction sites: folding railings, side and longitudinal forklift pockets
  • Unique user experience
  • Proportional movements for precise driving (AC motors)
  • Ergonomic upper control box with grab handle and joystick
  • Unbeatable ease of maintenance
  • Haulotte Activ’Energy Management for battery care
  • On-board machine setting and diagnostic tools with Haulotte Diag, Haulotte Activ’Screen and Sherpal telematics solution
  • Solid rubber tires, non-marking gray, 15 x 5
  • can be moved to its full height
  • foldable railing

A powerful diesel drive with four-wheel drive ensures a gradeability of 40% for the Haulotte Compact 10 DX.
It is ideally suited for tough off-road use thanks to the hydraulic differential lock, coarse foam-filled tires, sturdy workmanship and high ground clearance.

Another advantage is the large platform load capacity of 565 kg and the full traversability. The platform can be manually extended by a 1.20m extension.

The scissor lift PB ECo S80-12EL combines compact equipment dimensions with high load capacity. Slim design with 2.49 m length, 1.18 m width and 2.25 m height meets enormous 550 kg lifting capacity. The scissor lift offers a working height of 8.00 m and can even carry up to 4 people on the 1.20 m wide platform – both indoors and out.
With a low turning radius of just 2.30 m and a 90 ° steering, the machine can be moved very flexibly in use. Be it during installation, installation or maintenance work – the scissor lift of the PB ECo series quickly finds its way even in confined spaces.
In no time at all, the railing of the stage can be folded in, which minimizes the transport height to only 1.65 m. Taking into account the other slim design and low weight, a transport can therefore be conveniently and easily realized.

A powerful diesel drive with all-wheel drive ensures a climbing ability of 40% on the Haulotte Compact 12 DX.
It is ideal for tough outdoor use thanks to the hydraulic differential lock, large-tread foam-filled tires, robust workmanship and high ground clearance.

Another advantage is the large platform load capacity of 450 kg and the ability to move to its full height. The platform can be manually extended by 1.20 m with an extension.