Produkte Archive - Page 4 of 5 - Rothlehner Arbeitsbühnen

The Haulotte Compact 14 scissor work platform offers a working height of 13.75m and a platform with the maximum dimensions: 3.23m x 1.17m.
Due to its excellent maneuverability and compact dimensions, the Compact 14 can be used optimally in industry, trade or rental, for example.

With the platform extension, the working area in the platform is extended by 0.92m. The turning radius is 1.83m. The Compact 14 can be used on sensitive floors and can be moved to its full height.

Smart robust design
Impact-resistant counterweight with integrated conductor protection, AC motors and charging plug
Reinforced railings with additional vertical rail for maximum durability
Maximized potential
Access to all construction sites: folding railings, side and longitudinal forklift pockets
Unique user experience
Proportional movements for precise driving (AC motors)
Ergonomic upper control box with grab handle and joystick
Unbeatable ease of maintenance
Haulotte Activ’Energy Management for battery care
On-board machine setting and diagnostic tools with Haulotte Diag, Haulotte Activ’Screen and Sherpal telematics solution
Solid rubber tires, non-marking gray, 15 x 5
can be moved to its full height
foldable railing

A powerful diesel drive with four-wheel drive ensures a gradeability of 40% for the Haulotte Compact 10 DX.
It is ideally suited for tough off-road use thanks to the hydraulic differential lock, coarse foam-filled tires, sturdy workmanship and high ground clearance.

Another advantage is the large platform load capacity of 565 kg and the full traversability. The platform can be manually extended by a 1.20m extension.

The scissor lift PB ECo S80-12EL combines compact equipment dimensions with high load capacity. Slim design with 2.49 m length, 1.18 m width and 2.25 m height meets enormous 550 kg lifting capacity. The scissor lift offers a working height of 8.00 m and can even carry up to 4 people on the 1.20 m wide platform – both indoors and out.
With a low turning radius of just 2.30 m and a 90 ° steering, the machine can be moved very flexibly in use. Be it during installation, installation or maintenance work – the scissor lift of the PB ECo series quickly finds its way even in confined spaces.
In no time at all, the railing of the stage can be folded in, which minimizes the transport height to only 1.65 m. Taking into account the other slim design and low weight, a transport can therefore be conveniently and easily realized.

A powerful diesel drive with all-wheel drive ensures a climbing ability of 40% on the Haulotte Compact 12 DX.
It is ideal for tough outdoor use thanks to the hydraulic differential lock, large-tread foam-filled tires, robust workmanship and high ground clearance.

Another advantage is the large platform load capacity of 450 kg and the ability to move to its full height. The platform can be manually extended by 1.20 m with an extension.

The PB ECo S140-12EL with electric direct drive and 14m working height is a scissor lift of the compact class. The platform has a size of 2.26 mx 1.15 m and is equipped with a load capacity of 320 kg. An additional displacement of 0.90 m in the longitudinal direction increases the platform to max. 3.16 m x 1.15 m, which means that 2 people can fit inside, including material and tools.
With a length of 2.49 m, a width of 1.18 m, and a total height of 2.65 m, the scissor lift presents itself comparatively slim. With the easy folding railing, the height can be reduced to a low 2.03 m. Due to its low weight of 3,300 kg at 14m working height, your 90 ° steering and the small turning radius, the PB ECo S140-12EL is fast and manoeuvrable – and this also without problems in full height.

The fully electric Haulotte HA16E and HA16E Pro differ in that the latter features a swing axle and 4×4 all-wheel steering. This gives the Pro model even better traction off-road.

Both models are equipped with Haulotte’s PULSEO technology with a range extender, which promises fast charging.

PULSEO – this is the range of all-terrain electric boom lifts that incorporate Haulotte’s latest innovations and concentrated expertise. The HA16 E and HA16 E PRO meet Haulotte’s highest quality standards. They undergo rigorous endurance testing and accelerated life cycle testing to ensure their longevity. All models in the PULSEO generation come with a 5-year warranty. Thanks to its versatility, the PULSEO HA16 E articulated boom lift is an indispensable asset on the construction site, from the first day right through to the last.

See the product video below.

The main features of this articulated telescopic work platform are compact dimensions and the “up and over” function for overcoming obstacles. Various drive concepts with batteries, mains or combustion engines allow for indoor and outdoor use.

The TM16GTi is an update of the earlier TM15GT; The device now has 15cm more working height, namely 15.75m, and a shorter overall length. The other performance data is 8.1m lateral reach and 220kg basket load across the entire work chart.

The TM16GTi has a 1.3 m long movable basket arm and a rotating work basket, which makes maneuvering at height particularly easy. The proportional, electro-hydraulic control is easy to maintain and user-friendly. A home function is standard. Optional features include automatic support.

Product video see below

With the SIGMA 16 and the SIGMA 16 PRO, Haulotte presents two innovations in the class of electric articulated telescopic platforms.
The unrestricted load capacity of the platform is 230kg. The machine has a double joint, on the telescopic boom of which a 130° angled jib is mounted. (The jib of the Pro model can also be swiveled horizontally by 110 degrees.)
Together with the basket that can be rotated by 180°, the Sigma 16 can also reach difficult-to-access areas.

The maximum horizontal outreach is 8.35m, the Up&Over height is at 7,6m. Two functions can be operated at the same time. The total length in the transport position is 6.60 m with a total height of two meters.
The Sigma 16 can be used indoors and outdoors, e.g. B. in work platform rental, for maintenance, assembly work, renovation, or industrial halls.

With the SIGMA 16 and the SIGMA 16 PRO, Haulotte presents two innovations in the category of electric articulated telescopic platforms.
The machines have a double joint on the telescopic boom of which a cage arm that can be angled by 130° is mounted. In contrast to the Sigma 16, the Sigma 16 Pro also has a 3D jib arm, i.e. the cage arm can also be swiveled horizontally (by 110°). Together with the 180° rotatable basket, the Sigma 16 Pro can also reach hard-to-reach areas.

The Pro model offers a working height of 15.70 m, a lateral reach of 8.05 m and a basket load of 230 kg throughout the entire working diagram.
The maximum range in the Up & Over encroachment of 7.6 meters is 8.35 meters. The journey takes 90 seconds from the floor to the full working height, and two functions can be operated at the same time. The total length in the transport position is 6.65 m with a total height of two meters.
The Sigma 16 can be used indoors and outdoors, e.g. B. in work platform rental, for maintenance, assembly work, renovation, or industrial halls.

With the B220PXE Compact (and B240PX Compact), GSR introduces a new series of aerial platforms featuring vertical outriggers.
The compact, straight-down support system minimizes the required setup area and allows operation even in confined spaces. Vertical outriggers are more user-friendly and practical than traditional slanted supports.

The B220PXE Compact reaches a working height of approximately 21.5 m and offers a side outreach of up to 11.2 m at 120 kg basket load. The robust work basket carries 250 kg (two persons) and is equipped with hydraulic quick deployment and vertical outriggers at both front and rear.

Optional features include automatic outrigger leveling, 230 V drive, 230 V socket in the basket, as well as custom RAL colors and other practical accessories for specific applications.

Like all GSR platforms, the B220PXE stands for durability and easy operation. Standard equipment includes electro-hydraulic proportional controls, a 180° rotating basket, outrigger pads, a 450° rotation range, and more.
Optional extras include automatic outrigger leveling, beacons, custom RAL paint finishes, side panels, and protective edges for tree-cutting work.
We are happy to advise you on the ideal configuration for your specific application.

Self-Propelled Articulated Telescopic Work Platforms are compact, maneuverable and can be moved from the platform to the working position, increasing productivity.

The Haulotte HA16RTJ offers a multi-motion function that allows multiple movements to be driven simultaneously. The basket is 165 ° rotatable and whopping 1.83m wide; The basket is movable by 140 °. So the operator comes to his destination quickly.

The HA16RTJ offers four-wheel drive with 2-wheel steering
The HA16RTJ O offers a pendulum axle at the front to compensate for unevenness better.

The HA16RTJ Pro also offers a 4-wheel steering, as well as the standard Haulotte Activ’Shield © Bar

Self-Propelled Articulated Telescopic Work Platforms are compact, maneuverable and can be moved from the platform to the working position, increasing productivity.

The Haulotte HA16RTJ Pro offers a multi-motion function which allows multiple movements to be driven simultaneously. The basket is 165 ° rotatable and whopping 1.83m wide; The basket is movable by 140 °. So the operator comes to his destination quickly. The external turning radius of the all-wheel-drive HA16RTJ Pro is only 3.75m.
The HA16RTJ Pro offers 4-wheel steering, as well as the standard Haulotte Activ’Shield © Bar.

Self-Propelled Articulated Telescopic Work Platforms are compact, maneuverable and can be moved from the platform to the working position, increasing productivity.

The Haulotte HA20RTJ offers a multi-motion function which allows multiple movements to be driven simultaneously. The basket is 180 ° rotatable and whopping 1.83m wide; The basket is movable by 140 °. So the operator comes to his destination quickly.

Self-Propelled Articulated Telescopic Work Platforms are compact, maneuverable and can be moved from the platform to the working position, increasing productivity.

The Haulotte HA20RTJ PRo offers a multi-motion function which allows multiple movements to be driven simultaneously. The basket is 180 ° rotatable and whopping 1.83m wide; The basket is movable by 140 °. So the operator comes to his destination quickly.
The HA20RTJ Pro has a 4-wheel steering, a front swing axle, and the Haulotte Activ’Shield © Bar as standard

The PB ECo S160-14EZ-Li is the top model of the PB ECo series and reaches a working height of 15.70 m. It has efficient lithium batteries, which means that emission-free AC traction motors are used. Thanks to the precise proportional control, the stage can be moved smoothly and the platform can be raised and lowered vertically.

The platform of the stage offers generous dimensions of 2.67 m x 1.37 m and can be extended to a maximum of 3.58 m x 1.37 m by an additional offset of 0.91 m in the longitudinal direction. This means that 2 workers have enough space for indoor use and 1 worker for outdoor use, including materials and tools.

The PB ECo S160-14EZ-Li impresses with its compactness with a length of 2.87 m, a width of 1.40 m and a total height of 2.68 m. Thanks to the easily foldable railing, the transport height can be reduced to a remarkably low 2. 15 m can be reduced, which allows you to easily overcome even narrow passages.

Thanks to its low weight of 3,310 kg, its 90° steering and the small turning radius, the PB ECo S160-14EZ-Li is quick and agile to maneuver – even at full height.

The PB ECo S56-7EL belongs to the PB mini scissors due to its slim design with dimensions of only 1.53 m x 0.76 m x 1.97 m. The compact stage is powered by a powerful, quiet and emission-free electric direct drive.
The control of the S56-7EL is proportional, that is absolutely sensitive and smooth. These features allow even inexperienced users to work flexibly and quickly in very tight spaces. An automatic. On the one hand, hinged perforated protection ensures great ground clearance and at the same time provides additional safety.

With a working height of 5.60 m, the S56-7EL can be ideally used as a ladder alternative and can even be moved in full height. The three-level expandable platform offers max. 1.95 m long x 0.70 m wide and has a license for 2 people indoors and 1 person outdoors. Overall, the platform for workers, materials and tools has a strong 240 kg load capacity.

The scissor lift only weighs 915 kg. The total height can be reduced to 1.82 m by folding railings. This promotes uncomplicated transport and passage of standard doors. Even journeys in common elevators are so easily possible.

The fully electric all-wheel-drive boom lift HA20 E Pro marks the beginning of a new era in access equipment.
This articulated telescopic lift with a fully electric drive delivers strong performance and can be used as a full replacement for a diesel-powered boom lift.

With a working height of 20 m and a lateral outreach of 11.9 m, it is ideal for maintenance, installation, and façade work. The fully electric drive enables quiet, emission-free operation – perfect for city centers and indoor use. It offers a 45° gradeability and 360° continuous rotation, making it suitable even for rough terrain. The platform capacity can optionally be increased to 350 kg. Haulotte Activ’Shield Bar is included as standard.

Thanks to all-wheel steering, a pendulum axle, and proportional controls, the HA20 E Pro stands out for its precise handling and excellent off-road capability. The intelligent energy management system reduces consumption and significantly extends operating time.

This model is also available in a simplified version without Pro equipment,
excluding, among others: Activ’Shield Bar, all-wheel steering, pendulum axle, and the 350 kg platform capacity option.

Self-Propelled Articulated Telescopic Work Platforms are compact, maneuverable and can be moved from the platform to the working position, increasing productivity.

The Haulotte HA26RTJ PRo offers a multi-motion function that allows multiple movements to be driven simultaneously. The basket is 180 ° rotatable and a whopping 2.44m wide; the jib is movable by 133 °. So the operator comes to his destination quickly.
The HA26RTJ Pro has four-wheel drive with 4-wheel steering, as well as the Haulotte Activ’Shield © Bar as standard.

Self-Propelled Articulated Telescopic Work Platforms are compact, maneuverable and can be moved from the platform to the working position, increasing productivity.

The Haulotte HA32RTJ PRo offers a multi-motion function that allows multiple movements to be driven simultaneously. The basket is 180 ° rotatable and a whopping 2.44m wide; The basket is movable by 140 °. So the operator comes to his destination quickly.
The HA32RTJ Pro has a four-wheel drive with 4-wheel steering and front swing axle, the axles are telescopic for more stability. The device offers an unrestricted workspace with 250kg basket load throughout the working diagram. The full working height is reached within 95 seconds.

The Haulotte HT 23 RTJ Pro offers 22,50m working height, 18,30m reach and 230kg basket load. The basket load can be optionally increased to 450kg.

There is a powerful diesel engine with all-wheel drive available, which makes gradients up to 40% possible. These devices are particularly suitable for hard outdoor use in construction site operation. High work efficiency is achieved through proportional and simultaneous control. The jib has a movable jawbar 133 °, as well as a rotatable basket 175 °, in order to optimally reach the place of use.

The Haulotte HT 28 RTJ Pro offers 28m working height, 350kg basket load and 23.85m range (the highest range of all Haulotte telescopic self-propelled vehicles).

There is a powerful diesel engine with all-wheel drive available, which makes gradients up to 45% possible. These devices are particularly suitable for hard outdoor use in construction site operation. High work efficiency is achieved through proportional and simultaneous control. The jib has a movable jaw 133 °, as well as a rotatable basket 180 °, in order to reach the place of use optimally.

The minimum passage width of less than 0.90 m at a height of less than 2.0 m allows the DENKA•LIFT Narrow to be inserted through every standard door.
The low weight and the standard, variable outriggers with two working areas also allows for use in confined spaces. The Narrow can be operated with the standard 3-wheel drive, driven by the 24 V battery drive, extremely quiet and emission-free.

Especially for special indoor applications, the Narrow has its advantages: low floor load, small passage width, variable support and a high horizontal outreach.

Especially for special indoor applications, the Narrow has its advantages: low floor load, small passage width, variable support and a high lateral reach.

With the B220TJ, GSR offers a jib device of the latest generation.
The operator has a working height of 21.80m, a basket load of 250 kg and a maximum horizontal outreach of 14m. The jib can be moved by 130°; In combination with the basket that can be rotated by 180°, even difficult locations can be perfectly controlled.

The device with electrohydraulic control uses H-stabilisers that can be extended at the front and rear. The stabilization can be chosen variably, i.e. narrow, wide or to one side. Automatic Levelling and the “Home-Function” as well as the “walk-in” basket with easy access are optional.

The B220TJ is aimed at professional landlords, building cleaners, tree cutters, electrical and many more.

The GSR E140TJV on the municipal all-round chassis Multicar Fumo.

movable Korbarm 130 °, proportional control electrohydraulic, GFK basket, support control from the work basket.

A number of optional equipment options are available

The main features of this 18m articulated telescopic work platform are compact dimensions and the “up and over” function for overcoming obstacles.
The TM18GTi has a 1.3m long movable basket arm and a rotating work basket, which makes maneuvering at height particularly easy. The proportional, electro-hydraulic control is easy to maintain and user-friendly.

Various drive concepts with batteries, mains or combustion engines allow for indoor and outdoor use.
The standard drive is a 230V mains drive and a petrol direct drive with speed control. A “home function” is also included as standard.

All Europelift work platforms are characterized by easy operation and purpose-oriented equipment.

Product video see below

Working height: 21.00 m
Basket load: 220 kg / 2 people
Rotation range: 365°
Lateral reach: approx. 11.00 m / 100 kg
Net weight: approx. 2,620 kg
Passage width: 1.79 m
Headroom: 2.10 m
Total length: 6.33 m
Outrigger width: 3.85 m

proportional control
Internal energy supply
Drive mains 230 V
Gasoline direct drive
Articulated telescopic boom steel
1.3 m long jib, articulated 85°
Aluminum work basket, rotatable 2 x 45°
Basket size: approx. 0.80 x 1.20 x 1.10 m
Tool storage in the work basket
hour meter
hydraulic outriggers
Shunting drive hydraulic
Automatic levelling
home function
Shims 40 x 40 x 2.7 cm with holder

Simple operation, longevity and high value retention characterize the Denka devices. Like all DENKA•LIFT models, the DK 18 also offers a large working range and fast, precise movements.

The powerful hydraulic maneuvering drive is standard and makes it quicker to move the work platform on site. Thanks to the sensitive proportional control and the rotatable work basket, even difficult jobs can be done safely and quickly.

Compared to the DL18, the DENKA•LIFT DK18 shows the basket in the direction of travel to the rear. The special advantage of the DK design is the lower weight (less than 2t).

High stability, long working range and fast, precise movements characterize the Denka devices. Like all DENKA•LIFT models, the DL 18 is a long-lasting and maintenance-friendly work platform with high value retention.

Compared to the DK18, the DENKA•LIFT DL18 has the basket in the direction of travel above the drawbar.
The big brother of the DL18 is the DENKA•LIFT DL21 with three meters more working height.

High stability, long working range and fast, precise movements characterize the Denka devices. Like all DENKA•LIFT models, the DL 21 has a pleasing design and a high build quality.

The high-performance hydraulic shunting drive is fitted as standard and makes it quick to move the stage to the respective place of use. Thanks to the sensitive proportional control and the rotatable work basket, even difficult jobs can be done safely and quickly.

The Haulotte HT 43 RTJ Pro offers 42.20m working height, 20.20m lateral reach and 230kg basket load. The basket load can be optionally increased to 450kg.

There is a powerful diesel engine with all-wheel drive available. The 4-wheel steering makes gradients of up to 40% possible. These devices are particularly suitable for hard outdoor use in construction site operation. High work efficiency is achieved through proportional and simultaneous control. The boom has a movable basket 160 °, as well as a rotatable basket 180 °, in order to move optimally to the place of use.

Compact dimensions and high maneuverability are the benefits of the Haulotte Star6 Picking Telescopic Mast Work Platform. Especially for indoor applications with small footprint and narrow passage passages, these devices have advantages due to their compactness. The Star 6 Picking has compared to the Star 6 a shelf with folding side walls and railing. This makes it ideal for picking and other warehouse logistics.

Compact dimensions and high maneuverability are the advantages of the telescopic mast work platforms. The concept of the Haulotte Star 8 has proven itself; Especially in indoor applications with small footprint and narrow passage passages it has advantages through its compactness.

With the articulated arm lateral reach up to 3 m is possible and the devices can be moved even when fully extended.
Practical tool trays, operating hours counter, abrasion-free tires and fully automatic chargers complete the standard equipment.

Like all DENKA•LIFT models, the DL 25 also offers a large working range and fast, precise movements thanks to the stable aluminum telescopic boom. Simple operation, versatility and a high degree of serviceability characterize the Denka models.

Thanks to the sensitive proportional control even difficult operations can be done safely and quickly.
The DENKA•LIFT DL 25 is powered by the 8 built-in 6 V batteries. Driving and operation of the supports are possible from the work basket.

In comparison to the DK25 the DENKA•LIFT DL25 has the basket in the direction of travel above the drawbar (see further details)

Like all DENKA•LIFT models, the DK 25 also offers a long working range and fast, precise movements thanks to the stable aluminum telescopic boom.
The powerful hydraulic maneuvering drive is standard and makes it quicker to move the work platform on site. Thanks to the sensitive proportional control and the rotatable work basket, even difficult jobs can be done safely and quickly.

Simple operation, versatility and a high degree of serviceability characterize the Denka models.
The DK 25 can be precisely controlled to the object with its two operating joysticks and the rotatable work basket ensures efficient work parallel to the object, even for two people.

Compact dimensions and high maneuverability are the advantages of the telescopic mast work platforms. The concept of the Haulotte Star 10 has proven itself; Especially in indoor applications with small footprint and narrow passage passages it has advantages through its compactness.

The DENKA•LIFT DL30 is the world’s highest trailer platform with 30m working height and 3,500kg total weight.

Hybrid drive, compact dimensions with 1.72 m width and minimum passage height of 1.95 m!
Thus, the DL30 finds its use in indoor and outdoor – and has been proven for years in craft, industry, rental and public facilities.

The QuickUp series are lightweight, compact passenger lifts for indoor use. Especially on sensitive ground they play their advantages, e.g. in gymnasiums, concert halls, tiled floors, etc. The QuickUp series brings the operator up to 7 m to 14 m working height. They can even be transported in a pickup truck.

The QuickUp series has a large selection of machines for every need, 2 versions available – with power supply via three-phase (AC) or battery (DC). The non-marking tires and feet with rubber protection protect the floor. Due to their compact shape, they fit through doors and in elevators. Fast commissioning by one person. Good price-performance ratio due to minimal maintenance.

The E260PXJ can be displayed, for example, on Mercedes, MAN or Iveco. It uses a variable H-support, with which the device can be supported on one side narrow or wide (see working diagram). Thus, there are advantages especially in confined spaces.

The “up-and-over” function of the articulated telescopic truck aerial work platforms allows the overcoming of building protrusions and other obstacles. The high lateral reach of the 7,5to models, as well as the payload capacity and their stability are their decisive advantages.

The robust and maintenance-friendly design and the sensitive proportional control offer the user maximum ease of use. High basket loads, wide work baskets and a range of individual equipment options characterize the easy-to-use and easy-to-maintain equipment. Individual carrier vehicle and support variations provide customized solutions.

Compared to the GSR E180TJ Compact, the Comfort version has front extendable outriggers. Due to the wider outriggerssurface, a larger lateral reach of up to 13.95m can be achieved.
The telescope truck platform E180TJ with 18,20m working height can be displayed on a 7.5 ton chassis. A wide range of accessories is available, some of which are already included in the standard equipment of the device.

The E180TJ has a 135 ° movable jib; The basket can be turned 155 °.
The high product quality of the telescopic boom with full lateral reach is ensured by reliable technical solutions and by a selected interaction of special steels and special profiles.

The GSR E320PXJ Comfort can be realized on various chassis. There is a wide range of options and optional extras available. There are H-supports used, as an option is u.a. an automatic function with variable support available.

The “up-and-over” function of the articulated telescopic truck aerial work platforms allows the overcoming of building protrusions and other obstacles. The high lateral reach of the large truck models as well as the payload capacity and their stability are their decisive advantages.

The GSR E360PXJ Comfort truck platform has been further developed on the concept of the GSR E320PXJ Comfort.
This model can be mounted on various carrier vehicles and offers optimum user benefits thanks to proven components such as the electro-hydraulic control, the variable support and an optionally available automatic jacking system.

The E360PXJ is currently the flagship of GSR. The operator has a working height of 36 m and an overall height of over 12 m. The maximum lateral reach of 22.20m is achieved even with full basket load of 320kg.
This model can be mounted on a variety of carrier vehicles, such as a 4 × 4 all-terrain chassis, and offers optimum user benefits thanks to proven components such as electrohydraulic control, movable jib, variable support and optional automatic outriggers

The telescope truck platform E180TJ with 18,20m working height can be displayed on a 7.5 ton chassis. A wide range of accessories is available, some of which are already included in the standard equipment of the device.
Compared to the GSR E180TJ Comfort, the Compact version has vertical outriggers at the front AND front. Due to the narrower outriggers surface of the Compact has sometimes advantages in operations cramped space.

The GSR B220TJ can e.g. be built on a Mercedes Benz Atego 4 × 4 as in this case.

Whether tree care, signage, electrical installation, properties, or street and Christmas lighting, with a wide range of equipment options and carrier vehicles, your individual requirements can be met.

The all-terrain vehicle with single tires offers 22 m working height, a lateral reach of over 13.0 m and a basket load of 250 kg. Vertical stabilisers ensure a secure stand even in the field.

Dimensions: L: 7.31 m H: 3.45 m

Mit dem B220TJ bietet GSR ein Korbarm-Gerät der neusten Generation. Das 21,80m Teleskop-Modell basiert auf demselben Baukastensystem wie die erfolgreichen Baureihen B180T, B200T und B230T.
Dem Bediener stehen 21,80m Arbeitshöhe, 250kg Korblast und maximal 14,00m seitliche Reichweite zur Verfügung. Der Korbarm ist um 130° beweglich; in Kombination mit dem um 180° drehbaren Korb können selbst schwierige Einsatzorte perfekt angesteuert werden.

Bei dem Gerät mit elektrohydraulischer Steuerung kommen vorne und hinten ausfahrbare H-Stützen zum Einsatz. Die Abstützung kann variabel gewählt werden, also schmal, breit oder zu einer Seite.

Unter anderem ist folgende optionale Ausstattung realisierbar: Abstütz-Automatik und “Home-Funktion”, sowie eine doppelte 1.000V Isolation.

Der Aufbau B220TJ ist auch auf 5,5t Fahrgestell oder 7,5t Fahrgestell darstellbar.